Date: Tue, 2 Jun 1998 17:35:18 -0400 From: Rick Siple <RickSiple@mpainc.com> To: "Questions Mailing List (E-mail)" <freebsd-questions@FreeBSD.ORG> Subject: User PPP Message-ID: <11FFBC5E23EDD111AF8D006008CEB82D014D41@EXCHANGESERVER>
next in thread | raw e-mail | index | archive | help
Sorry for yet another question regarding PPP, but I am unable to connect to the network at my office. We are using the Windows NT RAS services. The server is configure to accept any login down to clear text, but I would prefer to use CHAP. It seems to have to do with the CHAP/PAP authentication, but neither works. I installed the DES libraries (libdes only) and rebuilt ppp, noting the addition of the DES related setting. This activated the "set encrypt MSChap" option in my ppp.conf, but I still can not connect to the NT RAS server at my office. Attached is the ppp.conf file and ppp log file, just the LCP output, this seems to be where the problem is. NT RAS seems to be rejecting the CHAP auth protocol. Previous to installing the DES libraries ppp would request "CHAP (0x05)" authentication. NT RAS seemed to want "CHAP (0x80)" authentication. Now they both say on "CHAP (0x80)" but still won't negotiate a connection. The mpa-office entry in ppp.conf is obviously the one being used. Thanks for any help you can give. ppp.conf: # Default setup. Always executed when PPP is invoked. # default: allow users * set device /dev/cuaa1 set speed 38400 set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" ATE1Q0 OK-AT-OK \\dATDT\\T TIMEOUT 40 CONNECT" mpa-office: enable lqr enable chap disable pap set encrypt MSChap set log local warning error alert lcp set log warning error alert lcp set phone 9,5738965 set authname rick set authkey <deleted> set openmode active set ifaddr 10.0.0.1/24 10.0.0.1/24 255.255.255.0 ppp.log: Jun 2 17:09:11 rick3 ppp[5271]: Phase: Using interface: tun0 Jun 2 17:09:11 rick3 ppp[5271]: Phase: PPP Started. Jun 2 17:09:38 rick3 ppp[5271]: LCP: State change Initial --> Closed Jun 2 17:09:38 rick3 ppp[5271]: LCP: State change Closed --> Stopped Jun 2 17:09:39 rick3 ppp[5271]: LCP: LcpSendConfigReq Jun 2 17:09:39 rick3 ppp[5271]: LCP: ACFCOMP[2] Jun 2 17:09:39 rick3 ppp[5271]: LCP: PROTOCOMP[2] Jun 2 17:09:39 rick3 ppp[5271]: LCP: ACCMAP[6] 0x00000000 Jun 2 17:09:39 rick3 ppp[5271]: LCP: MRU[4] 1500 Jun 2 17:09:39 rick3 ppp[5271]: LCP: MAGICNUM[6] 0x5c294e36 Jun 2 17:09:39 rick3 ppp[5271]: LCP: QUALPROTO[8] period 3000 Jun 2 17:09:39 rick3 ppp[5271]: LCP: AUTHPROTO[5] 0xc223 (CHAP 0x80) Jun 2 17:09:39 rick3 ppp[5271]: LCP: State change Stopped --> Req-Sent Jun 2 17:09:39 rick3 ppp[5271]: LCP: Received Configure Request (0) state = Req-Sent (6) Jun 2 17:09:39 rick3 ppp[5271]: LCP: ACCMAP[6] 0x00000000 Jun 2 17:09:39 rick3 ppp[5271]: LCP: AUTHPROTO[5] 0xc223 (CHAP 0x80) Jun 2 17:09:39 rick3 ppp[5271]: LCP: MAGICNUM[6] 0x00003946 Jun 2 17:09:39 rick3 ppp[5271]: LCP: PROTOCOMP[2] Jun 2 17:09:39 rick3 ppp[5271]: LCP: ACFCOMP[2] Jun 2 17:09:39 rick3 ppp[5271]: LCP: MULTIMRRU[4] 064e Jun 2 17:09:39 rick3 ppp[5271]: LCP: MULTIED[23] 015af62580ed9811d1b7 Jun 2 17:09:39 rick3 ppp[5271]: LCP: SendConfigRej(Req-Sent) Jun 2 17:09:39 rick3 ppp[5271]: LCP: MULTIMRRU[4] 064e Jun 2 17:09:39 rick3 ppp[5271]: LCP: MULTIED[23] 015af62580ed9811d1b7 Jun 2 17:09:39 rick3 ppp[5271]: LCP: Received Configure Reject (1) state = Req-Sent (6) Jun 2 17:09:39 rick3 ppp[5271]: LCP: RecvConfigRej. Jun 2 17:09:39 rick3 ppp[5271]: LCP: QUALPROTO[8] proto c025, interval 30000ms Jun 2 17:09:39 rick3 ppp[5271]: LCP: AUTHPROTO[5] 0xc223 (CHAP 0x80) Jun 2 17:09:39 rick3 ppp[5271]: LCP: LcpSendConfigReq Jun 2 17:09:39 rick3 ppp[5271]: LCP: ACFCOMP[2] Jun 2 17:09:39 rick3 ppp[5271]: LCP: PROTOCOMP[2] Jun 2 17:09:39 rick3 ppp[5271]: LCP: ACCMAP[6] 0x00000000 Jun 2 17:09:39 rick3 ppp[5271]: LCP: MRU[4] 1500 Jun 2 17:09:39 rick3 ppp[5271]: LCP: MAGICNUM[6] 0x5c294e36 Jun 2 17:09:39 rick3 ppp[5271]: LCP: AUTHPROTO[5] 0xc223 (CHAP 0x80) Jun 2 17:09:40 rick3 ppp[5271]: LCP: Received Configure Request (1) state = Req-Sent (6) Jun 2 17:09:40 rick3 ppp[5271]: LCP: ACCMAP[6] 0x00000000 Jun 2 17:09:40 rick3 ppp[5271]: LCP: AUTHPROTO[5] 0xc223 (CHAP 0x80) Jun 2 17:09:40 rick3 ppp[5271]: LCP: MAGICNUM[6] 0x00003946 Jun 2 17:09:40 rick3 ppp[5271]: LCP: PROTOCOMP[2] Jun 2 17:09:40 rick3 ppp[5271]: LCP: ACFCOMP[2] Jun 2 17:09:40 rick3 ppp[5271]: LCP: SendConfigAck(Req-Sent) Jun 2 17:09:40 rick3 ppp[5271]: LCP: ACCMAP[6] 0x00000000 Jun 2 17:09:40 rick3 ppp[5271]: LCP: AUTHPROTO[5] 0xc223 (CHAP 0x80) Jun 2 17:09:40 rick3 ppp[5271]: LCP: MAGICNUM[6] 0x00003946 Jun 2 17:09:40 rick3 ppp[5271]: LCP: PROTOCOMP[2] Jun 2 17:09:40 rick3 ppp[5271]: LCP: ACFCOMP[2] Jun 2 17:09:40 rick3 ppp[5271]: LCP: State change Req-Sent --> Ack-Sent Jun 2 17:09:40 rick3 ppp[5271]: LCP: Received Configure Reject (2) state = Ack-Sent (8) Jun 2 17:09:40 rick3 ppp[5271]: LCP: RecvConfigRej. Jun 2 17:09:40 rick3 ppp[5271]: LCP: AUTHPROTO[5] 0xc223 (CHAP 0x80) Jun 2 17:09:40 rick3 ppp[5271]: LCP: LcpSendConfigReq Jun 2 17:09:40 rick3 ppp[5271]: LCP: ACFCOMP[2] Jun 2 17:09:40 rick3 ppp[5271]: LCP: PROTOCOMP[2] Jun 2 17:09:40 rick3 ppp[5271]: LCP: ACCMAP[6] 0x00000000 Jun 2 17:09:40 rick3 ppp[5271]: LCP: MRU[4] 1500 Jun 2 17:09:40 rick3 ppp[5271]: LCP: MAGICNUM[6] 0x5c294e36 Jun 2 17:09:40 rick3 ppp[5271]: LCP: AUTHPROTO[5] 0xc223 (CHAP 0x80) Jun 2 17:09:40 rick3 ppp[5271]: LCP: Received Configure Reject (3) state = Ack-Sent (8) Jun 2 17:09:40 rick3 ppp[5271]: LCP: RecvConfigRej. Jun 2 17:09:40 rick3 ppp[5271]: LCP: AUTHPROTO[5] 0xc223 (CHAP 0x80) Jun 2 17:09:40 rick3 ppp[5271]: LCP: LcpSendConfigReq Jun 2 17:09:40 rick3 ppp[5271]: LCP: ACFCOMP[2] Jun 2 17:09:40 rick3 ppp[5271]: LCP: PROTOCOMP[2] Jun 2 17:09:40 rick3 ppp[5271]: LCP: ACCMAP[6] 0x00000000 Jun 2 17:09:40 rick3 ppp[5271]: LCP: MRU[4] 1500 Jun 2 17:09:40 rick3 ppp[5271]: LCP: MAGICNUM[6] 0x5c294e36 Jun 2 17:09:40 rick3 ppp[5271]: LCP: AUTHPROTO[5] 0xc223 (CHAP 0x80) Jun 2 17:09:40 rick3 ppp[5271]: LCP: Received Configure Reject (4) state = Ack-Sent (8) Jun 2 17:09:40 rick3 ppp[5271]: LCP: RecvConfigRej. Jun 2 17:09:40 rick3 ppp[5271]: LCP: AUTHPROTO[5] 0xc223 (CHAP 0x80) Jun 2 17:09:40 rick3 ppp[5271]: LCP: LcpSendConfigReq Jun 2 17:09:40 rick3 ppp[5271]: LCP: ACFCOMP[2] Jun 2 17:09:40 rick3 ppp[5271]: LCP: PROTOCOMP[2] Jun 2 17:09:40 rick3 ppp[5271]: LCP: ACCMAP[6] 0x00000000 Jun 2 17:09:40 rick3 ppp[5271]: LCP: MRU[4] 1500 Jun 2 17:09:40 rick3 ppp[5271]: LCP: MAGICNUM[6] 0x5c294e36 Jun 2 17:09:40 rick3 ppp[5271]: LCP: AUTHPROTO[5] 0xc223 (CHAP 0x80) Jun 2 17:09:40 rick3 ppp[5271]: LCP: Received Configure Reject (5) state = Ack-Sent (8) Jun 2 17:09:40 rick3 ppp[5271]: LCP: RecvConfigRej. Jun 2 17:09:40 rick3 ppp[5271]: LCP: AUTHPROTO[5] 0xc223 (CHAP 0x80) Jun 2 17:09:40 rick3 ppp[5271]: LCP: LcpSendConfigReq Jun 2 17:09:40 rick3 ppp[5271]: LCP: ACFCOMP[2] Jun 2 17:09:40 rick3 ppp[5271]: LCP: PROTOCOMP[2] Jun 2 17:09:40 rick3 ppp[5271]: LCP: ACCMAP[6] 0x00000000 Jun 2 17:09:40 rick3 ppp[5271]: LCP: MRU[4] 1500 Jun 2 17:09:40 rick3 ppp[5271]: LCP: MAGICNUM[6] 0x5c294e36 Jun 2 17:09:40 rick3 ppp[5271]: LCP: AUTHPROTO[5] 0xc223 (CHAP 0x80) Jun 2 17:09:40 rick3 ppp[5271]: LCP: Received Terminate Request (2) state = Ack-Sent (8) Jun 2 17:09:40 rick3 ppp[5271]: LCP: LcpSendTerminateAck. Jun 2 17:09:40 rick3 ppp[5271]: LCP: State change Ack-Sent --> Req-Sent Jun 2 17:09:41 rick3 ppp[5271]: LCP: Received Terminate Request (3) state = Req-Sent (6) Jun 2 17:09:41 rick3 ppp[5271]: LCP: LcpSendTerminateAck. Jun 2 17:09:43 rick3 ppp[5271]: LCP: LcpSendConfigReq Jun 2 17:09:43 rick3 ppp[5271]: LCP: ACFCOMP[2] Jun 2 17:09:43 rick3 ppp[5271]: LCP: PROTOCOMP[2] Jun 2 17:09:43 rick3 ppp[5271]: LCP: ACCMAP[6] 0x00000000 Jun 2 17:09:43 rick3 ppp[5271]: LCP: MRU[4] 1500 Jun 2 17:09:43 rick3 ppp[5271]: LCP: MAGICNUM[6] 0x5c294e36 Jun 2 17:09:43 rick3 ppp[5271]: LCP: AUTHPROTO[5] 0xc223 (CHAP 0x80) Jun 2 17:09:44 rick3 ppp[5271]: LCP: State change Req-Sent --> Starting Jun 2 17:09:44 rick3 ppp[5271]: LCP: LcpLayerFinish __________ Rick Siple RickSiple@MPAInc.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?11FFBC5E23EDD111AF8D006008CEB82D014D41>