Date: Sat, 22 Aug 1998 06:04:36 -0700 (PDT) From: asami@FreeBSD.ORG (Satoshi Asami) To: ports@FreeBSD.ORG Subject: Re: final plist patch + major comment rewrite Message-ID: <199808221304.GAA14421@silvia.hip.berkeley.edu> In-Reply-To: <199808221239.FAA14375@silvia.hip.berkeley.edu> (asami@cs.berkeley.edu)
next in thread | previous in thread | raw e-mail | index | archive | help
Eek!
As soon as I send it out, I realized that I completely forgot the
purpose of the documentation change -- to add descriptions of new
variables. ;)
Here, the updated one. Sorry....
Satoshi
-------
Index: bsd.port.mk
===================================================================
RCS file: /usr/cvs/src/share/mk/bsd.port.mk,v
retrieving revision 1.227.2.46
diff -c -r1.227.2.46 bsd.port.mk
*** bsd.port.mk 1998/08/15 17:37:46 1.227.2.46
--- bsd.port.mk 1998/08/22 12:59:33
***************
*** 11,196 ****
# There are two different types of "maintainers" in the whole ports
# framework concept. Maintainers of the bsd.port*.mk files
! # are listed below in the ${OSNAME}_MAINTAINER entries (this file
# is used by multiple *BSD flavors). You should consult them directly
# if you have any questions/suggestions regarding this file since only
# they are allowed to modify the master copies in the CVS repository!
# For each port, the MAINTAINER variable is what you should consult for
# contact information on the person(s) to contact if you have questions/
# suggestions about that specific port. By default (if no MAINTAINER
# is listed), a port is maintained by the subscribers of the ports@freebsd.org
# mailing list, and any correspondece should be directed there.
#
! FreeBSD_MAINTAINER= asami@FreeBSD.ORG
! OpenBSD_MAINTAINER= imp@OpenBSD.ORG
!
! # Supported Variables and their behaviors:
#
! # Variables that typically apply to all ports:
#
# ARCH - The architecture, as returned by "uname -m".
# OPSYS - Portability clause. This is the operating system the
# makefile is being used on. Automatically set to
# "FreeBSD," "NetBSD," or "OpenBSD" as appropriate.
# OSREL - The release version (numeric) of the operating system.
- # PORTSDIR - The root of the ports tree. Defaults:
- # FreeBSD/OpenBSD: /usr/ports
- # NetBSD: /usr/opt
- # DISTDIR - Where to get gzip'd, tarballed copies of original sources
- # (default: ${PORTSDIR}/distfiles).
- # PREFIX - Where to install things in general (default: /usr/local).
- # MASTER_SITES - Primary location(s) for distribution files if not found
- # locally.
- # PATCH_SITES - Primary location(s) for distribution patch files
- # (see PATCHFILES below) if not found locally.
#
! # MASTER_SITE_BACKUP - Backup location(s) for distribution files and patch
! # files if not found locally and ${MASTER_SITES}/${PATCH_SITES}
! # (default:
! # ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/${DIST_SUBDIR}/)
! # MASTER_SITE_OVERRIDE - If set, override the MASTER_SITES setting with this
! # value.
! # MASTER_SITE_FREEBSD - If set, only use ${MASTER_SITE_BACKUP} for
! # MASTER_SITES.
! # PACKAGES - A top level directory where all packages go (rather than
! # going locally to each port). (default: ${PORTSDIR}/packages).
! # GMAKE - Set to path of GNU make if not in $PATH (default: gmake).
! # AUTOCONF - Set to path of GNU autoconf if not in $PATH (default: autoconf).
! # XMKMF - Set to path of `xmkmf' if not in $PATH (default: xmkmf -a ).
! # MAINTAINER - The e-mail address of the contact person for this port
! # (default: ports@FreeBSD.ORG).
# CATEGORIES - A list of descriptive categories into which this port falls.
#
! # Variables that typically apply to an individual port. Non-Boolean
! # variables without defaults are *mandatory*.
#
- # WRKDIR - A temporary working directory that gets *clobbered* on clean
- # (default: ${.CURDIR}/work).
