Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 22 Oct 2004 10:00:42 GMT
From:      x86br <x86br@yahoo.com.br>
To:        freebsd-gnats-submit@FreeBSD.org
Subject:   misc/72997: Network performance down
Message-ID:  <200410221000.i9MA0g0T018276@www.freebsd.org>
Resent-Message-ID: <200410221000.i9MA0ogH015368@freefall.freebsd.org>

next in thread | raw e-mail | index | archive | help

>Number:         72997
>Category:       misc
>Synopsis:       Network performance down
>Confidential:   no
>Severity:       non-critical
>Priority:       high
>Responsible:    freebsd-bugs
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Fri Oct 22 10:00:50 GMT 2004
>Closed-Date:
>Last-Modified:
>Originator:     x86br
>Release:        5.3RC1 STABLE & 6.0-Current
>Organization:
Software House
>Environment:
FreeBSD freebsd1.sct.embrapa.br 6.0-CURRENT FreeBSD 6.0-CURRENT #0: Thu Oct 21 22:02:53 BRST 2004     root@freebsd1.xxx.xxxxxx.xx:/usr/src/sys/i386/compile/MYKERNEL  i386
>Description:
      # cvsupdate
Parsing supfile "cvs-supfile"
Connecting to cvsup2.FreeBSD.org
Connected to cvsup2.FreeBSD.org
Server software version: SNAP_16_1h
Negotiating file attribute support
Exchanging collection information
Establishing multiplexed-mode data connection
Running
Updating collection src-all/cvs
TreeList failed: Network write failure: ChannelMux.ProtocolError
Will retry at 18:43:42

I've also noticed data corruption in the form of failed CRCs (And hence 
dropped SSH connections) while transferring large amounts of data via SSH 
over gige to a machine on its subnet. These problems started occuring 
after the giant-less networking megacommit. Older kernels check out 
without any such issues.

-bash-2.05b# pciconf -l -v 
agp0@pci0:0:0:  class=0x060000 card=0x80f61043 chip=0x25788086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82875P/E7210 DRAM Controller / Host-Hub Interface'
    class    = bridge
    subclass = HOST-PCI
pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x25798086 rev=0x02 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82875P PCI-to-AGP Bridge'
    class    = bridge
    subclass = PCI-PCI
uhci0@pci0:29:0:        class=0x0c0300 card=0x80a61043 chip=0x24d28086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1'
    class    = serial bus
    subclass = USB
uhci1@pci0:29:1:        class=0x0c0300 card=0x80a61043 chip=0x24d48086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2'
    class    = serial bus
    subclass = USB
uhci2@pci0:29:2:        class=0x0c0300 card=0x80a61043 chip=0x24d78086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3'
    class    = serial bus
    subclass = USB
uhci3@pci0:29:3:        class=0x0c0300 card=0x80a61043 chip=0x24de8086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4'
    class    = serial bus
    subclass = USB
ehci0@pci0:29:7:        class=0x0c0320 card=0x80a61043 chip=0x24dd8086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801EB/ER (ICH5/ICH5R) USB EHCI Controller'
    class    = serial bus
    subclass = USB
pcib2@pci0:30:0:        class=0x060400 card=0x00000000 chip=0x244e8086 rev=0xc2 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82801BA/CA/DB/DBL/EB/ER (ICH2/3/4/4-L/5/5R), 6300ESB Hub Interface to PCI Bridge'
    class    = bridge
    subclass = PCI-PCI
isab0@pci0:31:0:        class=0x060100 card=0x00000000 chip=0x24d08086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801EB/ER (ICH5/ICH5R) LPC Interface Bridge'
    class    = bridge
    subclass = PCI-ISA
atapci1@pci0:31:1:      class=0x01018a card=0x80a61043 chip=0x24db8086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801EB/ER (ICH5/ICH5R) EIDE Controller'
    class    = mass storage
    subclass = ATA
atapci2@pci0:31:2:      class=0x01018f card=0x80a61043 chip=0x24d18086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801EB (ICH5) SATA Controller'
    class    = mass storage
    subclass = ATA
none0@pci0:31:3:        class=0x0c0500 card=0x80a61043 chip=0x24d38086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801EB/ER (ICH5/ICH5R) SMBus Controller'
    class    = serial bus
    subclass = SMBus
pcm0@pci0:31:5: class=0x040100 card=0x80f31043 chip=0x24d58086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller'
    class    = multimedia
    subclass = audio
nvidia0@pci1:0:0:       class=0x030000 card=0x00000000 chip=0x018510de rev=0xc1 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    device   = 'NV18.6? GeForce4 MX 4000'
    class    = display
    subclass = VGA
fwohci0@pci2:3:0:       class=0x0c0010 card=0x808a1043 chip=0x30441106 rev=0x80 hdr=0x00
    vendor   = 'VIA Technologies Inc'
    device   = 'VT6306 VIA Fire II IEEE-1394 OHCI Link Layer Controller'
    class    = serial bus
    subclass = FireWire
atapci0@pci2:4:0:       class=0x010400 card=0x80f51043 chip=0x3373105a rev=0x02 hdr=0x00
    vendor   = 'Promise Technology Inc'
    device   = 'PDC20378? FastTrak  RAID Controller'
    class    = mass storage
    subclass = RAID
skc0@pci2:5:0:  class=0x020000 card=0x80eb1043 chip=0x170010b7 rev=0x12 hdr=0x00
    vendor   = '3COM Corp, Networking Division'
    device   = '3C940 and 3C2000 Gigabit Ethernet PCI CODEC?'
    class    = network
    subclass = ethernet

