Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 23 May 2010 21:00:14 -0400
From:      Tom Uffner <tom@uffner.com>
To:        current@freebsd.org
Subject:   Re: Call for Test and Review: bwn(4) - another Broadcom Wireless driver
Message-ID:  <4BF9CF9E.1000205@uffner.com>
In-Reply-To: <20100510195622.GA1295@weongyo>
References:  <20100228095259.GB3536@weongyo>	<20100301103240.3a4aac8a.ray@dlink.ua>	<20100303082833.GB22865@weongyo>	<20100303111014.6564ea1e.ray@dlink.ua>	<20100312231333.GZ1295@weongyo> <4BD2201E.3090409@entel.upc.edu>	<20100424231755.GI65380@weongyo> <4BD4A928.8020901@entel.upc.edu>	<20100506190653.GA31100@weongyo>	<58220.88.15.97.205.1273248485.squirrel@webmail.entel.upc.edu> <20100510195622.GA1295@weongyo>

next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------050401010107000407030506
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit

Weongyo Jeong wrote:

> OK.  The patch is ready to test.  Could you please test it with attached
> patch?

your patch got rid of the "bwn0: unsupported rate 0" messages on my Dell
Inspiron 1150. But it still gives me repeated:

bwn0: RX decryption attempted (old 0 keyidx 0x1)

and a few of the following:

bwn0: need multicast update callback
ts_to_ct(1274664456.824638117) = [2010-05-24 01:27:36]

please let me know if there is anything you want me to test.


--------------050401010107000407030506
Content-Type: text/plain;
 name="dmesg.boot"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="dmesg.boot"

Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-STABLE #0: Sun May 16 00:05:17 EDT 2010
    tom@zoe.uffner.com:/usr/obj/usr/src/sys/ZOE i386
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0ab6000.
Preloaded elf module "/boot/kernel/if_bwn.ko" at 0xc0ab6174.
Preloaded elf module "/boot/kernel/siba_bwn.ko" at 0xc0ab6220.
Preloaded elf module "/boot/modules/bwn_v4_ucode.ko" at 0xc0ab62d0.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2597803596 Hz
CPU: Intel(R) Celeron(R) CPU 2.60GHz (2597.80-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf29  Family = f  Model = 2  Stepping = 9
  Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x4400<CNXT-ID,xTPR>

