Date: Tue, 22 Apr 2008 19:10:03 GMT From: Fernan Aguero <fernan@iib.unsam.edu.ar> To: freebsd-amd64@FreeBSD.org Subject: Re: amd64/122624: unusable mininal installation of FreeBSD-7.0 Message-ID: <200804221910.m3MJA3Yw064382@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR amd64/122624; it has been noted by GNATS. From: Fernan Aguero <fernan@iib.unsam.edu.ar> To: Mike Meyer <mwm@mired.org> Cc: John Baldwin <jhb@freebsd.org>, freebsd-gnats-submit@freebsd.org, freebsd-amd64@freebsd.org Subject: Re: amd64/122624: unusable mininal installation of FreeBSD-7.0 Date: Tue, 22 Apr 2008 16:06:32 -0300 --ibTvN161/egqYuK8 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit > On Mon, 21 Apr 2008 15:22:47 -0300 Fernan Aguero <fernan@iib.unsam.edu.ar> wrote: > > The answer is that the CD was not OK (but this didn't make > > any difference, as new problems arose, read on ...) > > > > # ISO image is OK > > grep amd64-disc1 7.0-amd64-CHECKSUM.MD5 > > MD5 (7.0-RELEASE-amd64-disc1.iso) = 0232f1b6ffde0e3e76034c9f10791acd > > > > cat 7.0-RELEASE-amd64-disc1.iso | md5sum > > 0232f1b6ffde0e3e76034c9f10791acd - > > > > > > # But burned CD was not OK > > echo $(( $(ls -l 7.0-RELEASE-amd64-disc1.iso | awk '{ print $5 }') / 2048 )) > > 255535 > > > > dd if=/dev/cdrom bs=2048 count=255535 | md5sum > > 255535+0 records in > > 255535+0 records out > > 523335680 bytes (523 MB) copied, 121.408 seconds, 4.3 MB/s > > f6de944affbeb748e7df5337aa91ea8b - > > > > So I trashed this CD and burned the same image again, now > > succesfully: > > dd if=/dev/cdrom bs=2048 count=255535 | md5sum > > 255535+0 records in > > 255535+0 records out > > 523335680 bytes (523 MB) copied, 218.401 seconds, 2.4 MB/s > > 0232f1b6ffde0e3e76034c9f10791acd - > > > > I've now installed FreeBSD-7.0 (amd64) again, several times, > > with either a minimal install + man pages (with or w/o lib32 compatibility) or as a standard install (all default options) and > > again, as before, there are many errors upon boot: > > > > # minimal, no lib32 compatibility > > Trying to mount root from ufs:/dev/ad4s1a > > /libexec/ld-elf.so.1: /lib/libedit.so.6: invalid file format > > > > # standard install (all default options) > > Starting local daemons:. > > Updating motdawk: 1: Syntax error: "(" unexpected > > . > > Mounting late filesystems:. > > Configuring syscons: keymap blanktime. > > /libexec/ld-elf.so.1: Shared object "<ò " not found, required by "libssh.so.4" > > (repeated three times) > > Starting cron. > > Local package initialization:. > > /libexec/ld-elf.so.1: /lib/libm.so.5: invalid file format > > > > I can login and do a couple of things: > > mkdir /freebsd > > mount host:/freebsd /freebsd > > rm -rf /usr/src > > ln -s /freebsd/freebsd-7.0/src /usr/src > > ln -s /freebsd/ports /usr/ports > > mkdir /usr/ports.workdir > > echo "WRKDIRPREFIX=/usr/ports.workdir" > /etc/make.conf > > > > But then: > > cd /usr/ports/sysutils/screen > > make clean && make install clean > > ... > > ===> Extracting for screen-4.0.3_1 > > /usr/bin/awk: 1: Syntax error: "(" unexpected > > *** Error code 2 > > > > And also: > > cd /usr/src > > make buildworld > > >>> stage 1.1: legacy release compatibility shims > > cd /freebsd/freebsd-7.0/src; > > MAKEOBJDIRPREFIX=/usr/obj/freebsd/freebsd-7.0/src/tmp > > INSTALL="sh /freebsd/freebsd-7.0/src/tools/install.sh" > > PATH=/usr/obj/freebsd/freebsd-7.0/src/tmp/legacy/usr/sbin: > > ... ... -DNO_WARNS legacy > > awk: 1: Syntax error: "(" unexpected > > > > > > Any help would be appreciated. I'm at a loss here. > > Ubuntu-7.10 (amd64, server) works fine on this same box, as > > well as FreeBSD-6.1-RELEASE (amd64). I even followed > > the instructions to upgrade 6.1 