Date: Thu, 10 Feb 2005 11:20:37 +0100 From: des@des.no (=?iso-8859-1?q?Dag-Erling_Sm=F8rgrav?=) To: =?iso-8859-1?q?S=F8ren_Schmidt?= <sos@DeepCore.dk> Cc: "freebsd-stable@freebsd.org" <freebsd-stable@freebsd.org> Subject: Re: UPDATE: ATA mkIII first official patches - please test! Message-ID: <86y8dwwway.fsf@dwp.des.no> In-Reply-To: <420A1792.900@DeepCore.dk> =?iso-8859-1?q?=28S=F8ren?= Schmidt's message of "Wed, 09 Feb 2005 15:00:50 %2B0100") References: <42028F29.1030801@DeepCore.dk> <420A1792.900@DeepCore.dk>
next in thread | previous in thread | raw e-mail | index | archive | help
--=-=-=
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: quoted-printable
S=F8ren Schmidt <sos@DeepCore.dk> writes:
> As always, enjoy and let me know how it goes...
Peachy.
DES
--=20
Dag-Erling Sm=F8rgrav - des@des.no
--=-=-=
Content-Disposition: attachment; filename=dmesg.xps
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-CURRENT #3: Thu Feb 10 10:51:56 CET 2005
des@xps.des.no:/usr/obj/usr/src/sys/xps
Preloaded elf kernel "/boot/xps/kernel" at 0xc0786000.
Preloaded elf module "/boot/xps/vesa.ko" at 0xc07861c4.
Preloaded elf module "/boot/xps/acpi.ko" at 0xc078626c.
Preloaded elf module "/boot/xps/acpi_perf.ko" at 0xc0786314.
Calibrating clock(s) ... i8254 clock: 1193190 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 3591024219 Hz
CPU: Intel(R) Pentium(R) 4 CPU 3.60GHz (3591.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf34 Stepping = 4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 2145959936 (2046 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000825000 - 0x000000007da2afff, 2099273728 bytes (512518 pages)
avail memory = 2099228672 (2001 MB)
Table 'FACP' at 0xfcce7
Table 'SSDT' at 0xfffc9563
Table 'APIC' at 0xfcd5b
MADT: Found table at 0xfcd5b
MP Configuration Table version 1.4 found at 0xc00f0000
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
MADT: Found CPU APIC ID 1 ACPI ID 2: enabled
MADT: Found CPU APIC ID 1 ACPI ID 3: disabled
MADT: Found CPU APIC ID 7 ACPI ID 4: disabled
ACPI APIC Table: <DELL XPSGEN3>
APIC: CPU 0 has ACPI ID 1
bios32: Found BIOS32 Service Directory header at 0xc00ffe80
bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb757
pnpbios: Found PnP BIOS data at 0xc00fe2d0
pnpbios: Entry = f0000:e2f4 Rev = 1.0
Other BIOS signatures found:
MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 8
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: intr override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: intr override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: high
lapic: Routing NMI -> LINT1
lapic: LINT1 trigger: level
lapic: LINT1 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
lapic0: Forcing LINT1 to edge trigger
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
io: <I/O>
null: <null device, zero device>
VESA: information block
56 45 53 41 00 03 1c 02 00 c0 01 00 00 00 22 00
00 01 00 01 01 09 6b 01 00 00 94 00 00 00 e0 51
00 00 00 01 01 01 03 01 05 01 07 01 10 01 11 01
12 01 13 01 14 01 15 01 16 01 17 01 18 01 19 01
VESA: 73 mode(s) found
VESA: v3.0, 16384k memory, flags:0x1, mode table:0xc0721622 (1000022)
VESA: ATI ATOMBIOS
VESA: \M-p\^_\M-* \^_\M-*
random: <entropy source, Software, Yarrow>
mem: <memory>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL XPSGEN3> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80010054
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25848086)
pcibios: BIOS version 2.10
Found $PIR table, 13 entries at 0xc00feb00
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 31 A 0x60 3 4 5 6 7 9 10 11 14 15
embedded 0 31 B 0x61 3 4 5 6 7 9 10 11 14 15
embedded 0 31 C 0x68 3 4 5 6 7 9 10 11 14 15
embedded 0 29 A 0x69 3 4 5 6 7 9 10 11 14 15
embedded 0 29 B 0x6a 3 4 5 6 7 9 10 11 14 15
embedded 0 29 C 0x62 3 4 5 6 7 9 10 11 14 15