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.3-STABLE #1: Wed Oct 20 21:37:31 BRST 2004
    root@freebsd1.xxx.xxxxxx.xx:/usr/src/sys/i386/compile/MYKERNEL
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (2998.57-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf34  Stepping = 4
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Hyperthreading: 2 logical CPUs
real memory  = 1072889856 (1023 MB)
avail memory = 1036169216 (988 MB)
ACPI APIC Table: <A M I  OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <A M I OEMXSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82875P host to AGP bridge> mem 0xe8000000-0xefffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P1 - AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
nvidia0: <GeForce4 MX 4000> mem 0xd0000000-0xd7ffffff,0xfd000000-0xfdffffff irq 16 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
pci0: <serial bus, USB> at device 29.0 (no driver attached)
pci0: <serial bus, USB> at device 29.1 (no driver attached)
pci0: <serial bus, USB> at device 29.2 (no driver attached)
pci0: <serial bus, USB> at device 29.3 (no driver attached)
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
fwohci0: <VIA Fire II (VT6306)> port 0xdc00-0xdc7f mem 0xfeaff800-0xfeafffff irq 20 at device 3.0 on pci2
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:e0:18:00:00:73:3e:7c
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
atapci0: <Promise PDC20378 SATA150 controller> port 0xd880-0xd8ff,0xdfa0-0xdfaf,0xdf00-0xdf3f mem 0xfeac0000-0xfeadffff,0xfeafe000-0xfeafefff irq 23 at device 4.0 on pci2
atapci0: failed: rid 0x20 is memory, requested 4
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
ata4: channel #2 on atapci0
skc0: <3Com 3C940 Gigabit Ethernet> port 0xd400-0xd4ff mem 0xfeaf8000-0xfeafbfff irq 22 at device 5.0 on pci2
skc0: 3Com Gigabit LOM (3C940)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:0e:a6:bc:98:ce
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH5 UDMA100 controller> port 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci1
ata1: channel #1 on atapci1
atapci2: <Intel ICH5 SATA150 controller> port 0xef60-0xef6f,0xefa8-0xefab,0xefa0-0xefa7,0xefac-0xefaf,0xefe0-0xefe7 irq 18 at device 31.2 on pci0
ata5: channel #0 on atapci2
ata6: channel #1 on atapci2
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH5 (82801EB)> port 0xee80-0xeebf,0xe800-0xe8ff mem 0xfebff400-0xfebff4ff,0xfebff800-0xfebff9ff irq 17 at device 31.5 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <Analog Devices AD1985 AC97 Codec>
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcf7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acd0: CDRW <AOPEN COM5232/AAH/1.09> at ata1-slave UDMA33
ad10: 114473MB <ST3120026AS/3.56> [232581/16/63] at ata5-master SATA150
SMP: AP CPU #1 Launched!
cd0 at ata1 bus 0 target 1 lun 0
cd0: <AOPEN COM5232/AAH 1.09> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Mounting root from ufs:/dev/ad10s1a
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xef00-0xef1f irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xef20-0xef3f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xef40-0xef5f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xef80-0xef9f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebffc00-0xfebfffff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
ehci_pci_attach: companion usb2
ehci_pci_attach: companion usb3
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
boot() called on cpu#1
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...3 2 1 1 0 0 0 done
No buffers busy after final sync
Uptime: 1h0m14s