- # WRKSRC - A subdirectory of ${WRKDIR} where the distribution actually
- # unpacks to. (Default: ${WRKDIR}/${DISTNAME} unless
- # NO_WRKSUBDIR is set, in which case simply ${WRKDIR}).
- # DISTNAME - Name of port or distribution.
# DISTFILES - Name(s) of archive file(s) containing distribution
! # (default: ${DISTNAME}${EXTRACT_SUFX}).
# PATCHFILES - Name(s) of additional files that contain distribution
# patches (default: none). make will look for them at
! # PATCH_SITES (see above). They will automatically be
# uncompressed before patching if the names end with
# ".gz" or ".Z".
# DIST_SUBDIR - Suffix to ${DISTDIR}. If set, all ${DISTFILES}
# and ${PATCHFILES} will be put in this subdirectory of
! # ${DISTDIR}. Also they will be fetched in this subdirectory
! # from FreeBSD mirror sites.
# ALLFILES - All of ${DISTFILES} and ${PATCHFILES}.
# IGNOREFILES - If some of the ${ALLFILES} are not checksum-able, set
# this variable to their names.
- # PKGNAME - Name of the package file to create if the DISTNAME
- # isn't really relevant for the port/package
- # (default: ${DISTNAME}).
# EXTRACT_ONLY - If defined, a subset of ${DISTFILES} you want to
# actually extract.
- # PATCHDIR - A directory containing any additional patches you made
- # to port this software to FreeBSD (default:
- # ${.CURDIR}/patches)
- # SCRIPTDIR - A directory containing any auxiliary scripts
- # (default: ${.CURDIR}/scripts)
- # FILESDIR - A directory containing any miscellaneous additional files.
- # (default: ${.CURDIR}/files)
- # PKGDIR - A direction containing any package creation files.
- # (default: ${.CURDIR}/pkg)
- # PKG_DBDIR - Where package installation is recorded (default: /var/db/pkg)
- # FORCE_PKG_REGISTER - If set, it will overwrite any existing package
- # registration information in ${PKG_DBDIR}/${PKGNAME}.
- # NO_MTREE - If set, will not invoke mtree from bsd.port.mk from
- # the "install" target.
- # MTREE_FILE - The name of the mtree file (default: /etc/mtree/BSD.x11.dist
- # if USE_X_PREFIX is set, /etc/mtree/BSD.local.dist
- # otherwise.)
#
! # NO_BUILD - Use a dummy (do-nothing) build target.
! # NO_CDROM - Port may not go on CDROM. Set this string to reason.
! # NO_DESCRIBE - Use a dummy (do-nothing) describe target.
! # NO_EXTRACT - Use a dummy (do-nothing) extract target.
! # NO_INSTALL - Use a dummy (do-nothing) install target.
! # NO_PACKAGE - Use a dummy (do-nothing) package target.
! # NO_LATEST_LINK - Do not install the "Latest" link for package. Define this
! # if this port is a beta version of another stable port
! # which is also in the tree.
! # NO_PKG_REGISTER - Don't register a port install as a package.
! # NO_WRKSUBDIR - Assume port unpacks directly into ${WRKDIR}.
! # NO_WRKDIR - There's no work directory at all; port does this someplace
! # else.
! # NO_DEPENDS - Don't verify build of dependencies.
! # BROKEN - Port is broken. Set this string to the reason why.
! # RESTRICTED - Port is restricted. Set this string to the reason why.
# USE_GMAKE - Says that the port uses gmake.
# USE_AUTOCONF - Says that the port uses autoconf. Implies GNU_CONFIGURE.
# USE_PERL5 - Says that the port uses perl5 for building and running.
# USE_IMAKE - Says that the port uses imake. Implies USE_X_PREFIX.
! # USE_X_PREFIX - Says that the port installs in ${X11BASE}. Implies USE_XLIB.
! # USE_XLIB - Says that the port uses X libraries.
# NO_INSTALL_MANPAGES - For imake ports that don't like the install.man
# target.
! # HAS_CONFIGURE - Says that the port has its own configure script.