embedded 0 29 D 0x6b 3 4 5 6 7 9 10 11 14 15
embedded 0 30 A 0x6b 3 4 5 6 7 9 10 11 14 15
embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 14 15
slot 1 4 0 A 0x60 3 4 5 6 7 9 10 11 14 15
slot 1 4 0 B 0x61 3 4 5 6 7 9 10 11 14 15
slot 1 4 0 C 0x62 3 4 5 6 7 9 10 11 14 15
slot 1 4 0 D 0x63 3 4 5 6 7 9 10 11 14 15
slot 2 4 1 A 0x61 3 4 5 6 7 9 10 11 14 15
slot 2 4 1 B 0x62 3 4 5 6 7 9 10 11 14 15
slot 2 4 1 C 0x63 3 4 5 6 7 9 10 11 14 15
slot 2 4 1 D 0x60 3 4 5 6 7 9 10 11 14 15
slot 3 4 2 A 0x62 3 4 5 6 7 9 10 11 14 15
slot 3 4 2 B 0x63 3 4 5 6 7 9 10 11 14 15
slot 3 4 2 C 0x60 3 4 5 6 7 9 10 11 14 15
slot 3 4 2 D 0x61 3 4 5 6 7 9 10 11 14 15
slot 4 4 3 A 0x60 3 4 5 6 7 9 10 11 14 15
slot 4 4 3 B 0x62 3 4 5 6 7 9 10 11 14 15
slot 4 4 3 C 0x61 3 4 5 6 7 9 10 11 14 15
slot 4 4 3 D 0x63 3 4 5 6 7 9 10 11 14 15
embedded 2 0 A 0x60 3 4 5 6 7 9 10 11 14 15
slot 5 3 0 A 0x61 3 4 5 6 7 9 10 11 14 15
slot 5 3 0 B 0x62 3 4 5 6 7 9 10 11 14 15
slot 5 3 0 C 0x63 3 4 5 6 7 9 10 11 14 15
slot 5 3 0 D 0x60 3 4 5 6 7 9 10 11 14 15
embedded 4 7 A 0x63 3 4 5 6 7 9 10 11 14 15
embedded 0 1 A 0x60 3 4 5 6 7 9 10 11 14 15
embedded 0 1 B 0x61 3 4 5 6 7 9 10 11 14 15
embedded 0 1 C 0x62 3 4 5 6 7 9 10 11 14 15
embedded 0 1 D 0x63 3 4 5 6 7 9 10 11 14 15
embedded 0 28 A 0x60 3 4 5 6 7 9 10 11 14 15
embedded 0 28 B 0x61 3 4 5 6 7 9 10 11 14 15
embedded 0 28 C 0x62 3 4 5 6 7 9 10 11 14 15
embedded 0 28 D 0x63 3 4 5 6 7 9 10 11 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
ACPI timer: 1/1 1/1 1/1 1/1 0/614 1/1 1/1 1/1 1/1 1/1 -> 9
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x2584, revid=0x04
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2585, revid=0x04
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0a (2500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2660, revid=0x03
bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 17
found-> vendor=0x8086, dev=0x2662, revid=0x03
bus=0, slot=28, func=1
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=b, irq=17
map[20]: type 4, range 32, base 0000ff80, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 21
found-> vendor=0x8086, dev=0x2658, revid=0x03
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=21
map[20]: type 4, range 32, base 0000ff60, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 22
found-> vendor=0x8086, dev=0x2659, revid=0x03
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=22
map[20]: type 4, range 32, base 0000ff40, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x265a, revid=0x03
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=18
map[20]: type 4, range 32, base 0000ff20, size 5, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 23
found-> vendor=0x8086, dev=0x265b, revid=0x03
bus=0, slot=29, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=23
map[10]: type 1, range 32, base ffa80800, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 21
found-> vendor=0x8086, dev=0x265c, revid=0x03
bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=21
powerspec 2 supports D0 D3 current D0
found-> vendor=0x8086, dev=0x244e, revid=0xd3
bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2640, revid=0x03
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0107, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000ffa0, size 4, enabled
pcib0: matched entry for 0.31.INTA
pcib0: slot 31 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x266f, revid=0x03
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
map[10]: type 4, range 32, base 0000fe00, size 3, enabled
map[14]: type 4, range 32, base 0000fe10, size 2, enabled
map[18]: type 4, range 32, base 0000fe20, size 3, enabled
map[1c]: type 4, range 32, base 0000fe30, size 2, enabled
map[20]: type 4, range 32, base 0000fea0, size 4, enabled
