Date: 21 Jun 96 16:01:47 EDT From: Berend de Boer <100120.3121@CompuServe.COM> To: FreeBSD stable <freebsd-stable@freebsd.org> Subject: Second ISA bus hd controller not found Message-ID: <960621200147_100120.3121_EHQ126-2@CompuServe.COM>
next in thread | raw e-mail | index | archive | help
Hello FreeBSD gurus,
I've an old 486DX/33Mhz ISA bus machine running FreeBSD fine. However it does
not detect the second hd controller. I've a card in it with two hd controllers,
only the first one is detected. I like to have it detect the second one because
I'm short on diskspace.
My kernel is compiled with wdc1 support as can be seen from my messages file
below. My hardware is configured with secondary controller enabled. I've not
tested it with any other OS/machine, so I'm not sure the hardware is OK,
although the card is new.
Any help is appreciated.
Here the startup messages:
FreeBSD 2.1.0-RELEASE #0: Fri Apr 26 15:22:38 MET DST 1996
berend@auke.deboer:/usr/src/sys/compile/AUKE
CPU: i486DX (486-class CPU)
real memory = 16777216 (16384K bytes)
avail memory = 14962688 (14612K bytes)
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
ed1 not found at 0x300
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
sio2 not found at 0x3e8
sio3 not found at 0x2e8
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
lpt1 not found at 0xffffffff
lpt2 not found at 0xffffffff
mse0: wrong signature ff
mse0 not found at 0x23c
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 765
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <QUANTUM TRB850A>
wd0: 810MB (1660176 sectors), 1647 cyls, 16 heads, 63 S/T, 512 B/S
wdc0: unit 1 (atapi): <CS-R36 1/36M1.141>, removable, intr, iordy
wcd0: 344Kb/sec, 48831Kb cache, audio play, 255 volume levels, ejectable tray
wcd0: 120mm data disc loaded, unlocked
wdc1 not found at 0x170
matcdc0 not found at 0x230
scd0 not found at 0x230
ie0 not found at 0x360
1 3C5x9 board(s) on ISA found at 0x300
ep0 at 0x300-0x30f irq 10 on isa
ep0: aui/bnc/utp[*BNC*] address 00:a0:24:76:70:3b irq 10
ix0 not probed due to I/O address conflict with ep0 at 0x300
lnc1 not probed due to I/O address conflict with ep0 at 0x300
npx0 on motherboard
npx0: INT 16 interface
lpd[107]: restarted
Groetjes,
Berend.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?960621200147_100120.3121_EHQ126-2>