Date: Sun, 23 Dec 2007 17:13:12 GMT From: Gabor Molnar <mggabro@gmail.com> To: freebsd-gnats-submit@FreeBSD.org Subject: i386/118973: Kernel panic with acpi boot Message-ID: <200712231713.lBNHDCPS070917@www.freebsd.org> Resent-Message-ID: <200712231720.lBNHK1Zr064388@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 118973 >Category: i386 >Synopsis: Kernel panic with acpi boot >Confidential: no >Severity: critical >Priority: low >Responsible: freebsd-i386 >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Sun Dec 23 17:20:01 UTC 2007 >Closed-Date: >Last-Modified: >Originator: Gabor Molnar >Release: 7.0-BETA4 >Organization: >Environment: >Description: Kernel panic if I booting the GENERIC kernel with ACPI. Here is a picture: http://195.228.66.5/pic/panic.jpg (Sorry, not good quality, create with mobile phone) and my Dmesg with no-ACPI kernel: Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-BETA4 #0: Sun Dec 2 19:19:04 UTC 2007 root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ (2814.44-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x40f33 Stepping = 3 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x2001<SSE3,CX16> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8> Cores per package: 2 real memory = 2147418112 (2047 MB) avail memory = 2091892736 (1994 MB) MPTable: <OEM00000 PROD00000000> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 2 ioapic0: Assuming intbase of 0 ioapic0 <Version 1.1> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) cpu0 on motherboard powernow0: <PowerNow! K8> on cpu0 cpu1 on motherboard powernow1: <PowerNow! K8> on cpu1 pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci0: <memory, RAM> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 1.1 (no driver attached) pci0: <memory, RAM> at device 1.2 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xfd002000-0xfd002fff irq 10 at device 2.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 10 ports with 10 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfd003000-0xfd0030ff irq 11 at device 2.1 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb1: EHCI version 1.0 usb1: companion controller, 10 ports each: usb0 usb1: <EHCI (generic) USB 2.0 controller> on ehci0 usb1: USB revision 2.0 uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1 uhub1: 10 ports with 10 removable, self powered atapci0: <nVidia nForce MCP55 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 4.0 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] atapci1: <nVidia nForce MCP55 SATA300 controller> port 0xa000-0xa007,0xa400-0xa403,0xa800-0xa807,0xac00-0xac03,0xb000-0xb00f mem 0xfd004000-0xfd004fff irq 15 at device 5.0 on pci0 atapci1: [ITHREAD] ata2: <ATA channel 0> on atapci1 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci1 ata3: [ITHREAD] atapci2: <nVidia nForce MCP55 SATA300 controller> port 0xb400-0xb407,0xb800-0xb803,0xbc00-0xbc07,0xc000-0xc003,0xc400-0xc40f mem 0xfd000000-0xfd000fff irq 10 at device 5.1 on pci0 atapci2: [ITHREAD] ata4: <ATA channel 0> on atapci2 ata4: [ITHREAD] ata5: <ATA channel 1> on atapci2 ata5: [ITHREAD] atapci3: <nVidia nForce MCP55 SATA300 controller> port 0xc800-0xc807,0xcc00-0xcc03,0xd000-0xd007,0xd400-0xd403,0xd800-0xd80f mem 0xfd001000-0xfd001fff irq 11 at device 5.2 on pci0 atapci3: [ITHREAD] ata6: <ATA channel 0> on atapci3 ata6: [ITHREAD] ata7: <ATA channel 1> on atapci3 ata7: [ITHREAD] pcib1: <MPTable PCI-PCI bridge> at device 6.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <multimedia, audio> at device 7.0 (no driver attached) pci1: <input device> at device 7.1 (no driver attached) fwohci0: <1394 Open Host Controller Interface> mem 0xfc005000-0xfc0057ff,0xfc000000-0xfc003fff irq 5 at device 7.2 on pci1 fwohci0: [FILTER] fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:02:3c:00:91:04:90:c3 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0x138c000 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:02:3c:04:90:c3 fwe0: Ethernet address: 02:02:3c:04:90:c3 fwip0: <IP over FireWire> on firewire0 fwip0: Firewire address: 00:02:3c:00:91:04:90:c3 @ 0xfffe00000000, S400, maxrec 2048 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x8800-0x887f mem 0xfc004000-0xfc00407f irq 5 at device 8.0 on pci1 miibus0: <MII bus> on xl0 ukphy0: <Generic IEEE 802.3u media interface> PHY 24 on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: Ethernet address: 00:0a:5e:64:db:9e xl0: [ITHREAD] pcib2: <MPTable PCI-PCI bridge> at device 15.0 on pci0 pci2: <PCI bus> on pcib2 vgapci0: <VGA-compatible display> port 0x9000-0x907f mem 0xf8000000-0xf8ffffff,0xe0000000-0xefffffff,0xf9000000-0xf9ffffff irq 7 at device 0.0 on pci2 pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xd0000-0xd07ff pnpid ORM0000 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0303> can't assign resources (port) unknown: <PNP0c01> can't assign resources (memory) unknown: <PNP0f13> can't assign resources (irq) Timecounters tick every 1.000 msec firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) acd0: DVDR <PIONEER DVD-RW DVR-111D/1.23> at ata0-master UDMA66 ad1: 76318MB <SAMSUNG SP0842N BH100-50> at ata0-slave UDMA100 SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad1s1a Sorry for my english, but I hope, you understand me. >How-To-Repeat: Boot with ACPI GENERIC kernel. >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200712231713.lBNHDCPS070917>