map[24]: type 1, range 32, base dffffc00, size 10, enabled
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 20
found-> vendor=0x8086, dev=0x2652, revid=0x03
bus=0, slot=31, func=2
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=20
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000ece0, size 5, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 17
found-> vendor=0x8086, dev=0x266a, revid=0x03
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0101, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=17
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xd000-0xdfff
pcib1: memory decode 0xdfd00000-0xdfefffff
pcib1: prefetched decode 0xc0000000-0xcfffffff
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 3, range 32, base c0000000, size 28, enabled
pcib1: device (null) requested decoded memory range 0xc0000000-0xcfffffff
map[14]: type 4, range 32, base 0000dc00, size 8, enabled
pcib1: device (null) requested decoded I/O range 0xdc00-0xdcff
map[18]: type 1, range 32, base dfde0000, size 16, enabled
pcib1: device (null) requested decoded memory range 0xdfde0000-0xdfdeffff
pcib1: matched entry for 1.0.INTA
pcib1: slot 0 INTA hardwired to IRQ 16
found-> vendor=0x1002, dev=0x5d57, revid=0x00
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0003, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 32, base dfdf0000, size 16, enabled
pcib1: device (null) requested decoded memory range 0xdfdf0000-0xdfdfffff
found-> vendor=0x1002, dev=0x5d77, revid=0x00
bus=1, slot=0, func=1
class=03-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D1 D2 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
pci1: <display> at device 0.1 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xf000-0xfff
pcib2: memory decode 0xdfc00000-0xdfcfffff
pcib2: prefetched decode 0xfff00000-0xfffff
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
map[10]: type 1, range 64, base dfcf0000, size 16, enabled
pcib2: device (null) requested decoded memory range 0xdfcf0000-0xdfcfffff
pcib2: matched entry for 2.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 16
found-> vendor=0x14e4, dev=0x1677, revid=0x01
bus=2, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
bge0: <Broadcom BCM5751 Gigabit Ethernet, ASIC rev. 0x4001> mem 0xdfcf0000-0xdfcfffff irq 16 at device 0.0 on pci2
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xdfcf0000
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: bpf attached
bge0: Ethernet address: 00:11:11:5a:cf:e7
bge0: [MPSAFE]
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0xf000-0xfff
pcib3: memory decode 0xdfb00000-0xdfbfffff
pcib3: prefetched decode 0xfff00000-0xfffff
pci3: <ACPI PCI bus> on pcib3
pci3: physical bus=3
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0xff80-0xff9f irq 21 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xff80
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0xff60-0xff7f irq 22 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xff60
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0xff40-0xff5f irq 18 at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xff40
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0xff20-0xff3f irq 23 at device 29.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xff20
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ukbd0: Logitech USB Receiver, rev 1.10/21.00, addr 2, iclass 3/1
kbd: new array size 4
kbd1 at ukbd0
kbd1: ukbd0, generic (0), config:0x0, flags:0x1d0000
ums0: Logitech USB Receiver, rev 1.10/21.00, addr 2, iclass 3/1
ums0: 7 buttons and Z dir.
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pci0:29:7: Transition from D0 to D3
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0xc000-0xcfff
pcib4: memory decode 0xdfa00000-0xdfafffff
pcib4: prefetched decode 0xfff00000-0xfffff
pcib4: Subtractively decoded bridge.