Instruction TLB: 4 KB, 2 MB or 4 MB pages, fully associative, 128 entries
Data TLB: 4 KB or 4 MB pages, fully associative, 64 entries
1st-level data cache: 8 KB, 4-way set associative, sectored cache, 64 byte line size
Trace cache: 12K-uops, 8-way set associative
2nd-level cache: 128 KB, 2-way set associative, sectored cache, 64 byte line size
real memory  = 1073741824 (1024 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c26000 - 0x000000003ec82fff, 1040568320 bytes (254045 pages)
avail memory = 1040355328 (992 MB)
bios32: Found BIOS32 Service Directory header at 0xc00ffe80
bios32: Entry = 0xffe90 (c00ffe90)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xcfae
pnpbios: Found PnP BIOS data at 0xc00fe2d0
pnpbios: Entry = f0000:e2f4  Rev = 1.0
pnpbios: Event flag at 4b4
Other BIOS signatures found:
x86bios:   IVT 0x000000-0x0004ff at 0xc0000000
x86bios:  SSEG 0x010000-0x01ffff at 0xc3b74000
x86bios:  EBDA 0x09f000-0x09ffff at 0xc009f000
x86bios:   ROM 0x0a0000-0x0effff at 0xc00a0000
ULE: setup cpu 0
wlan: <802.11 Link Layer>
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
firmware: 'bwn_v4_ucode' version 0: 0 bytes loaded at 0xc0a8b808
firmware: 'bwn_v4_ucode5' version 0: 22384 bytes loaded at 0xc0a8b808
firmware: 'bwn_v4_ucode11' version 0: 29864 bytes loaded at 0xc0a90f78
firmware: 'bwn_v4_ucode13' version 0: 32232 bytes loaded at 0xc0a98420
firmware: 'bwn_v4_ucode14' version 0: 31384 bytes loaded at 0xc0aa0208
firmware: 'bwn_v4_ucode15' version 0: 30488 bytes loaded at 0xc0aa7ca0
firmware: 'bwn_v4_pcm5' version 0: 1320 bytes loaded at 0xc0aaf3b8
firmware: 'bwn_v4_a0g1initvals5' version 0: 1840 bytes loaded at 0xc0aaf8e0
firmware: 'bwn_v4_a0g0initvals5' version 0: 1840 bytes loaded at 0xc0ab0010
firmware: 'bwn_v4_b0g0initvals5' version 0: 1840 bytes loaded at 0xc0ab0740
firmware: 'bwn_v4_b0g0initvals13' version 0: 2080 bytes loaded at 0xc0ab0e70
firmware: 'bwn_v4_a0g1bsinitvals5' version 0: 158 bytes loaded at 0xc0ab1690
firmware: 'bwn_v4_a0g0bsinitvals5' version 0: 158 bytes loaded at 0xc0ab172e
firmware: 'bwn_v4_b0g0bsinitvals5' version 0: 158 bytes loaded at 0xc0ab17cc
firmware: 'bwn_v4_lp0initvals13' version 0: 3618 bytes loaded at 0xc0ab186a
firmware: 'bwn_v4_lp0initvals14' version 0: 2064 bytes loaded at 0xc0ab268c
firmware: 'bwn_v4_lp0initvals15' version 0: 2052 bytes loaded at 0xc0ab2e9c
firmware: 'bwn_v4_lp0bsinitvals13' version 0: 158 bytes loaded at 0xc0ab36a0
firmware: 'bwn_v4_lp0bsinitvals14' version 0: 158 bytes loaded at 0xc0ab373e
firmware: 'bwn_v4_lp0bsinitvals15' version 0: 158 bytes loaded at 0xc0ab37dc
firmware: 'bwn_v4_n0bsinitvals11' version 0: 158 bytes loaded at 0xc0ab387a
kbd: new array size 4
kbd1 at kbdmux0
nfslock: pseudo-device
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
io: <I/O>
random: <entropy source, Software, Yarrow>
ACPI: RSDP 0xfdf00 00014 (v0 DELL  )
ACPI: RSDT 0x3fef0000 00028 (v1 DELL    CPi R   27D50605 ASL  00000061)
ACPI: FACP 0x3fef0400 00074 (v1 DELL    CPi R   27D50605 ASL  00000061)
ACPI: DSDT 0x3fef0c00 02594 (v1 INT430 SYSFexxx 00001001 MSFT 0100000E)
ACPI: FACS 0x3feff800 00040
npx0: INT 16 interface
acpi0: <DELL CPi R  > on motherboard
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: wakeup code va 0xc3b73000 pa 0x1000
atpic: Programming IRQ9 as level/low
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80000050
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=80] is there (id=35808086)
pcibios: BIOS version 2.10
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.ISAB.PIR1 -> bus 0 dev 31 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.ISAB.PIR2 -> bus 0 dev 31 func 0
acpi0: reservation of 0, 9fc00 (3) failed
acpi0: reservation of 100000, 3fdf0000 (3) failed
ACPI timer: 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  9 10 11
  Validation          0   11   N     0  9 10 11
  After Disable       0  255   N     0  9 10 11
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  5 7
  Validation          0  255   N     0  5 7
  After Disable       0  255   N     0  5 7
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  9 10 11
  Validation          0   11   N     0  9 10 11
  After Disable       0  255   N     0  9 10 11
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  5 7 9 10 11
  Validation          0   11   N     0  5 7 9 10 11
  After Disable       0  255   N     0  5 7 9 10 11
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 6 7 9 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 14 15
