Date: Mon, 9 Apr 2001 03:36:36 -0700 From: "-George Georgiou-" <djdisciple@home.com> To: <freebsd-questions@FreeBSD.org> Subject: Kernel make fails Message-ID: <000901c0c0e0$f4a5d590$9df34318@murs>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. ------=_NextPart_000_0005_01C0C0A6.47CD60C0 Content-Type: multipart/alternative; boundary="----=_NextPart_001_0006_01C0C0A6.47CD60C0" ------=_NextPart_001_0006_01C0C0A6.47CD60C0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable I'm just trying to figure out why I can't do a "make depend" on my newly = configured kernel. Here's the error I get: ../../dev/xe/if_xe.c:138: card_if.h: No such file or directory mkdep: compile failed *** Error code 1 Stop in /usr/src/sys/compile/MYKERNEL I've included a copy of MYKERNEL kernel configuration Your help is much appreciated, keep up the excellent work Regards, George Georgiou ------=_NextPart_001_0006_01C0C0A6.47CD60C0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META content=3D"text/html; charset=3Diso-8859-1" = http-equiv=3DContent-Type> <META content=3D"MSHTML 5.00.3315.2869" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=3D#ffffff> <DIV><FONT face=3DArial size=3D2>I'm just trying to figure out why I = can't do a=20 "make depend" on my newly configured kernel.</FONT></DIV> <DIV> </DIV> <DIV><FONT face=3DArial size=3D2>Here's the error I get:</FONT></DIV> <DIV> </DIV> <DIV><FONT face=3DArial size=3D2>../../dev/xe/if_xe.c:138: card_if.h: No = such file=20 or directory</FONT></DIV> <DIV><FONT face=3DArial size=3D2>mkdep: compile failed</FONT></DIV> <DIV><FONT face=3DArial size=3D2>*** Error code 1</FONT></DIV> <DIV> </DIV> <DIV><FONT face=3DArial size=3D2>Stop in = /usr/src/sys/compile/MYKERNEL</FONT></DIV> <DIV> </DIV> <DIV><FONT face=3DArial size=3D2>I've included a copy of MYKERNEL kernel = configuration</FONT></DIV> <DIV><FONT face=3DArial size=3D2>Your help is much appreciated, keep up = the=20 excellent work</FONT></DIV> <DIV> </DIV> <DIV><FONT face=3DArial size=3D2>Regards,</FONT></DIV> <DIV> </DIV> <DIV><FONT face=3DArial size=3D2>George = Georgiou</FONT></DIV></BODY></HTML> ------=_NextPart_001_0006_01C0C0A6.47CD60C0-- ------=_NextPart_000_0005_01C0C0A6.47CD60C0 Content-Type: application/octet-stream; name="MYKERNEL" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="MYKERNEL" #=0A= # GENERIC -- Generic kernel configuration file for FreeBSD/i386=0A= #=0A= # For more information on this file, please read the handbook section on=0A= # Kernel Configuration Files:=0A= #=0A= # http://www.FreeBSD.org/handbook/kernelconfig-config.html=0A= #=0A= # The handbook is also available locally in /usr/share/doc/handbook=0A= # if you've installed the doc distribution, otherwise always see the=0A= # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the=0A= # latest information.=0A= #=0A= # An exhaustive list of options and more detailed explanations of the=0A= # device lines is also present in the ./LINT configuration file. If you = are=0A= # in doubt as to the purpose or necessity of a line, check first in LINT.=0A= #=0A= # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.20 2000/10/31 23:16:07 = n_hibma Exp $=0A= =0A= machine i386=0A= #cpu I386_CPU=0A= #cpu I486_CPU=0A= #cpu I586_CPU=0A= cpu I686_CPU=0A= ident MYKERNEL=0A= maxusers 32=0A= =0A= #makeoptions DEBUG=3D-g #Build kernel with gdb(1) debug symbols=0A= =0A= #options MATH_EMULATE #Support for x87 emulation=0A= options INET #InterNETworking=0A= #options INET6 #IPv6 communications protocols=0A= options FFS #Berkeley Fast Filesystem=0A= options FFS_ROOT #FFS usable as root device [keep this!]