pci4: <ACPI PCI bus> on pcib4
pci4: physical bus=4
map[10]: type 1, range 32, base dfaf0000, size 16, enabled
pcib4: device (null) requested decoded memory range 0xdfaf0000-0xdfafffff
map[14]: type 4, range 32, base 0000ccb8, size 3, enabled
pcib4: device (null) requested decoded I/O range 0xccb8-0xccbf
pcib4: matched entry for 4.1.INTA
pcib4: slot 1 INTA hardwired to IRQ 17
found-> vendor=0x14f1, dev=0x2f20, revid=0x00
bus=4, slot=1, func=0
class=07-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=17
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000ccc0, size 6, enabled
pcib4: device (null) requested decoded I/O range 0xccc0-0xccff
pcib4: matched entry for 4.2.INTA
pcib4: slot 2 INTA hardwired to IRQ 18
found-> vendor=0x1102, dev=0x0004, revid=0x04
bus=4, slot=2, func=0
class=04-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0105, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x14 (5000 ns)
intpin=a, irq=18
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base dfae7000, size 11, enabled
pcib4: device (null) requested decoded memory range 0xdfae7000-0xdfae77ff
map[14]: type 1, range 32, base dfae8000, size 14, enabled
pcib4: device (null) requested decoded memory range 0xdfae8000-0xdfaebfff
pcib4: matched entry for 4.2.INTB
pcib4: slot 2 INTB hardwired to IRQ 19
found-> vendor=0x1102, dev=0x4001, revid=0x04
bus=4, slot=2, func=2
class=0c-00-10, hdrtype=0x00, mfdev=1
cmdreg=0x0116, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=b, irq=19
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base dfae7800, size 11, enabled
pcib4: device (null) requested decoded memory range 0xdfae7800-0xdfae7fff
map[14]: type 1, range 32, base dfaec000, size 14, enabled
pcib4: device (null) requested decoded memory range 0xdfaec000-0xdfaeffff
pcib4: matched entry for 4.7.INTA
pcib4: slot 7 INTA hardwired to IRQ 19
found-> vendor=0x104c, dev=0x8024, revid=0x00
bus=4, slot=7, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0116, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=19
powerspec 2 supports D0 D1 D2 D3 current D0
pci4: <simple comms> at device 1.0 (no driver attached)
pci4:1:0: Transition from D0 to D3
pci4: <multimedia, audio> at device 2.0 (no driver attached)
pci4:2:0: Transition from D0 to D3
pci4: <serial bus, FireWire> at device 2.2 (no driver attached)
pci4:2:2: Transition from D0 to D3
pci4: <serial bus, FireWire> at device 7.0 (no driver attached)
pci4:7:0: Transition from D0 to D3
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 UDMA100 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 16 at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=00 ostat1=10
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ata1: [MPSAFE]
atapci1: <Intel ICH6 SATA150 controller> port 0xfea0-0xfeaf,0xfe30-0xfe33,0xfe20-0xfe27,0xfe10-0xfe13,0xfe00-0xfe07 mem 0xdffffc00-0xdfffffff irq 20 at device 31.2 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfea0
atapci1: [MPSAFE]
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xfe00
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xfe10
ata2: reset tp1 mask=03 ostat0=80 ostat1=80
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: stat1=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xfe20
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xfe30
ata3: reset tp1 mask=03 ostat0=7f ostat1=7f
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: reset tp2 stat0=ff stat1=7f devices=0x0
ata3: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0:31:3: Transition from D0 to D3
pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11 12 15
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11 12 15
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 15
pci_link1: <ACPI PCI Link LNKB> irq 10 on acpi0
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 9 10 11 12 15
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 9 10 11 12 15
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 15
pci_link2: <ACPI PCI Link LNKC> irq 3 on acpi0
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 3 N 0 3 4 5 6 7 9 10 11 12 15
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 3 N 0 3 4 5 6 7 9 10 11 12 15
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 15
pci_link3: <ACPI PCI Link LNKD> irq 9 on acpi0
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 5 6 7 9 10 11 12 15
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 5 6 7 9 10 11 12 15
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 15
pci_link4: <ACPI PCI Link LNKE> irq 5 on acpi0
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 9 10 11 12 15
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 9 10 11 12 15
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 15
pci_link5: <ACPI PCI Link LNKF> irq 9 on acpi0
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 5 6 7 9 10 11 12 15
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 5 6 7 9 10 11 12 15
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 15
pci_link6: <ACPI PCI Link LNKG> irq 5 on acpi0
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 9 10 11 12 15
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 9 10 11 12 15
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 15
pci_link7: <ACPI PCI Link LNKH> irq 10 on acpi0
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 9 10 11 12 15
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 9 10 11 12 15
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 15
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <ECP parallel printer port> port 0x778-0x77f,0x378-0x37f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: irq maps: 0xca9 0xcb9 0xca9 0xca9
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xd3800-0xd3fff,0xcf000-0xd37ff,0xcd800-0xcefff,0xc0000-0xcd7ff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0xffffffff (1)
atkbd: failed to reset the keyboard.
kbd0 at atkbd0
kbd0: atkbd0, AT 84 (1), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0065
psm0: failed to reset the aux device.
