Date: Mon, 15 Dec 2014 00:41:59 +0000 From: Paul Chakravarti <paul.chakravarti@gmail.com> To: freebsd-virtualization@freebsd.org Subject: Re: bhyverun - mptable/smbios table requires mapped mem Message-ID: <E2FEEEC8-D26B-47F7-B27C-AECFEF12400E@gmail.com> In-Reply-To: <6A5FD6A7-E3B2-4323-A21D-3770E7C3742E@gmail.com> References: <6A5FD6A7-E3B2-4323-A21D-3770E7C3742E@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
s/demise/dmesg/ Autocorrect in action! > On 15 Dec 2014, at 00:35, Paul Chakravarti = <paul.chakravarti@gmail.com> wrote: >=20 > Hello, >=20 > I was just trying out bhyve on a server (demise below) and got the = following problems -=20 >=20 >=20 > # sh /usr/share/examples/bhyve/vmrun.sh -c 1 -m 512K -t tap0 -d = vm0.img -i -I ./FreeBSD-10.1-RELEASE-amd64-bootonly.iso vm0 > Launching virtual machine "vm0" ... > Consoles: userboot =20 > FreeBSD/amd64 User boot, Revision 1.1 > (root@releng1.nyi.freebsd.org, Tue Nov 11 20:57:23 UTC 2014) > Loading /boot/defaults/loader.conf=20 >=20 > /boot/kernel/kernel text=3D0xf8f898 data=3D0x124a30+0x2055c0 = syms=3D[0x8+0x1405e0+0x8+0x15b077] > Booting... > mptable requires mapped mem >=20 >=20 > After a bit of digging around I found the =E2=80=98-Y=E2=80=99 option = for bhyve(8) (inhibit MPtable generation) and temporarily patched vmrun = to pass this option and then got the following error >=20 > /boot/kernel/kernel text=3D0xf8f898 data=3D0x124a30+0x2055c0 = syms=3D[0x8+0x1405e0+0x8+0x15b077] > Booting... > smbios table requires mapped mem > Assertion failed: (error =3D=3D 0), = function main, file /usr/src/usr.sbin/bhyve/bhyverun.c, line 839. > Abort trap (core dumped) >=20 > Any ideas? >=20 > Paul >=20 >=20 >=20 >=20 > Copyright (c) 1992-2014 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, = 1994 > The Regents of the University of California. All rights = reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 10.1-RELEASE #0 r274401: Tue Nov 11 21:02:49 UTC 2014 > root@releng1.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64 > FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) = 20140512 > module vtnet already present! > CPU: Intel(R) Xeon(R) CPU E3-1245 V2 @ 3.40GHz (3400.09-MHz K8-class = CPU) > Origin =3D "GenuineIntel" Id =3D 0x306a9 Family =3D 0x6 Model =3D = 0x3a Stepping =3D 9 > = Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE= ,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > = Features2=3D0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SS= SE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSX= SAVE,AVX,F16C,RDRAND> > AMD Features=3D0x28100800<SYSCALL,NX,RDTSCP,LM> > AMD Features2=3D0x1<LAHF> > Structured Extended Features=3D0x281<FSGSBASE,SMEP,ERMS> > VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID > TSC: P-state invariant, performance statistics > real memory =3D 34359738368 (32768 MB) > avail memory =3D 33200242688 (31662 MB) > Event timer "LAPIC" quality 600 > ACPI APIC Table: <ALASKA A M I> > FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs > FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > cpu2 (AP): APIC ID: 2 > cpu3 (AP): APIC ID: 3 > cpu4 (AP): APIC ID: 4 > cpu5 (AP): APIC ID: 5 > cpu6 (AP): APIC ID: 6 > cpu7 (AP): APIC ID: 7 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > random: <Software, Yarrow> initialized > kbd1 at kbdmux0 > acpi0: <ALASKA A M I> on motherboard > acpi0: Power Button (fixed) > acpi0: reservation of 67, 1 (4) failed > cpu0: <ACPI CPU> on acpi0 > cpu1: <ACPI CPU> on acpi0 > cpu2: <ACPI CPU> on acpi0 > cpu3: <ACPI CPU> on acpi0 > cpu4: <ACPI CPU> on acpi0 > cpu5: <ACPI CPU> on acpi0 > cpu6: <ACPI CPU> on acpi0 > cpu7: <ACPI CPU> on acpi0 > hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on = acpi0 > Timecounter "HPET" frequency 14318180 Hz quality 950 > Event timer "HPET" frequency 14318180 Hz quality 550 > atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 > atrtc0: Warning: Couldn't map I/O. > Event timer "RTC" frequency 32768 Hz quality 0 > attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 > Timecounter "i8254" frequency 1193182 Hz quality 0 > Event timer "i8254" frequency 1193182 Hz quality 100 > Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem = 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 > agp0: <IvyBridge server GT2 IG> on vgapci0 > agp0: aperture size is 256M, detected 65532k stolen memory > vgapci0: Boot video device > pcib2: <ACPI PCI-PCI bridge> irq 19 at device 6.0 on pci0 > pci2: <ACPI PCI bus> on pcib2 > pci0: <simple comms> at device 22.0 (no driver attached) > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf7e04000-0xf7e043ff = irq 16 at device 26.0 on pci0 > usbus0: EHCI version 1.0 > usbus0 on ehci0 > pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 > pci3: <ACPI PCI bus> on pcib3 > pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 > pci4: <ACPI PCI bus> on pcib4 > em0: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0xe000-0xe01f = mem 0xf7d00000-0xf7d1ffff,0xf7d20000-0xf7d23fff irq 17 at device 0.0 on = pci4 > em0: Using MSIX interrupts with 3 vectors > em0: Ethernet address: 30:85:a9:a6:c6:93 > pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 > pci5: <ACPI PCI bus> on pcib5 > xhci0: <ASMedia ASM1042 USB 3.0 controller> mem 0xf7c00000-0xf7c07fff = irq 19 at device 0.0 on pci5 > xhci0: 32 byte context size. > usbus1 on xhci0 > ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf7e03000-0xf7e033ff = irq 23 at device 29.0 on pci0 > usbus2: EHCI version 1.0 > usbus2 on ehci1 > pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci6: <ACPI PCI bus> on pcib6 > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > ahci0: <Intel Cougar Point AHCI SATA controller> port = 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f = mem 0xf7e02000-0xf7e027ff irq 19 at device 31.2 on pci0 > ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported > ahcich0: <AHCI channel> at channel 0 on ahci0 > ahcich1: <AHCI channel> at channel 1 on ahci0 > ahciem0: <AHCI enclosure management bridge> on ahci0 > acpi_button0: <Power Button> on acpi0 > acpi_tz0: <Thermal Zone> on acpi0 > acpi_tz1: <Thermal Zone> on acpi0 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > orm0: <ISA Option ROM> at iomem 0xce800-0xcf7ff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=3D0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on = isa0 > ppc0: cannot reserve I/O port range > est0: <Enhanced SpeedStep Frequency Control> on cpu0 > p4tcc0: <CPU Frequency Thermal Control> on cpu0 > est1: <Enhanced SpeedStep Frequency Control> on cpu1 > p4tcc1: <CPU Frequency Thermal Control> on cpu1 > est2: <Enhanced SpeedStep Frequency Control> on cpu2 > p4tcc2: <CPU Frequency Thermal Control> on cpu2 > est3: <Enhanced SpeedStep Frequency Control> on cpu3 > p4tcc3: <CPU Frequency Thermal Control> on cpu3 > est4: <Enhanced SpeedStep Frequency Control> on cpu4 > p4tcc4: <CPU Frequency Thermal Control> on cpu4 > est5: <Enhanced SpeedStep Frequency Control> on cpu5 > p4tcc5: <CPU Frequency Thermal Control> on cpu5 > est6: <Enhanced SpeedStep Frequency Control> on cpu6 > p4tcc6: <CPU Frequency Thermal Control> on cpu6 > est7: <Enhanced SpeedStep Frequency Control> on cpu7 > p4tcc7: <CPU Frequency Thermal Control> on cpu7 > ZFS filesystem version: 5 > ZFS storage pool version: features support (5000) > Timecounters tick every 1.000 msec > random: unblocking device. > usbus0: 480Mbps High Speed USB v2.0 > usbus1: 5.0Gbps Super Speed USB v3.0 > usbus2: 480Mbps High Speed USB v2.0 > ugen2.1: <Intel> at usbus2 > uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on = usbus2 > ugen1.1: <0x1b21> at usbus1 > uhub1: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on = usbus1 > ugen0.1: <Intel> at usbus0 > uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on = usbus0 > uhub1: 4 ports with 4 removable, self powered > ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 > ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device > ses0: SEMB SES Device > ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 > ada0: <ST33000650NS 0004> ATA-8 SATA 3.x device > ada0: Serial Number Z295PC3C > ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) > ada0: Command Queueing enabled > ada0: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C) > ada0: Previously was known as ad4 > ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 > ada1: <ST33000650NS 0004> ATA-8 SATA 3.x device > ada1: Serial Number Z295PTNZ > ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) > ada1: Command Queueing enabled > ada1: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C) > ada1: Previously was known as ad6 > SMP: AP CPU #1 Launched! > SMP: AP CPU #3 Launched! > SMP: AP CPU #7 Launched! > SMP: AP CPU #5 Launched! > SMP: AP CPU #2 Launched! > SMP: AP CPU #4 Launched! > SMP: AP CPU #6 Launched! > Timecounter "TSC-low" frequency 1700046150 Hz quality 1000 > Root mount waiting for: usbus2 usbus0 > uhub2: 2 ports with 2 removable, self powered > uhub0: 2 ports with 2 removable, self powered > Root mount waiting for: usbus2 usbus0 > ugen0.2: <vendor 0x8087> at usbus0 > uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr = 2> on usbus0 > ugen2.2: <vendor 0x8087> at usbus2 > uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr = 2> on usbus2 > Root mount waiting for: usbus2 usbus0 > uhub3: 6 ports with 6 removable, self powered > uhub4: 8 ports with 8 removable, self powered > Trying to mount root from zfs:tank/root []=E2=80=A6 >=20 >=20
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E2FEEEC8-D26B-47F7-B27C-AECFEF12400E>