Date: Tue, 20 Jun 2000 13:51:04 +0200 From: "Jose" <jose@fibre.a2000.nl> To: <freebsd-questions@FreeBSD.org> Subject: Can't detect second NIC Message-ID: <000801bfdaad$d0815f00$5e188418@a2000.nl>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. ------=_NextPart_000_0004_01BFDABE.93B642A0 Content-Type: multipart/alternative; boundary="----=_NextPart_001_0005_01BFDABE.93BF6A60" ------=_NextPart_001_0005_01BFDABE.93BF6A60 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi I have a problem, I'm using freebsd 4.0, and I have two NIC's in my = system. A 3com 905b TX, through this card I get on the internet, I get an ip via = DHCP for my cable modem. (This one works perfectly) I also have a NE2000 isa card, it's a REALTEK 8019 that's on irq =3D 11, = port 240. It's in PnP mode. FreeBSD can't detect my realtek, I even tried to put my card in = jumperless, on irq 3 port 300. But It doesn't get detected.=20 This card works perfectly under win98/NT server, and linux. But I can't = get it working under FreeBSD. Can anyone please help me, the manual really doesn't say very much = about, more NIC's in the same system, and how to configure both cards. I = normally check with dmesg if ed0 is available, and see if I can select = it from /stand/sysinstall in networking. Do I have to change something = in my rc.conf?? Please tell me the steps how I can get this working. I have included my kernel configuration and a copy of dmesg as an = attachment. I always get this when I'm booting, is this a configuration error? And = if so, how can I solve it??? config> di sn0 No such device: sn0 Invalid command or syntax. Type `?' for help. config> di lnc0 No such device: lnc0 Invalid command or syntax. Type `?' for help. config> di le0 No such device: le0 Invalid command or syntax. Type `?' for help. config> di ie0 No such device: ie0 Invalid command or syntax. Type `?' for help. config> di fe0 No such device: fe0 Invalid command or syntax. Type `?' for help. config> di ed0 config> di cs0 No such device: cs0 Invalid command or syntax. Type `?' for help. config> di bt0 No such device: bt0 Invalid command or syntax. Type `?' for help. config> di aic0 No such device: aic0 Invalid command or syntax. Type `?' for help. config> di aha0 No such device: aha0 Invalid command or syntax. Type `?' for help. config> di adv0 No such device: adv0 Invalid command or syntax. Type `?' for help. config> q I would like to thank you all in advance, and I hope you can help me. Jose Vazquez ------=_NextPart_001_0005_01BFDABE.93BF6A60 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META content=3D"text/html; charset=3Diso-8859-1" = http-equiv=3DContent-Type> <META content=3D"MSHTML 5.00.3018.900" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=3D#ffffff> <DIV><FONT face=3DArial size=3D2>Hi I have a problem, I'm using freebsd = 4.0, and I=20 have two NIC's in my system.</FONT></DIV> <DIV><FONT face=3DArial size=3D2>A 3com 905b TX, through this card I get = on the=20 internet, I get an ip via DHCP for my cable modem. (This one works=20 perfectly)</FONT></DIV> <DIV> </DIV> <DIV><FONT face=3DArial size=3D2>I also have a NE2000 isa card, it's a = REALTEK 8019=20 that's on irq =3D 11, port 240. It's in PnP mode.</FONT></DIV> <DIV><FONT face=3DArial size=3D2>FreeBSD can't detect my realtek, I even = tried to=20 put my card in jumperless, on irq 3 port 300. But It doesn't get = detected.=20 </FONT></DIV> <DIV><FONT face=3DArial size=3D2>This card works perfectly under = win98/NT server,=20 and linux. But I can't get it working under FreeBSD.</FONT></DIV> <DIV> </DIV> <DIV><FONT face=3DArial size=3D2>Can anyone please help me, the manual = really=20 doesn't say very much about, more NIC's in the same system, and how to = configure=20 both cards. I normally check with dmesg if ed0 is available, and see if = I can=20 select it from /stand/sysinstall in networking. Do I have to change = something in=20 my rc.conf?? Please tell me the steps how I can get this = working.</FONT></DIV> <DIV> </DIV> <DIV><FONT face=3DArial size=3D2>I have included my kernel = configuration and a=20 copy of dmesg as an attachment.</FONT></DIV> <DIV> </DIV> <DIV><FONT face=3DArial size=3D2>I always get this when I'm booting, is = this a=20 configuration error? And if so, how can I solve it???</FONT></DIV> <DIV><FONT face=3DArial size=3D2>config> di sn0<BR>No such device: = sn0<BR>Invalid=20 command or syntax. Type `?' for help.<BR>config> di lnc0<BR>No = such=20 device: lnc0<BR>Invalid command or syntax. Type `?' for=20 help.<BR>config> di le0<BR>No such device: le0<BR>Invalid command or=20 syntax. Type `?' for help.<BR>config> di ie0<BR>No such device: = ie0<BR>Invalid command or syntax. Type `?' for help.<BR>config> = di=20 fe0<BR>No such device: fe0<BR>Invalid command or syntax. Type `?' = for=20 help.<BR>config> di ed0<BR>config> di cs0<BR>No such device:=20 cs0<BR>Invalid command or syntax. Type `?' for help.