! # GNU_CONFIGURE - Set if you are using GNU configure (optional).
! # CONFIGURE_SCRIPT - Name of configure script, defaults to 'configure'.
! # CONFIGURE_ARGS - Pass these args to configure if ${HAS_CONFIGURE} is set.
! # CONFIGURE_ENV - Pass these env (shell-like) to configure if
! # ${HAS_CONFIGURE} is set.
! # SCRIPTS_ENV - Additional environment vars passed to scripts in
! # ${SCRIPTDIR} executed by bsd.port.mk.
! # MAKE_ENV - Additional environment vars passed to sub-make in build
! # stage.
! # IS_INTERACTIVE - Set this if your port needs to interact with the user
! # during a build. User can then decide to skip this port by
! # setting ${BATCH}, or compiling only the interactive ports
! # by setting ${INTERACTIVE}.
! # FETCH_DEPENDS - A list of "path:dir" pairs of other ports this
# package depends in the "fetch" stage. "path" is the
# name of a file if it starts with a slash (/), an
# executable otherwise. make will test for the
# existence (if it is a full pathname) or search for
# it in your $PATH (if it is an executable) and go
# into "dir" to do a "make all install" if it's not
! # found.
! # BUILD_DEPENDS - A list of "path:dir" pairs of other ports this
# package depends to build (between the "extract" and
# "build" stages, inclusive). The test done to
# determine the existence of the dependency is the
! # same as FETCH_DEPENDS.
! # RUN_DEPENDS - A list of "path:dir" pairs of other ports this
# package depends to run. The test done to determine
# the existence of the dependency is the same as
# FETCH_DEPENDS. This will be checked during the
# "install" stage and the name of the dependency will
! # be put into the package as well.
! # LIB_DEPENDS - A list of "lib:dir" pairs of other ports this package
! # depends on. "lib" is the name of a shared library.
# make will use "ldconfig -r" to search for the
# library. Note that lib can be any regular expression,
# and you need two backslashes in front of dots (.) to
# supress its special meaning (e.g., use
# "foo\\.2\\.:${PORTSDIR}/utils/foo" to match "libfoo.2.*").
! # DEPENDS - A list of other ports this package depends on being
! # made first. Use this for things that don't fall into
! # the above two categories.
! # EXTRACT_CMD - Command for extracting archive (default: tar).
! # EXTRACT_SUFX - Suffix for archive names (default: .tar.gz).
! # EXTRACT_BEFORE_ARGS -
! # Arguments to ${EXTRACT_CMD} before filename
! # (default: -xzf).
! # EXTRACT_AFTER_ARGS -
! # Arguments to ${EXTRACT_CMD} following filename
! # (default: none).
#
! # FETCH_CMD - Full path to ftp/http fetch command if not in $PATH
! # (default: /usr/bin/fetch).
! # FETCH_BEFORE_ARGS -
! # Arguments to ${FETCH_CMD} before filename (default: none).
! # FETCH_AFTER_ARGS -
! # Arguments to ${FETCH_CMD} following filename (default: none).
#
# Motif support:
#
# REQUIRES_MOTIF - Set this in your port if it requires Motif. It will be
--- 11,198 ----
# There are two different types of "maintainers" in the whole ports
# framework concept. Maintainers of the bsd.port*.mk files
! # are listed below in the ${OPSYS}_MAINTAINER entries (this file
# is used by multiple *BSD flavors). You should consult them directly
# if you have any questions/suggestions regarding this file since only
# they are allowed to modify the master copies in the CVS repository!
+ FreeBSD_MAINTAINER= asami@FreeBSD.ORG
+ OpenBSD_MAINTAINER= imp@OpenBSD.ORG
+
# For each port, the MAINTAINER variable is what you should consult for
# contact information on the person(s) to contact if you have questions/
# suggestions about that specific port. By default (if no MAINTAINER
# is listed), a port is maintained by the subscribers of the ports@freebsd.org
# mailing list, and any correspondece should be directed there.
#
! # MAINTAINER - The e-mail address of the contact person for this port
! # (default: ports@FreeBSD.ORG).