to 7.0 only to find that > > after rebooting (this is on the second time as per the instructions) > > http://people.freebsd.org/~rse/upgrade/freebsd-upgrade-6x-7x.txt > > I lose the ability to SSH in, and many of these "syntax > > error word unexpected" appear. I cannot rebuild and > > reinstall world at this point, even though the box boots and > > lets me log in. > > You're not going to want to hear it, but I've seen similar symptoms > with a hardware problems. I know this is a possibility, and I do want to hear about it -- my on-site guarantee is still alive :) I've booted the Dell diagnostics CD and run all diagnostic tests (memory, disk, processors) ... no problem was found. > Two easy things to try: > > 1) is this repeatable? Does it fail the exact same way each time? No. Each time the error is different. 1. On one ocasion, right after booting I got several screens of weird symbols. In the previous email I just copied the things that would make sense to a human being. 2. I have just reinstalled 7.0-amd64 again (standard install, didn't select any combo of anything ... just the defaults, and didn't install any extra package), and this time, after booting the error messages were: [...] Configuring syscons: keymap blanktime. /libexec/ld-elf.so.1: /lib/libcrypto.so.5: Unsupported relocation type 74041104 in non-PLT relocations (message repeated 5 times) Starting cron. Local package initialization:. Starting background file system checks in 60 seconds. This time I was able to login and check libcrypto: MD5 (/lib/libcrypto.so.5) = ee943528c8046145b60359f50f45fbf4 And as suggested by Gavin, I rebooted and checked things again. Upon reboot, the error was now different (relocation type changed), and the checksum for libcrypto.so.5 changed! MD5 (/lib/libcrypto.so.5) = a24993818d2b888df053428b48a18eac Maybe it's a problem with the disk driver in FreeBSD-7 for this chipset? (dmesg attached) ... it seems like reading and writing to disk is the problem ... but this only happens with FreeBSD-7.0. Any suggestion as to how I can further debug this? 3. I reinstalled the system once again, and now, after booting into the installed system: init: getty repeating too quickly on port /dev/ttyv6, sleeping 30 secs init: getty repeating too quickly on port /dev/ttyv6, sleeping 30 secs init: getty repeating too quickly on port /dev/ttyv6, sleeping 30 secs ... > 2) Have you tried FreeBSD-7.0-RELEASE on x86? Just another data point. I don't have a spare i386 box available for testing 7.0 right now ... I don't think it's possible to install 7.0-i386 on this box, or is it? > There are two possible hardware issues: one is that some component is > marginal, and the previous release of FreeBSD and your Ubuntu test > don't stress the component in question enough to cause it to fail. the > first test will tell you whether or not this is the case: if it fails > the exact same way each time, then this isn't a part showing > intermittent failures. If the failures move around, try stress-testing > the machine. In which way do you suggest stress testing? When I installed FreeBSD-6.1-amd64 on this box, I compiled all world and kernel without an issue. Do you suggest doing something else? Thanks for all the help thus far. Fernan > The previous time I saw such failures in a repeatable way, the problem > was that the new version of BSD had changed an internal API, and was > now passing more registers to internal functions than previously. The > hardware was flipping a bit in one of those registers. The previous > release of the OS (and the hardware vendors OS) never passed that many > registers, so the problem didn't arise. > > If your problem is repeatable, you