Date: Sat, 12 Jul 1997 11:49:20 +0930 (CST) From: Michael Smith <msmith@atrad.adelaide.edu.au> To: kenzen@oneimage.com (ken) Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: damnit Message-ID: <199707120219.LAA27395@genesis.atrad.adelaide.edu.au> In-Reply-To: <33C67D59.4E327E03@oneimage.com> from ken at "Jul 11, 97 12:37:14 pm"
next in thread | previous in thread | raw e-mail | index | archive | help
ken stands accused of saying: > something is still wrong i think, i get flashing lights on > the card and it gives me all the cool messages about where it putting it > and how it sees it, etc etc, then i go to rc.conf and edit everything > set the defaultrouter to my gateway and add the ifconfig_ed0 line and it > tells me cant locate network , cause of the gateway, which i know is > 150% right, because i just used t on linux not an hour ago. > help again First things firs; always include the full text of error messages, and the command(s) that produce them in your problem reports. It's very hard to map what I know of the error messages onto your descriptions otherwise 8) You shouldn't be using the ifconfig_ed0 entry in /etc/rc.conf, you should be using the pccard section below. You _may_ have to add your default route by hand. Note that the pccard hasn't been detected when /etc/rc.network runs, so it can't possibvly assign an address to your card, or add a route via that address. If you read the pccard.conf(5) manpage, you will note that it descibes a script which can be invoked when the card is inserted and removed - you may need to use this to get your interface and routing right. -- ]] Mike Smith, Software Engineer msmith@gsoft.com.au [[ ]] Genesis Software genesis@gsoft.com.au [[ ]] High-speed data acquisition and (GSM mobile) 0411-222-496 [[ ]] realtime instrument control. (ph) +61-8-8267-3493 [[ ]] Unix hardware collector. "Where are your PEZ?" The Tick [[
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199707120219.LAA27395>