#
! # These are meta-variables that are automatically set to the system
! # you are running on.
#
# ARCH - The architecture, as returned by "uname -m".
# OPSYS - Portability clause. This is the operating system the
# makefile is being used on. Automatically set to
# "FreeBSD," "NetBSD," or "OpenBSD" as appropriate.
# OSREL - The release version (numeric) of the operating system.
#
! # These variables are used to identify your port.
! #
! # DISTNAME - Name of port or distribution.
! # PKGNAME - Name of the package file to create if the DISTNAME
! # isn't really relevant for the port/package
! # (default: ${DISTNAME}).
# CATEGORIES - A list of descriptive categories into which this port falls.
#
! # These variable describe how to fetch files required for building the port.
#
# DISTFILES - Name(s) of archive file(s) containing distribution
! # (default: ${DISTNAME}${EXTRACT_SUFX}). Set this to
! # an empty string if the port doesn't require it.
! # EXTRACT_SUFX - Suffix for archive names (default: .tar.gz). You
! # never have to set both DISTFILES and EXTRACT_SUFX.
! # MASTER_SITES - Primary location(s) for distribution files if not found
! # locally.
# PATCHFILES - Name(s) of additional files that contain distribution
# patches (default: none). make will look for them at
! # PATCH_SITES (see below). They will automatically be
# uncompressed before patching if the names end with
# ".gz" or ".Z".
+ # PATCH_SITES - Primary location(s) for distribution patch files
+ # if not found locally.
# DIST_SUBDIR - Suffix to ${DISTDIR}. If set, all ${DISTFILES}
# and ${PATCHFILES} will be put in this subdirectory of
! # ${DISTDIR} (see below). Also they will be fetched in
! # this subdirectory from FreeBSD mirror sites.
# ALLFILES - All of ${DISTFILES} and ${PATCHFILES}.
# IGNOREFILES - If some of the ${ALLFILES} are not checksum-able, set
# this variable to their names.
# EXTRACT_ONLY - If defined, a subset of ${DISTFILES} you want to
# actually extract.
#
! # These three variables are typically set in /etc/make.conf to indicate
! # the user's preferred location to fetch files from.
! #
! # MASTER_SITE_BACKUP - Backup location(s) for distribution files and patch
! # files if not found locally and ${MASTER_SITES}/${PATCH_SITES}
! # (default:
! # ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/${DIST_SUBDIR}/)
! # MASTER_SITE_OVERRIDE - If set, override the MASTER_SITES setting with this
! # value.
! # MASTER_SITE_FREEBSD - If set, only use ${MASTER_SITE_BACKUP} for
! # MASTER_SITES.
! #
! # Set these if your port should not be built under certain circumstances.
! # These are string variables; you should set them to the reason why
! # they are restricted.
! #
! # RESTRICTED - Port is restricted (e.g., contains cryptography, etc.).
! # NO_CDROM - Port may not go on CDROM.
! # NO_PACKAGE - Port should not be packaged but distfiles can be put on
! # ftp sites and CDROMs.
! # BROKEN - Port is broken.
! #
! # This variable is a boolean, so you don't need to set it to the reason.
! #
! # IS_INTERACTIVE - Set this if your port needs to interact with the user
! # during a build. User can then decide to skip this port by
! # setting ${BATCH}, or compiling only the interactive ports
! # by setting ${INTERACTIVE}.
! #
! # Use these if your port uses some of the common software packages.
! #
# USE_GMAKE - Says that the port uses gmake.
+ # GMAKE - Set to path of GNU make if not in $PATH (default: gmake).
# USE_AUTOCONF - Says that the port uses autoconf. Implies GNU_CONFIGURE.
+ # AUTOCONF - Set to path of GNU autoconf if not in $PATH (default:
+ # autoconf).
# USE_PERL5 - Says that the port uses perl5 for building and running.
+ # PERL_VERSION - Full version of perl5 (see below for current value).
+ # PERL_VER - Short version of perl5 (see below for current value).