Shutting down ACPICopyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.0-CURRENT #0: Thu Oct 21 22:02:53 BRST 2004
    root@xxxxxx.xxxx.xxxxxx.xx:/usr/src/sys/i386/compile/MYKERNEL
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (2998.57-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf34  Stepping = 4
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Hyperthreading: 2 logical CPUs
real memory  = 1072889856 (1023 MB)
avail memory = 1036169216 (988 MB)
ACPI APIC Table: <A M I  OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <A M I OEMXSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82875P host to AGP bridge> mem 0xe8000000-0xefffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P1 - AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
nvidia0: <GeForce4 MX 4000> mem 0xd0000000-0xd7ffffff,0xfd000000-0xfdffffff irq 16 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
pci0: <serial bus, USB> at device 29.0 (no driver attached)
pci0: <serial bus, USB> at device 29.1 (no driver attached)
pci0: <serial bus, USB> at device 29.2 (no driver attached)
pci0: <serial bus, USB> at device 29.3 (no driver attached)
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
fwohci0: <VIA Fire II (VT6306)> port 0xdc00-0xdc7f mem 0xfeaff800-0xfeafffff irq 20 at device 3.0 on pci2
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:e0:18:00:00:73:3e:7c
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
atapci0: <Promise PDC20378 SATA150 controller> port 0xd880-0xd8ff,0xdfa0-0xdfaf,0xdf00-0xdf3f mem 0xfeac0000-0xfeadffff,0xfeafe000-0xfeafefff irq 23 at device 4.0 on pci2
atapci0: failed: rid 0x20 is memory, requested 4
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
ata4: channel #2 on atapci0
skc0: <3Com 3C940 Gigabit Ethernet> port 0xd400-0xd4ff mem 0xfeaf8000-0xfeafbfff irq 22 at device 5.0 on pci2
skc0: 3Com Gigabit LOM (3C940)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:0e:a6:bc:98:ce
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH5 UDMA100 controller> port 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci1
ata1: channel #1 on atapci1
atapci2: <Intel ICH5 SATA150 controller> port 0xef60-0xef6f,0xefa8-0xefab,0xefa0-0xefa7,0xefac-0xefaf,0xefe0-0xefe7 irq 18 at device 31.2 on pci0
ata5: channel #0 on atapci2
ata6: channel #1 on atapci2
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH5 (82801EB)> port 0xee80-0xeebf,0xe800-0xe8ff mem 0xfebff400-0xfebff4ff,0xfebff800-0xfebff9ff irq 17 at device 31.5 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <Analog Devices AD1985 AC97 Codec>
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcf7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acd0: CDRW <AOPEN COM5232/AAH/1.09> at ata1-slave UDMA33
ad10: 114473MB <ST3120026AS/3.56> [232581/16/63] at ata5-master SATA150
SMP: AP CPU #1 Launched!
cd0 at ata1 bus 0 target 1 lun 0
cd0: <AOPEN COM5232/AAH 1.09> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Mounting root from ufs:/dev/ad10s1a
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xef00-0xef1f irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xef20-0xef3f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xef40-0xef5f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xef80-0xef9f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebffc00-0xfebfffff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
ehci_pci_attach: companion usb2
ehci_pci_attach: companion usb3
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
>How-To-Repeat:
      Using network....
>Fix:
      
>Release-Note:
>Audit-Trail:
>Unformatted:



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200410221000.i9MA0g0T018276>