Date: Tue, 18 Nov 2014 10:14:35 +0000 From: "Thomas Mueller" <mueller6724@bellsouth.net> To: freebsd-wireless@freebsd.org Subject: Re: D-Link DWA-131 A1 (Realtek RTL8191SU) not working Message-ID: <0B.F5.11722.B0C1B645@dnvrco-oedge02> References: <CAOc73CCDUPcm0W2%2B72Hrr3eAxqSnUfYtuQFOhfrLYMnusf%2BvhQ@mail.gmail.com> <CAOc73CCaeFTwDHfyLx_LXxDSEenzoc9MaqqY6odxh5ZQ1CFJuA@mail.gmail.com> <20141118055615.GA38506@ns.kevlo.org> <CAOc73CCAvLJ6ST_27%2BoEmUTPcQxEQtQAx2CDpp9tC5OR68HMuQ@mail.gmail.com> <CAOc73CC2JyB4s%2B-xTbzwTippqDymPKw_%2B3uLUYsb7fkLNMun%2BA@mail.gmail.com> <20141118070837.GA38861@ns.kevlo.org> <20141118080001.GA39117@ns.kevlo.org>
next in thread | previous in thread | raw e-mail | index | archive | help
from Benjamin Woods: > I am trying to get my D-Link DWA-131 A1 working, with some success but no > network connectivity. > It shows up in my usb list with device id 07d1:3303. The driver pages > suggest this should be working with the rsu(4) driver and potentially > the rsu-rtl8712fw firmware, according to these: > https://www.freebsd.org/cgi/man.cgi?query=rsu&sektion=4 > http://www.undeadly.org/cgi?action=article&sid=20101216231634 > https://wikidevi.com/wiki/D-Link_DWA-131_rev_A1 > I have added the following to /boot/loader.conf and rebooted: > legal.realtek.license_ack=1 > rsu-rtl8712fw_load="YES" > It shows up in ifconfig, and even scans and finds wireless access points. I > have my WPA ssid and psk details for my access point stored in > /etc/wpa_supplicant.conf. I can see from ifconfig that it is trying to > associate with the correct access point ssid and do DHCP, but it never > obtains an IP address. > Has anyone had this issue before? Anyone know how can I go about > troubleshooting this further? On Tue, Nov 18, 2014 at 03:08:37PM +0800, Kevin Lo wrote: > I'm pretty sure. See OpenBSD cvs log: > http://marc.info/?l=openbsd-cvs&m=128897633210060&w=2 > I'll be fixing rsu(4), thanks. I have the same Realtek RTL8191SU chip with Hiro H50191 USB wireless adapter, can't get it to work. So I too want to test the new fix. Will it be for 10.1-STABLE or HEAD? I use mostly HEAD but have also installed 10.0-STABLE. I also notice change in re(4) driver, want to test that for both FreeBSD and OpenBSD 5.6 bsd.rd . Motherboard is MSI Z77 MPOWER. Ethernet is Realtek (re): good with NetBSD, Linux and Haiku, (Free,Open and DragonFly)BSD bug out. Only Internet connection for FreeBSD is Hiro H50191 USB-stick wireless adapter, chipset RTL8191SU, device rsu. Sometimes it connects. Running ifconfig (by itself), I get, whether connection is working or not, lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6> inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> rsu0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290 options=1<RXCSUM> ether 00:13:33:a2:86:f0 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: IEEE 802.11 Wireless Ethernet autoselect mode 11g status: associated wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 ether 00:13:33:a2:86:f0 inet 192.168.0.102 netmask 0xffffff00 broadcast 192.168.0.255 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: IEEE 802.11 Wireless Ethernet OFDM/54Mbps mode 11g status: associated ssid Maclura_pomifera channel 8 (2447 MHz 11g) bssid a0:f3:c1:f9:39:7a country US authmode WPA2/802.11i privacy ON deftxkey UNDEF AES-CCM 2:128-bit txpower 0 bmiss 7 scanvalid 60 bgscan bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5 protmode CTS roaming MANUAL Looks good, but running host on a valid domain, such as host bluegrass.net gives me ;; connection timed out; no servers could be reached I am in NetBSD-current amd64 now, use NetBSD to update FreeBSD src, ports and doc trees with subversion. Tom
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?0B.F5.11722.B0C1B645>