Date: Wed, 04 Feb 2009 13:11:25 +0300 From: Vladimir Grebenschikov <vova@fbsd.ru> To: Hans Petter Selasky <hselasky@c2i.net> Cc: usb@freebsd.org, freebsd-current@freebsd.org Subject: Re: USB2 - umass problem Message-ID: <1233742285.1767.142.camel@localhost> In-Reply-To: <200902041044.27663.hselasky@c2i.net> References: <1233734352.1767.55.camel@localhost> <200902041044.27663.hselasky@c2i.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 2009-02-04 at 10:44 +0100, Hans Petter Selasky wrote: > > Simple umass device (WD external disk) works fine, but > > integrated to doc-station card-reader failed: > > > > First time card insertion, two umass devices appeared, both just do not > > work: > > > > ugen4.4: <SMSC> at usbus4 > > umass0: <SMSC 2228, class 0/0, rev 2.00/3.95, addr 4> on usbus4 > > umass0: SCSI over Bulk-Only; quirks = 0x0000 > > umass0:5:0:-1: Attached to scbus5 > > (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 > > (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > > (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition > > (probe0:umass-sim0:0:0:0): NOT READY asc:3a,0 > > (probe0:umass-sim0:0:0:0): Medium not present > > (probe0:umass-sim0:0:0:0): Unretryable error > > da0 at umass-sim0 bus 0 target 0 lun 0 > > da0: <SMSC 2228 HS-COMBO 3.95> Removable Direct Access SCSI-0 device > > da0: 40.000MB/s transfers > > da0: Attempt to query device size failed: NOT READY, Medium not present > > Have you tried "cat /dev/null > /dev/da0", to refresh the label on the disk? > NOTE: /dev/null is not /dev/zero > > > da1 at umass-sim0 bus 0 target 0 lun 1 > > da1: <SMSC 2228 HS-CF 3.95> Removable Direct Access SCSI-0 device > > da1: 40.000MB/s transfers > > da1: Attempt to query device size failed: NOT READY, Medium not present > > Same with "da1" > > > > > Second time - a bit better, second device read correct card label, but > > still failed on mount: > > Maybe your device needs a quirk, because it hangs on one of the issues SCSI > commands. Have you looked at: > > http://wiki.freebsd.org/USB Probably, did not tried yet, but old usb stack works as expected, did all usb1 quircks imported to usb2 ? -- Vladimir B. Grebenschikov vova@fbsd.ru
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1233742285.1767.142.camel>