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 6 7 9 10 11 12 14 15
  Validation          0   11   N     0  3 4 5 6 7 9 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 14 15
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI: Found matching pin for 0.31.INTA at func 1: 255
ACPI: Found matching pin for 0.31.INTB at func 5: 11
pci_link1: BIOS IRQ 11 for 0.31.INTB is invalid
ACPI: Found matching pin for 0.29.INTA at func 0: 11
ACPI: Found matching pin for 0.29.INTB at func 1: 11
ACPI: Found matching pin for 0.29.INTC at func 2: 11
ACPI: Found matching pin for 0.29.INTD at func 7: 11
ACPI: Found matching pin for 0.2.INTA at func 0: 11
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x8086, dev=0x3580, revid=0x02
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0106, statreg=0x3090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3584, revid=0x02
	domain=0, bus=0, slot=0, func=1
	class=08-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0080, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3585, revid=0x02
	domain=0, bus=0, slot=0, func=3
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0080, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3582, revid=0x02
	domain=0, bus=0, slot=2, func=0
	class=03-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 1  supports D0 D1 D3  current D0
	map[10]: type Prefetchable Memory, range 32, base 0xe8000000, size 27, enabled
	map[14]: type Memory, range 32, base 0xf6f80000, size 19, enabled
	map[18]: type I/O Port, range 32, base 0xc000, size  3, enabled
pcib0: matched entry for 0.2.INTA (src \\_SB_.PCI0.LNKA:0)
pcib0: slot 2 INTA routed to irq 11 via \\_SB_.PCI0.LNKA
found->	vendor=0x8086, dev=0x3582, revid=0x02
	domain=0, bus=0, slot=2, func=1
	class=03-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 1  supports D0 D1 D3  current D0
	map[10]: type Prefetchable Memory, range 32, base 0xe0000000, size 27, enabled
	map[14]: type Memory, range 32, base 0xf6f00000, size 19, enabled
found->	vendor=0x8086, dev=0x24c2, revid=0x01
	domain=0, bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	map[20]: type I/O Port, range 32, base 0xbf80, size  5, enabled
pcib0: matched entry for 0.29.INTA (src \\_SB_.PCI0.LNKA:0)
pcib0: slot 29 INTA routed to irq 11 via \\_SB_.PCI0.LNKA
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf80
found->	vendor=0x8086, dev=0x24c4, revid=0x01
	domain=0, bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	map[20]: type I/O Port, range 32, base 0xbf40, size  5, enabled
pcib0: matched entry for 0.29.INTB (src \\_SB_.PCI0.LNKD:0)
pcib0: slot 29 INTB routed to irq 11 via \\_SB_.PCI0.LNKD
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf40
found->	vendor=0x8086, dev=0x24c7, revid=0x01
	domain=0, bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=11
	map[20]: type I/O Port, range 32, base 0xbf20, size  5, enabled
pcib0: matched entry for 0.29.INTC (src \\_SB_.PCI0.LNKC:0)
pcib0: slot 29 INTC routed to irq 11 via \\_SB_.PCI0.LNKC
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf20
found->	vendor=0x8086, dev=0x24cd, revid=0x01
	domain=0, bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xf6effc00, size 10, enabled
pcib0: matched entry for 0.29.INTD (src \\_SB_.PCI0.LNKH:0)
pcib0: slot 29 INTD routed to irq 11 via \\_SB_.PCI0.LNKH
unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf6effc00
found->	vendor=0x8086, dev=0x2448, revid=0x81
	domain=0, bus=0, slot=30, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x8880, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x24cc, revid=0x01
	domain=0, bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x24ca, revid=0x01
	domain=0, bus=0, slot=31, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	map[20]: type I/O Port, range 32, base 0xbfa0, size  4, enabled
	map[24]: type Memory, range 32, base 0, size 10, memory disabled
found->	vendor=0x8086, dev=0x24c5, revid=0x01
	domain=0, bus=0, slot=31, func=5
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type I/O Port, range 32, base 0xc800, size  8, enabled
	map[14]: type I/O Port, range 32, base 0xcc40, size  6, enabled
	map[18]: type Memory, range 32, base 0xf6eff800, size  9, enabled
	map[1c]: type Memory, range 32, base 0xf6eff400, size  8, enabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LNKB:0)
pci_link1: Picked IRQ 9 with weight 0
pcib0: slot 31 INTB routed to irq 9 via \\_SB_.PCI0.LNKB