<BR>config> = di=20 bt0<BR>No such device: bt0<BR>Invalid command or syntax. Type `?' = for=20 help.<BR>config> di aic0<BR>No such device: aic0<BR>Invalid command = or=20 syntax. Type `?' for help.<BR>config> di aha0<BR>No such = device:=20 aha0<BR>Invalid command or syntax. Type `?' for = help.<BR>config> di=20 adv0<BR>No such device: adv0<BR>Invalid command or syntax. Type = `?' for=20 help.<BR>config> q</FONT></DIV> <DIV> </DIV> <DIV><FONT face=3DArial size=3D2>I would like to thank you all in = advance, and I=20 hope you can help me.</FONT></DIV> <DIV> </DIV> <DIV><FONT face=3DArial size=3D2>Jose Vazquez</FONT></DIV> <DIV> </DIV> <DIV> </DIV></BODY></HTML> ------=_NextPart_001_0005_01BFDABE.93BF6A60-- ------=_NextPart_000_0004_01BFDABE.93B642A0 Content-Type: application/octet-stream; name="MYKERNEL40" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="MYKERNEL40" # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.freebsd.org/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.ORG/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ./LINT configuration file. If you = are # in doubt as to the purpose or necessity of a line, check first in = LINT. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246 2000/03/09 16:32:55 jlemon = Exp $ machine i386 #cpu I386_CPU #cpu I486_CPU cpu I586_CPU #cpu I686_CPU ident MYKERNEL40 maxusers 32 #makeoptions DEBUG=3D-g #Build kernel with gdb(1) debug symbols options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, NFS required options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=3D15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extentions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options USER_LDT options EXT2FS # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): #options NCPU=3D2 # number of CPUs #options NBUS=3D4 # number of busses #options NAPIC=3D1 # number of IO APICs #options NINTR=3D24 # number of INTs device isa device eisa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 device fd1 at fdc0 drive 1 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives #device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering #options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices # SCSI Controllers #device ahb # EISA AHA1742 family #device ahc # AHA2940 and onboard AIC7xxx devices #device amd # AMD 53C974 (Teckram DC-390(T)) #device dpt # DPT Smartcache - See LINT for options! #device isp # Qlogic family #device ncr # NCR/Symbios Logic #device sym # NCR/Symbios Logic (newer chipsets) #device adv0 at isa? #device adw #device bt0 at isa? #device aha0 at isa? #device aic0 at isa? # SCSI peripherals device scbus # SCSI bus (required) #device da # Direct Access (disks) #device sa # Sequential Access (tape etc) #device cd # CD #device pass # Passthrough device (direct SCSI access) # RAID controllers #device ida # Compaq Smart RAID #device amr # AMI MegaRAID #device mlx # Mylex DAC960 family # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT = lines #options PCVT_SCANSET=3D2 # IBM keyboards are non-std # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) device apm0 at nexus? disable flags 0x20 # Advanced Power Management # PCCARD (PCMCIA) support #device card #device pcic0 at isa? irq 10 port 0x3e0 iomem 0xd0000 #device pcic1 at isa? irq 11 port 0x3e2 iomem 0xd4000 disable # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 device sio2 at isa? disable port IO_COM3 irq 5 device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs. #device de # DEC/Intel DC21x4x (``Tulip'') #device fxp # Intel EtherExpress PRO/100B (82557, 82558) #device tx # SMC 9432TX (83c170 ``EPIC'') #device vx # 3Com 3c590, 3c595 (``Vortex'') #device wx # Intel Gigabit Ethernet Card (``Wiseman'') # PCI Ethernet NICs that use the common MII bus controller code. device miibus # MII bus support #device dc # DEC/Intel 21143 and various workalikes #device rl # RealTek 8129/8139 #device sf # Adaptec AIC-6915 (``Starfire'') #device sis # Silicon Integrated Systems SiS 900/SiS 7016 #device ste # Sundance ST201 (D-Link DFE-550TX) #device tl # Texas Instruments ThunderLAN #device vr # VIA Rhine, Rhine II #device wb # Winbond W89C840F device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. device ed0 at isa? port 0x240 irq 11 #device ex #device ep # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really # exists only as a PCMCIA device, so there is no ISA attatement needed # and resources will always be dynamically assigned by the pccard code. device wi # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below = will # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP # mode (the factory default). If you set the switches on your ISA # card for a manually chosen I/O address and IRQ, you must specify # those paremeters here. device an # The probe order of these is presently determined by = i386/isa/isa_compat.c. #device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 #device fe0 at isa? port 0x300 #device le0 at isa? port 0x300 irq 5 iomem 0xd0000 #device lnc0 at isa? port 0x280 irq 10 drq 0 #device cs0 at isa? port 0x300 #device sn0 at isa? port 0x300 irq 10 # requires PCCARD (PCMCIA) support to be activated #device xe0 at isa? # Pseudo devices - the number indicates how many units to allocated. