Date: Wed, 18 Nov 2009 15:49:18 +0200 From: Andriy Gapon <avg@icyb.net.ua> To: Travelling Particle <166162@gmail.com> Cc: freebsd-usb@freebsd.org Subject: Re: [keyboard] ukbd stops working after filesystems mount at boot time Message-ID: <4B03FB5E.5070308@icyb.net.ua> In-Reply-To: <da6b214d0911180425r2b720333r87fe2fb79e3e13e1@mail.gmail.com> References: <da6b214d0911180425r2b720333r87fe2fb79e3e13e1@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
on 18/11/2009 14:25 Travelling Particle said the following: > Hello, > > I am not sure if the problem is with USB, because the same hardware works > fine with LiveCD. I will seek help here first, please feel free to redirect > me to a better place for advice. > > The system is 8.0-RC3. > > I am booting off USB stick because I have to attach root partition on HDD > with GELI. It all works fine, I am able to enter passphrase on the keyboard > (there's only ukbd keyboard in the kernel at this moment, but I had tried > with atkbd as well; I have also experimented with or without TEKEN with no > difference). After root partition is mounted, system mounts other geli > partitions on the same hard disk. It is right after the filesystems were > mounted that the problem starts. The output on console at that moment starts > to be interleaved with new lines symbols. After late boot stage completes, I > see login prompt on console, but system acts *as if* I had just pressed > Enter and presents login prompt again and again. The keyboard itself appears > to be dead. If I choose to boot single-mode, behavior is the same -- I see > multiple shell prompts as if I were hitting Enter repeatedly. I had been > trying various configurations in the kernel for over 5 days now, and still > couldn't make the console work on the system (I can login via network > though). > > The hardware is Nvidea ION-based Acer nettop. It does not come with PS/2 > keyboard connector and I cannot test it with any keyboard but USB. The > keyboard itself I am using is Acer's standard one, and it works fine with > LiveCD. I wonder if GELI might mess the things up, but the geli attachment > process goes well, and all filesystems are attached just fine. LiveCD is also 8.0-RC3? -- Andriy Gapon
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4B03FB5E.5070308>