found->	vendor=0x8086, dev=0x24c6, revid=0x01
	domain=0, bus=0, slot=31, func=6
	class=07-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type I/O Port, range 32, base 0xc400, size  8, enabled
	map[14]: type I/O Port, range 32, base 0xc080, size  7, enabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LNKB:0)
pcib0: slot 31 INTB routed to irq 9 via \\_SB_.PCI0.LNKB
pci0: <base peripheral> at device 0.1 (no driver attached)
pci0: <base peripheral> at device 0.3 (no driver attached)
vgapci0: <VGA-compatible display> port 0xc000-0xc007 mem 0xe8000000-0xefffffff,0xf6f80000-0xf6ffffff irq 11 at device 2.0 on pci0
agp0: <Intel 8285xM (85xGM GMCH) SVGA controller> on vgapci0
vgapci0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xe8000000
vgapci0: Reserved 0x80000 bytes for rid 0x14 type 3 at 0xf6f80000
agp0: detected 892k stolen memory
agp0: aperture size is 128M
vgapci1: <VGA-compatible display> mem 0xe0000000-0xe7ffffff,0xf6f00000-0xf6f7ffff at device 2.1 on pci0
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xbf80-0xbf9f irq 11 at device 29.0 on pci0
uhci0: [MPSAFE]
uhci0: [ITHREAD]
usbus0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xbf40-0xbf5f irq 11 at device 29.1 on pci0
uhci1: [MPSAFE]
uhci1: [ITHREAD]
usbus1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xbf20-0xbf3f irq 11 at device 29.2 on pci0
uhci2: [MPSAFE]
uhci2: [ITHREAD]
usbus2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xf6effc00-0xf6efffff irq 11 at device 29.7 on pci0
ehci0: [MPSAFE]
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     2
pcib1:   subordinate bus   2
pcib1:   I/O decode        0xd000-0xefff
pcib1:   memory decode     0xf8000000-0xfdffffff
pcib1:   no prefetched decode
pcib1:   Subtractively decoded bridge.
ACPI: Found matching pin for 2.4.INTA at func 0: 255
ACPI: Found matching pin for 2.2.INTA at func 0: 11
ACPI: Found matching pin for 2.1.INTA at func 0: 11
pci_link1: BIOS IRQ 11 for 2.1.INTA is invalid
pci2: <ACPI PCI bus> on pcib1
pci2: domain=0, physical bus=2
found->	vendor=0x14e4, dev=0x4401, revid=0x01
	domain=0, bus=2, slot=1, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0810, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xfcffe000, size 13, enabled
pcib1: requested memory range 0xfcffe000-0xfcffffff: good
pcib1: matched entry for 2.1.INTA (src \\_SB_.PCI0.LNKB:0)
pcib1: slot 1 INTA routed to irq 9 via \\_SB_.PCI0.LNKB
found->	vendor=0x14e4, dev=0x4320, revid=0x03
	domain=0, bus=2, slot=2, func=0
	class=02-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	map[10]: type Memory, range 32, base 0xfcffc000, size 13, enabled
pcib1: requested memory range 0xfcffc000-0xfcffdfff: good
pcib1: matched entry for 2.2.INTA (src \\_SB_.PCI0.LNKC:0)
pcib1: slot 2 INTA routed to irq 11 via \\_SB_.PCI0.LNKC
found->	vendor=0x104c, dev=0xac56, revid=0x00
	domain=0, bus=2, slot=4, func=0
	class=06-07-00, hdrtype=0x02, mfdev=0
	cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x07 (1750 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0, size 12, memory disabled
bfe0: <Broadcom BCM4401 Fast Ethernet> mem 0xfcffe000-0xfcffffff irq 9 at device 1.0 on pci2
bfe0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xfcffe000
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> PHY 1 on miibus0
bmtphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bfe0: bpf attached
bfe0: Ethernet address: 00:11:43:69:8b:52
bfe0: [MPSAFE]
bfe0: [ITHREAD]
siba_bwn0: <Broadcom BCM4306 802.11b/g Wireless> mem 0xfcffc000-0xfcffdfff irq 11 at device 2.0 on pci2
siba_bwn0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xfcffc000
bwn0 on siba_bwn0
bwn0: WLAN (chipid 0x4306 rev 5) PHY (analog 2 type 2 rev 2) RADIO (manuf 0x17f ver 0x2050 rev 2)
bwn0: DMA (30 bits)
bwn0: [MPSAFE]
bwn0: [FILTER]
bwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
bwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
cbb0: <TI1510 PCI-CardBus Bridge> at device 4.0 on pci2
pcib1: cbb0 requested memory range 0x0-0xffffffff: good
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80000000
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x80000000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib1: matched entry for 2.4.INTA (src \\_SB_.PCI0.LNKA:0)
pcib1: slot 4 INTA routed to irq 11 via \\_SB_.PCI0.LNKA
cbb0: [MPSAFE]
cbb0: [FILTER]
cbb0: PCI Configuration space:
  0x00: 0xac56104c 0x02100007 0x06070000 0x00022008 