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0xca9 0xca9 0xca9 0xca9
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 134525 -> 100000
Timecounter "TSC" frequency 3591024219 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on Intel ICH6 chip
acd0: setting UDMA33 on Intel ICH6 chip
acd0: <HL-DT-STDVD-ROM GDR8163B/0D20> DVDROM drive at ata0 as master
acd0: read 8268KB/s (8268KB/s), 256KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM 120mm data disc
acd1: setting PIO4 on Intel ICH6 chip
acd1: setting UDMA33 on Intel ICH6 chip
acd1: <Philips DVD+RW DVD8601/6D11> CDRW drive at ata0 as slave
acd1: read 6890KB/s (6890KB/s) write 6890KB/s (6890KB/s), 2048KB buffer, UDMA33
acd1: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd1: Writes: CDR, CDRW, test write, burnproof
acd1: Audio: play, 2 volume levels
acd1: Mechanism: ejectable tray, unlocked
acd1: Medium: CD-ROM 120mm audio disc
ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: 238418MB <WDC WD2500JD-75HBB0 08.02D08> at ata2-master SATA150
ad4: 488281250 sectors [484406C/16H/63S] 16 sectors/interrupt 1 depth queue
ad4: Intel calc=f09b4d1e meta=f84da68f
ad4: Intel check2 failed
********* ATA Intel MatrixRAID Metadata *********
intel_id <Intel Raid ISM Cfg Sig. >
version <1.0.00>
checksum 0xf84da68f
config_size 0x000001e0
config_id 0xef10e50c
generation 0x000000ef
total_disks 2
total_volumes 1
DISK# serial disk_sectors disk_id flags
0 <WD-WMAL71853150> 488281250 0x00000000 0x0000013a
1 <WD-WMAL71852094> 488281250 0x00000100 0x0000013a
name ARRAY
total_sectors 976561664
state 0
reserved 0
offset 0
disk_sectors 488280832
stripe_count 1907347
stripe_sectors 256
status 0
type RAID0
total_disks 2
disk 0 at disk_idx 0x00000000
disk 1 at disk_idx 0x00000001
=================================================
ad5: 238418MB <WDC WD2500JD-75HBB0 08.02D08> at ata2-slave SATA150
ad5: 488281250 sectors [484406C/16H/63S] 16 sectors/interrupt 1 depth queue
ad5: Intel calc=f09b4d1e meta=f84da68f
ad5: Intel check2 failed
********* ATA Intel MatrixRAID Metadata *********
intel_id <Intel Raid ISM Cfg Sig. >
version <1.0.00>
checksum 0xf84da68f
config_size 0x000001e0
config_id 0xef10e50c
generation 0x000000ef
total_disks 2
total_volumes 1
DISK# serial disk_sectors disk_id flags
0 <WD-WMAL71853150> 488281250 0x00000000 0x0000013a
1 <WD-WMAL71852094> 488281250 0x00000100 0x0000013a
name ARRAY
total_sectors 976561664
state 0
reserved 0
offset 0
disk_sectors 488280832
stripe_count 1907347
stripe_sectors 256
status 0
type RAID0
total_disks 2
disk 0 at disk_idx 0x00000000
disk 1 at disk_idx 0x00000001
=================================================
ATA PseudoRAID loaded
********** ATA PseudoRAID ar0 Metadata **********
=================================================
format Intel MatrixRAID
type RAID0
flags 0x01 1<READY>
magic_0 0x00000000ef10e50c
magic_1 0x0000000000000000
generation 239
total_sectors 976561664
offset_sectors 0
heads 255
sectors 63
cylinders 60788
width 2
interleave 256
total_disks 2
disk 0: flags = 0x0b b<ONLINE,ASSIGNED,PRESENT>
ad4: sectors 488280832
disk 1: flags = 0x0b b<ONLINE,ASSIGNED,PRESENT>
ad5: sectors 488280832
=================================================
ar0: 476836MB <Intel MatrixRAID RAID0 array> status: READY
ar0: 976561664 sectors [60788C/255H/63S] <ARRAY> subdisks defined as:
ar0: disk0 READY using ad4 at ata2-master
ar0: disk1 READY using ad5 at ata2-slave
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0
ioapic0: routing intpin 7 (ISA IRQ 7) to cluster 0
ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0
ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 16 (PCI IRQ 16) to cluster 0
ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0
ioapic0: routing intpin 20 (PCI IRQ 20) to cluster 0
ioapic0: routing intpin 21 (PCI IRQ 21) to cluster 0
ioapic0: routing intpin 22 (PCI IRQ 22) to cluster 0
ioapic0: routing intpin 23 (PCI IRQ 23) to cluster 0
GEOM: new disk ad4
GEOM: new disk ad5
GEOM: new disk ar0
Trying to mount root from ufs:/dev/ar0s3a
start_init: trying /sbin/init
--=-=-=--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?86y8dwwway.fsf>