=0A= options SOFTUPDATES #Enable FFS soft updates support=0A= options MFS #Memory Filesystem=0A= options MD_ROOT #MD is a potential root device=0A= #options NFS #Network Filesystem=0A= #options NFS_ROOT #NFS usable as root device, NFS required=0A= options MSDOSFS #MSDOS Filesystem=0A= options CD9660 #ISO 9660 Filesystem=0A= options CD9660_ROOT #CD-ROM usable as root, CD9660 required=0A= options PROCFS #Process filesystem=0A= options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]=0A= #options SCSI_DELAY=3D15000 #Delay (in ms) before probing SCSI=0A= options UCONSOLE #Allow users to grab the console=0A= options USERCONFIG #boot -c editor=0A= options VISUAL_USERCONFIG #visual boot -c editor=0A= options KTRACE #ktrace(1) support=0A= options SYSVSHM #SYSV-style shared memory=0A= options SYSVMSG #SYSV-style message queues=0A= options SYSVSEM #SYSV-style semaphores=0A= options P1003_1B #Posix P1003_1B real-time extensions=0A= options _KPOSIX_PRIORITY_SCHEDULING=0A= options ICMP_BANDLIM #Rate limit bad replies=0A= options KBD_INSTALL_CDEV # install a CDEV entry in /dev=0A= =0A= # To make an SMP kernel, the next two are needed=0A= #options SMP # Symmetric MultiProcessor Kernel=0A= #options APIC_IO # Symmetric (APIC) I/O=0A= =0A= device isa=0A= #device eisa=0A= device pci=0A= =0A= # Floppy drives=0A= device fdc0 at isa? port IO_FD1 irq 6 drq 2=0A= device fd0 at fdc0 drive 0=0A= #device fd1 at fdc0 drive 1=0A= =0A= # ATA and ATAPI devices=0A= device ata0 at isa? port IO_WD1 irq 14=0A= device ata1 at isa? port IO_WD2 irq 15=0A= device ata=0A= device atadisk # ATA disk drives=0A= device atapicd # ATAPI CDROM drives=0A= device atapifd # ATAPI floppy drives=0A= #device atapist # ATAPI tape drives=0A= options ATA_STATIC_ID #Static device numbering=0A= options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices=0A= =0A= # atkbdc0 controls both the keyboard and the PS/2 mouse=0A= device atkbdc0 at isa? port IO_KBD=0A= device atkbd0 at atkbdc? irq 1 flags 0x1=0A= device psm0 at atkbdc? irq 12=0A= =0A= device vga0 at isa?=0A= =0A= # splash screen/screen saver=0A= pseudo-device splash=0A= =0A= # syscons is the default console driver, resembling an SCO console=0A= device sc0 at isa? flags 0x100=0A= =0A= # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver=0A= #device vt0 at isa?=0A= #options XSERVER # support for X server on a vt console=0A= #options FAT_CURSOR # start with block cursor=0A= # If you have a ThinkPAD, uncomment this along with the rest of the PCVT = lines=0A= #options PCVT_SCANSET=3D2 # IBM keyboards are non-std=0A= =0A= # Floating point support - do not disable.=0A= device npx0 at nexus? port IO_NPX irq 13=0A= =0A= # Power management support (see LINT for more options)=0A= device apm0 at nexus? disable flags 0x20 # Advanced Power Management=0A= =0A= # Serial (COM) ports=0A= device sio0 at isa? port IO_COM1 flags 0x10 irq 4=0A= #device sio1 at isa? port IO_COM2 irq 3=0A= #device sio2 at isa? disable port IO_COM3 irq 5=0A= #device sio3 at isa? disable port IO_COM4 irq 9=0A= =0A= # Parallel port=0A= #device ppc0 at isa? irq 7=0A= #device ppbus # Parallel port bus (required)=0A= #device lpt # Printer=0A= #device plip # TCP/IP over parallel=0A= #device ppi # Parallel port interface device=0A= #device vpo # Requires scbus and da=0A= =0A= # PCI Ethernet NICs.