  0x10: 0x80000000 0x020000a0 0x20040302 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 
  0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 
  0x40: 0x017f1028 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x08405061 0x00000000 0x00000000 0x00001002 
  0x90: 0x606482c0 0x00000000 0x00000000 0x00000000 
  0xa0: 0xfe120001 0x00c00000 0x00000000 0x0000001f 
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xbfa0-0xbfaf at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xbfa0
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x10000
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata1: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=50 stat1=00 devices=0x1
ata1: [MPSAFE]
ata1: [ITHREAD]
pcm0: <Intel ICH4 (82801DB)> port 0xc800-0xc8ff,0xcc40-0xcc7f mem 0xf6eff800-0xf6eff9ff,0xf6eff400-0xf6eff4ff irq 9 at device 31.5 on pci0
pcm0: Reserved 0x200 bytes for rid 0x18 type 3 at 0xf6eff800
pcm0: Reserved 0x100 bytes for rid 0x1c type 3 at 0xf6eff400
pcm0: [MPSAFE]
pcm0: [ITHREAD]
pcm0: <SigmaTel STAC9750/51 AC97 Codec (id = 0x83847650)>
pcm0: Codec features headphone, 20 bit DAC, 20 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement
pcm0: Primary codec extended features variable rate PCM, AMAP, reserved 4
pcm0: ac97 codec dac ready count: 0
pcm0: Mixer "vol":
pcm0: Mixer "pcm":
pcm0: Mixer "speaker":
pcm0: Mixer "line":
pcm0: Mixer "mic":
pcm0: Mixer "cd":
pcm0: Mixer "rec":
pcm0: Mixer "igain":
pcm0: Mixer "ogain":
pcm0: Mixer "line1":
pcm0: Mixer "phin":
pcm0: Mixer "phout":
pcm0: Mixer "video":
pcm0: clone manager: deadline=750ms flags=0x8000001e
pcm0: sndbuf_setmap 1e1c000, 4000; 0xe43be000 -> 1e1c000
pcm0: sndbuf_setmap 1e20000, 4000; 0xe43c2000 -> 1e20000
pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: current command byte:0065
psm0: <PS/2 Mouse> flags 0x1000 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00001000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
isa_probe_children: disabling PnP devices
pmtimer0 on isa0
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
sc: sc0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcc7ff,0xcc800-0xccfff,0xcd000-0xcd7ff,0xcd800-0xcdfff,0xce000-0xce7ff,0xce800-0xcefff,0xcf000-0xcf7ff,0xcf800-0xcffff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
ppc0 failed to probe at irq 7 on isa0
uart0: <ns8250> failed to probe at port 0x3f8-0x3ff irq 4 on isa0
uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0
isa_probe_children: probing PnP devices
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
device_attach: acpi_perf0 attach returned 6
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
device_attach: acpi_perf0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
ichss0: <SpeedStep ICH> on cpu0
ichss0: enabling SpeedStep support
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 2597803596 Hz quality 800
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
ata0: Identifying devices: 00010000
ata0: New devices: 00010000
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
battery0: battery initialization start
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
battery0: battery initialization done, tried 1 times
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting UDMA33
acd0: <HL-DT-STCD-RW/DVD-ROM GCC-4243N/A102> CDRW drive at ata0 as master
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA33 
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata1: Identifying devices: 00000001
ata1: New devices: 00000001
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad2: setting UDMA100
ad2: 28615MB <TOSHIBA MK3021GAS GA129D> at ata1-master UDMA100 
ad2: 58605120 sectors [58140C/16H/63S] 16 sectors/interrupt 1 depth queue
pcm0: measured ac97 link rate at 48017 Hz, will use 48000 Hz
GEOM: new disk ad2
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
Root mount waiting for: usbus3
Root mount waiting for: usbus3
Root mount waiting for: usbus3
uhub3: 6 ports with 6 removable, self powered
Trying to mount root from ufs:/dev/label/rootfs0
ct_to_ts([2010-05-24 01:27:19]) = 1274664439.000000000
start_init: trying /sbin/init
wlan0: bpf attached
wlan0: bpf attached
wlan0: Ethernet address: 00:0b:7d:13:3f:ef
bwn0: firmware version (rev 410 patch 2160 date 0x751a time 0x7c0a)
wlan0: link state changed to UP
bwn0: need multicast update callback

--------------050401010107000407030506--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4BF9CF9E.1000205>