need to fire up the debugger on the > kernel, and watch carefully at the first point of failure. This will > also provide useful information for fixing the problem if it's > software and not hardware. > > <mike > -- > Mike Meyer <mwm@mired.org> http://www.mired.org/consulting.html > Independent Network/Unix/Perforce consultant, email for more information. --ibTvN161/egqYuK8 Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.iota.out" Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-RELEASE #0: Sun Feb 24 10:35:36 UTC 2008 root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Dual-Core AMD Opteron(tm) Processor 2210 (1800.08-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x40f13 Stepping = 3 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x2001<SSE3,CX16> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8> Cores per package: 2 usable memory = 8571883520 (8174 MB) avail memory = 8292429824 (7908 MB) ACPI APIC Table: <DELL PE_SC3 > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 ioapic0: Changing APIC ID to 4 ioapic1: Changing APIC ID to 5 ioapic2: Changing APIC ID to 6 MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 1.1> irqs 0-15 on motherboard ioapic1 <Version 1.1> irqs 32-47 on motherboard ioapic2 <Version 1.1> irqs 64-79 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 10:34:18) acpi0: <DELL PE_SC3> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 cpu0: <ACPI CPU> on acpi0 powernow0: <PowerNow! K8> on cpu0 device_attach: powernow0 attach returned 6 cpu1: <ACPI CPU> on acpi0 powernow1: <PowerNow! K8> on cpu1 device_attach: powernow1 attach returned 6 cpu2: <ACPI CPU> on acpi0 powernow2: <PowerNow! K8> on cpu2 device_attach: powernow2 attach returned 6 cpu3: <ACPI CPU> on acpi0 powernow3: <PowerNow! K8> on cpu3 device_attach: powernow3 attach returned 6 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci3: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 13.0 on pci3 pci4: <ACPI PCI bus> on pcib2 atapci0: <ServerWorks HT1000 SATA150 controller> port 0xecb0-0xecb7,0xeca0-0xeca3,0xecb8-0xecbf,0xeca4-0xeca7,0xece0-0xecef mem 0xefdfe000-0xefdfffff irq 6 at device 14.0 on pci3 atapci0: [ITHREAD] ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: [ITHREAD] atapci1: <ServerWorks HT1000 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8c0-0x8cf at device 2.1 on pci0 ata0: <ATA channel 0> on atapci1 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci1 ata1: [ITHREAD] isab0: <PCI-ISA bridge> at device 2.2 on pci0 isa0: <ISA bus> on isab0 ohci0: <OHCI (generic) USB controller> port 0xd000-0xd0ff mem 0xefbed000-0xefbedfff irq 11 at device 3.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <(0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered ohci1: <OHCI (generic) USB controller> port 0xd400-0xd4ff mem 0xefbee000-0xefbeefff irq 11 at device 3.1 on pci0 ohci1: [GIANT-LOCKED] ohci1: [ITHREAD] usb1: OHCI version 1.0, legacy support usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: <(0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> port 0xd800-0xd8ff mem 0xefbef000-0xefbeffff irq 11 at device 3.2 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb2: EHCI version 1.0 usb2: companion controllers, 2 ports each: usb0 usb1 usb2: <EHCI (generic) USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: <(0x1166) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2 uhub2: 4 ports with 4 removable, self powered uhub3: <vendor 0x413c product 0xa001, class 9/0, rev 2.00/0.00, addr 2> on uhub2 uhub3: multiple transaction translators uhub3: 2 ports with 2 removable, self powered ums0: <Logitech Optical USB Mouse, class 0/0, rev 2.00/3.40, addr 3> on uhub3 ums0: 