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP #pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" pseudo-device gif 4 # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter # USB support #device uhci # UHCI PCI->USB interface #device ohci # OHCI PCI->USB interface #device usb # USB Bus (required) #device ugen # Generic #device uhid # "Human Interface Devices" #device ukbd # Keyboard #device ulpt # Printer #device umass # Disks/Mass storage - Requires scbus and da #device ums # Mouse # USB Ethernet, requires mii #device aue # ADMtek USB ethernet #device cue # CATC USB ethernet #device kue # Kawasaki LSI USB ethernet # options VESA #device pcm #device sbc0 at isa? port 0x220 irq 5 drq 1 flags 0x15 #device sbxvi0 at isa? drq 5 #device sbmidi0 at isa? port 0x330 #device awe0 at isa? port 0x620 #device opl0 at isa? port 0x388 #device mpu0 at isa? port 0x330 irq 6 drq 0 #device joy0 at isa? port IO_GAME ------=_NextPart_000_0004_01BFDABE.93B642A0 Content-Type: text/plain; name="startup-dmesg.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="startup-dmesg.txt" Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-RELEASE #4: Tue Jun 20 12:52:52 CEST 2000 root@node1185e.a2000.nl:/usr/src/sys/compile/MYKERNEL40 Timecounter "i8254" frequency 1193182 Hz CPU: AMD-K6tm w/ multimedia extensions (233.86-MHz 586-class CPU) Origin =3D "AuthenticAMD" Id =3D 0x562 Stepping =3D 2 Features=3D0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX> AMD Features=3D0x400<<b10>> real memory =3D 67108864 (65536K bytes) config> di sn0 No such device: sn0 Invalid command or syntax. Type `?' for help. config> di lnc0 No such device: lnc0 Invalid command or syntax. Type `?' for help. config> di le0 No such device: le0 Invalid command or syntax. Type `?' for help. config> di ie0 No such device: ie0 Invalid command or syntax. Type `?' for help. config> di fe0 No such device: fe0 Invalid command or syntax. Type `?' for help. config> di ed0 config> di cs0 No such device: cs0 Invalid command or syntax. Type `?' for help. config> di bt0 No such device: bt0 Invalid command or syntax. Type `?' for help. config> di aic0 No such device: aic0 Invalid command or syntax. Type `?' for help. config> di aha0 No such device: aha0 Invalid command or syntax. Type `?' for help. config> di adv0 No such device: adv0 Invalid command or syntax. Type `?' for help. config> q avail memory =3D 61874176 (60424K bytes) Preloaded elf kernel "kernel" at 0xc0312000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc031209c. VESA: v2.0, 2048k memory, flags:0x1, mode table:0xc02bada2 (1000022) VESA: Matrox Graphics Inc. md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 isab0: <Intel 82371AB PCI to ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xe000-0xe00f at device 1.1 = on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 1.2 irq 9 chip1: <Intel 82371AB Power management controller> port 0xe800-0xe80f at = device 1.3 on pci0 pci0: <3Dfx Voodoo graphics accelerator> at 10.0 pci0: <Matrox MGA Millennium 2064W graphics accelerator> at 11.0 irq 9 xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xd400-0xd47f mem = 0xe5000000-0xe500007f irq 10 at device 12.0 on pci0 xl0: Ethernet address: 00:50:04:6b:79:47 miibus0: <MII bus> on xl0 xlphy0: <3Com internal media interface> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: supplying EUI64: 00:50:04:ff:fe:6b:79:47 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on = isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model MouseMan+, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on = isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=3D0x200> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppi0: <Parallel I/O> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port plip0: <PLIP network interface> on ppbus0 unknown0: <Audio> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq = 1,5 on isa0 unknown1: <Game> at port 0x200-0x207 on isa0 unknown2: <WaveTable> at port 0x620-0x623 on isa0 ad0: 10300MB <Maxtor 91080D5> [20928/16/63] at ata0-master using UDMA33 ad1: 3020MB <WDC AC33100H> [6136/16/63] at ata0-slave using WDMA2 acd0: CDROM <CD-ROM 40X/AKU> at ata1-master using PIO4 acd1: CD-R <WPI CDR-622 ATAPI IDE CD-R> at ata1-slave using PIO3 Mounting root from ufs:/dev/ad0s2a xl0: starting DAD for fe80:0001::0250:04ff:fe6b:7947 xl0: DAD complete for fe80:0001::0250:04ff:fe6b:7947 - no duplicates = found ------=_NextPart_000_0004_01BFDABE.93B642A0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000801bfdaad$d0815f00$5e188418>