Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 05 Jul 2011 13:30:47 +0200
From:      Bernt Hansson <bernt@bah.homeip.net>
To:        Achilleas Mantzios <achill@matrix.gatewaynet.com>
Cc:        freebsd-multimedia@freebsd.org, freebsd-hardware@freebsd.org
Subject:   Re: FreeBSD and controlling an alarm via relay
Message-ID:  <4E12F5E7.3020905@bah.homeip.net>
In-Reply-To: <201107051302.55404.achill@matrix.gatewaynet.com>
References:  <201107041339.22470.achill@matrix.gatewaynet.com>	<4E12CE42.20305@bah.homeip.net> <201107051302.55404.achill@matrix.gatewaynet.com>

next in thread | previous in thread | raw e-mail | index | archive | help
2011-07-05 12:02, Achilleas Mantzios skrev:
> Στις Tuesday 05 July 2011 11:41:38 ο/η Bernt Hansson έγραψε:
>> 2011-07-04 12:39, Achilleas Mantzios skrev:
>>> Hello, sorry for the cross-post but i believe this question might seat in both lists.
>>> I am the guy who had the done the old 1.23.3 zoneminder port some years ago, and i am thinking of installing/testing
>>> the new 1.24.4 port, submitted by bsam@FreeBSD.org.
>>> Besides the basic functions, i am thinking of re-using some old techniques by which i controlled
>>> the home alarm via a NC/NO circuit (basically it was an enhanced door contact),
>>> driven by an old zyXel modem,  which in turn was driven by a small perl program driving the com port, and
>>> which was called by a deamon reading zoneminder shared memory info directly.
>>> That way i could trigger the alarm system getting into alarm state, whenever zoneminder detected motion,
>>> in a fully controlled and programmatic way.
>>
>> Is this what you you are looking for
>>
>> http://www.telldus.se/products/tellstick
>>
>
> Basically i am thinking of something like this:
> http://www.ebay.co.uk/itm/USB-Eight-Channel-Relay-Board-RS232-Serial-Controlled-/110710829016?pt=UK_BOI_Electrical_Components_Supplies_ET&hash=item19c6e12fd8
> a USB controlled 8-channel relay board, rs232 serial controlled

OK. Velleman has 8 & 16 channel relay boards, K8056, K6714 (8channels) 
and K6714-16 (16Channels). I have an schematic from elektor/elektuur 
with which you can control 64+ outputs from the printerport.

> What would be my chances with this on FreeBSD 8.2?
>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4E12F5E7.3020905>