3 buttons and Z dir. ukbd0: <Dell Dell USB Keyboard, class 0/0, rev 1.10/3.01, addr 4> on uhub3 kbd2 at ukbd0 vgapci0: <VGA-compatible display> port 0xdc00-0xdcff mem 0xe0000000-0xe7ffffff,0xefbf0000-0xefbfffff irq 44 at device 4.0 on pci0 pcib3: <ACPI PCI-PCI bridge> irq 32 at device 7.0 on pci0 pci5: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> irq 33 at device 8.0 on pci0 pci1: <ACPI PCI bus> on pcib4 bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x4201> mem 0xefef0000-0xefefffff irq 33 at device 0.0 on pci1 miibus0: <MII bus> on bge0 brgphy0: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: Ethernet address: 00:1a:a0:1e:3c:3b bge0: [ITHREAD] pcib5: <ACPI PCI-PCI bridge> irq 37 at device 9.0 on pci0 pci2: <ACPI PCI bus> on pcib5 bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x4201> mem 0xefff0000-0xefffffff irq 37 at device 0.0 on pci2 miibus1: <MII bus> on bge1 brgphy1: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge1: Ethernet address: 00:1a:a0:1e:3c:3c bge1: [ITHREAD] pcib6: <ACPI PCI-PCI bridge> irq 35 at device 10.0 on pci0 pci6: <ACPI PCI bus> on pcib6 pcib7: <ACPI PCI-PCI bridge> irq 36 at device 11.0 on pci0 pci7: <ACPI PCI bus> on pcib7 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A sio1: [FILTER] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xc9000-0xc9fff,0xec000-0xeffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] ppc0: cannot reserve I/O port range sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec hptrr: no controller detected. md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xffffffff80bc6c08 acd0: CDRW <TSSTcorpCD-RW/DVD-ROM TSL462D/DE04> at ata0-master UDMA33 ad4: DMA limited to UDMA33, device found non-ATA66 cable ad4: 152587MB <WDC WD1600JS-75NCB3 10.02E04> at ata2-master UDMA33 SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! GEOM_LABEL: Label for provider acd0 is iso9660/FreeBSD_Install. GEOM_LABEL: Label for provider ad4s1 is msdosfs/DellUtility. Trying to mount root from ufs:/dev/md0 GEOM_LABEL: Label msdosfs/DellUtility removed. Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...1 0 0 done All buffers synced. Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-RELEASE #0: Sun Feb 24 10:35:36 UTC 2008 root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Dual-Core AMD Opteron(tm) Processor 2210 (1800.08-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x40f13 Stepping = 3 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x2001<SSE3,CX16> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8> Cores per package: 2 usable memory = 8576077824 (8178 MB) avail memory = 8296632320 (7912 MB) ACPI APIC Table: <DELL PE_SC3 > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 ioapic0: Changing APIC ID to 4 ioapic1: Changing APIC ID to 5 ioapic2: Changing APIC ID to 6 MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 1.1> irqs 0-15 on motherboard ioapic1 <Version 1.1> irqs 32-47 on motherboard ioapic2 <Version 1.1> irqs 64-79 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 10:34:18) acpi0: <DELL PE_SC3> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 cpu0: <ACPI CPU> on acpi0 powernow0: <PowerNow! K8> on cpu0 device_attach: powernow0 attach returned 6 cpu1: <ACPI CPU> on acpi0 powernow1: <PowerNow! K8> on cpu1 device_attach: powernow1 attach returned 6 cpu2: <ACPI CPU> on acpi0 powernow2: <PowerNow! K8> on cpu2 device_attach: powernow2 attach returned 6 cpu3: <ACPI CPU> on acpi0 powernow3: <PowerNow! K8> on cpu3 device_attach: powernow3 attach returned 6 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci3: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 13.0 on pci3 pci4: <ACPI PCI bus> on pcib2 