=0A= #device de # DEC/Intel DC21x4x (``Tulip'')=0A= #device fxp # Intel EtherExpress PRO/100B (82557, 82558)=0A= #device tx # SMC 9432TX (83c170 ``EPIC'')=0A= device vx # 3Com 3c590, 3c595 (``Vortex'')=0A= #device wx # Intel Gigabit Ethernet Card (``Wiseman'')=0A= =0A= # PCI Ethernet NICs that use the common MII bus controller code.=0A= # NOTE: Be sure to keep the 'device miibus' line in order to use these = NICs!=0A= device miibus # MII bus support=0A= #device dc # DEC/Intel 21143 and various workalikes=0A= #device pcn # AMD Am79C79x PCI 10/100 NICs=0A= #device rl # RealTek 8129/8139=0A= #device sf # Adaptec AIC-6915 (``Starfire'')=0A= #device sis # Silicon Integrated Systems SiS 900/SiS 7016=0A= #device ste # Sundance ST201 (D-Link DFE-550TX)=0A= #device tl # Texas Instruments ThunderLAN=0A= #device vr # VIA Rhine, Rhine II=0A= #device wb # Winbond W89C840F=0A= device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')=0A= =0A= # ISA Ethernet NICs.=0A= =0A= #device ed0 at isa? port 0x280 irq 10 iomem 0xd8000=0A= #device ex=0A= #device ep=0A= #device fe0 at isa? port 0x300=0A= # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really=0A= # exists only as a PCMCIA device, so there is no ISA attatement needed=0A= # and resources will always be dynamically assigned by the pccard code.=0A= #device wi=0A= # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below = will=0A= # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP=0A= # mode (the factory default). If you set the switches on your ISA=0A= # card for a manually chosen I/O address and IRQ, you must specify=0A= # those paremeters here.=0A= #device an=0A= # Xircom Ethernet=0A= device xe=0A= # The probe order of these is presently determined by = i386/isa/isa_compat.c.=0A= #device ie0 at isa? port 0x300 irq 10 iomem 0xd0000=0A= #device le0 at isa? port 0x300 irq 5 iomem 0xd0000=0A= #device lnc0 at isa? port 0x280 irq 10 drq 0=0A= #device cs0 at isa? port 0x300=0A= #device sn0 at isa? port 0x300 irq 10=0A= =0A= # Pseudo devices - the number indicates how many units to allocated.=0A= pseudo-device loop # Network loopback=0A= pseudo-device ether # Ethernet support=0A= #pseudo-device sl 1 # Kernel SLIP=0A= #pseudo-device ppp 1 # Kernel PPP=0A= pseudo-device tun # Packet tunnel.=0A= pseudo-device pty # Pseudo-ttys (telnet etc)=0A= pseudo-device md # Memory "disks"=0A= pseudo-device gif 4 # IPv6 and IPv4 tunneling=0A= pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)=0A= =0A= # The `bpf' pseudo-device enables the Berkeley Packet Filter.=0A= # Be aware of the administrative consequences of enabling this!=0A= pseudo-device bpf #Berkeley packet filter=0A= =0A= # USB support=0A= device uhci # UHCI PCI->USB interface=0A= device ohci # OHCI PCI->USB interface=0A= device usb # USB Bus (required)=0A= device ugen # Generic=0A= device uhid # "Human Interface Devices"=0A= #device ukbd # Keyboard=0A= #device ulpt # Printer=0A= #device umass # Disks/Mass storage - Requires scbus and da=0A= device ums # Mouse=0A= #device uscanner # Scanners=0A= # USB Ethernet, requires mii=0A= #device aue # ADMtek USB ethernet=0A= #device cue # CATC USB ethernet=0A= #device kue # Kawasaki LSI USB ethernet=0A= ------=_NextPart_000_0005_01C0C0A6.47CD60C0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000901c0c0e0$f4a5d590$9df34318>