atapci0: <ServerWorks HT1000 SATA150 controller> port 0xecb0-0xecb7,0xeca0-0xeca3,0xecb8-0xecbf,0xeca4-0xeca7,0xece0-0xecef mem 0xefdfe000-0xefdfffff irq 6 at device 14.0 on pci3 atapci0: [ITHREAD] ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: [ITHREAD] atapci1: <ServerWorks HT1000 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8c0-0x8cf at device 2.1 on pci0 ata0: <ATA channel 0> on atapci1 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci1 ata1: [ITHREAD] isab0: <PCI-ISA bridge> at device 2.2 on pci0 isa0: <ISA bus> on isab0 ohci0: <OHCI (generic) USB controller> port 0xd000-0xd0ff mem 0xefbed000-0xefbedfff irq 11 at device 3.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <(0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered ohci1: <OHCI (generic) USB controller> port 0xd400-0xd4ff mem 0xefbee000-0xefbeefff irq 11 at device 3.1 on pci0 ohci1: [GIANT-LOCKED] ohci1: [ITHREAD] usb1: OHCI version 1.0, legacy support usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: <(0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> port 0xd800-0xd8ff mem 0xefbef000-0xefbeffff irq 11 at device 3.2 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb2: EHCI version 1.0 usb2: companion controllers, 2 ports each: usb0 usb1 usb2: <EHCI (generic) USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: <(0x1166) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2 uhub2: 4 ports with 4 removable, self powered uhub3: <vendor 0x413c product 0xa001, class 9/0, rev 2.00/0.00, addr 2> on uhub2 uhub3: multiple transaction translators uhub3: 2 ports with 2 removable, self powered ums0: <Logitech Optical USB Mouse, class 0/0, rev 2.00/3.40, addr 3> on uhub3 ums0: 3 buttons and Z dir. ukbd0: <Dell Dell USB Keyboard, class 0/0, rev 1.10/3.01, addr 4> on uhub3 kbd2 at ukbd0 vgapci0: <VGA-compatible display> port 0xdc00-0xdcff mem 0xe0000000-0xe7ffffff,0xefbf0000-0xefbfffff irq 44 at device 4.0 on pci0 pcib3: <ACPI PCI-PCI bridge> irq 32 at device 7.0 on pci0 pci5: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> irq 33 at device 8.0 on pci0 pci1: <ACPI PCI bus> on pcib4 bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x4201> mem 0xefef0000-0xefefffff irq 33 at device 0.0 on pci1 miibus0: <MII bus> on bge0 brgphy0: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: Ethernet address: 00:1a:a0:1e:3c:3b bge0: [ITHREAD] pcib5: <ACPI PCI-PCI bridge> irq 37 at device 9.0 on pci0 pci2: <ACPI PCI bus> on pcib5 bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x4201> mem 0xefff0000-0xefffffff irq 37 at device 0.0 on pci2 miibus1: <MII bus> on bge1 brgphy1: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge1: Ethernet address: 00:1a:a0:1e:3c:3c bge1: [ITHREAD] pcib6: <ACPI PCI-PCI bridge> irq 35 at device 10.0 on pci0 pci6: <ACPI PCI bus> on pcib6 pcib7: <ACPI PCI-PCI bridge> irq 36 at device 11.0 on pci0 pci7: <ACPI PCI bus> on pcib7 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A sio1: [FILTER] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xc9000-0xc9fff,0xec000-0xeffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] ppc0: cannot reserve I/O port range sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec hptrr: no controller detected. acd0: CDRW <TSSTcorpCD-RW/DVD-ROM TSL462D/DE04> at ata0-master UDMA33 ad4: DMA limited to UDMA33, device found non-ATA66 cable ad4: 152587MB <WDC WD1600JS-75NCB3 10.02E04> at ata2-master UDMA33 SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! Trying to mount root from ufs:/dev/ad4s1a exec /sbin/init: error 8 bge0: link state changed to UP --ibTvN161/egqYuK8--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200804221910.m3MJA3Yw064382>