# USE_IMAKE - Says that the port uses imake. Implies USE_X_PREFIX.
! # XMKMF - Set to path of `xmkmf' if not in $PATH (default: xmkmf -a ).
# NO_INSTALL_MANPAGES - For imake ports that don't like the install.man
# target.
! # USE_X_PREFIX - Says that the port installs in ${X11BASE}. Implies USE_XLIB.
! # USE_XLIB - Says that the port uses X libraries.
! # USE_QT - Says that the port uses the latest version of qt toolkit.
! #
! # Dependency checking. Use these if your port requires another port
! # not in the list above.
! #
! # FETCH_DEPENDS - A list of "path:dir[:target]" tuples of other ports this
# package depends in the "fetch" stage. "path" is the
# name of a file if it starts with a slash (/), an
# executable otherwise. make will test for the
# existence (if it is a full pathname) or search for
# it in your $PATH (if it is an executable) and go
# into "dir" to do a "make all install" if it's not
! # found. If the third field ("target") exists, it will
! # be used instead of ${DEPENDS_TARGET}.
! # BUILD_DEPENDS - A list of "path:dir[:target]" tuples of other ports this
# package depends to build (between the "extract" and
# "build" stages, inclusive). The test done to
# determine the existence of the dependency is the
! # same as FETCH_DEPENDS. If the third field ("target")
! # exists, it will be used instead of ${DEPENDS_TARGET}.
! # RUN_DEPENDS - A list of "path:dir[:target]" tuples of other ports this
# package depends to run. The test done to determine
# the existence of the dependency is the same as
# FETCH_DEPENDS. This will be checked during the
# "install" stage and the name of the dependency will
! # be put into the package as well. If the third field
! # ("target") exists, it will be used instead of
! # ${DEPENDS_TARGET}.
! # LIB_DEPENDS - A list of "lib:dir[:target]" tuples of other ports this
! # package depends on. "lib" is the name of a shared library.
# make will use "ldconfig -r" to search for the
# library. Note that lib can be any regular expression,
# and you need two backslashes in front of dots (.) to
# supress its special meaning (e.g., use
# "foo\\.2\\.:${PORTSDIR}/utils/foo" to match "libfoo.2.*").
! # If the third field ("target") exists, it will be used
! # instead of ${DEPENDS_TARGET}.
! # DEPENDS - A list of "dir[:target]" tuples of other ports this
! # package depends on being made first. Use this only for
! # things that don't fall into the above four categories.
! # If the second field ("target") exists, it will be used
! # instead of ${DEPENDS_TARGET}.
! # DEPENDS_TARGET - The default target to execute when a port is calling a
! # dependency (default: "install").
#
! # Various directory definitions and variables to control them.
! # You rarely need to redefine any of these except WRKSRC and NO_WRKSUBDIR.
#
+ # X11BASE - Where X11 ports install things (default: /usr/X11R6).
+ # LOCALBASE - Where non-X11 ports install things (default: /usr/local).
+ # PREFIX - Where *this* port installs its files (default: ${X11BASE}
+ # if USE_X_PREFIX is set, otherwise ${LOCALBASE}).
+ # PORTSDIR - The root of the ports tree. Defaults:
+ # FreeBSD/OpenBSD: /usr/ports
+ # NetBSD: /usr/opt
+ # DISTDIR - Where to get gzip'd, tarballed copies of original sources
+ # (default: ${PORTSDIR}/distfiles).
+ # PACKAGES - A top level directory where all packages go (rather than
+ # going locally to each port). (default: ${PORTSDIR}/packages).
+ # WRKDIR - A temporary working directory that gets *clobbered* on clean
+ # (default: ${.CURDIR}/work).
+ # WRKSRC - A subdirectory of ${WRKDIR} where the distribution actually
+ # unpacks to. (Default: ${WRKDIR}/${DISTNAME} unless
+ # NO_WRKSUBDIR is set, in which case simply ${WRKDIR}).
+ # NO_WRKSUBDIR - Assume port unpacks directly into ${WRKDIR}.
+ # NO_WRKDIR - There's no work directory at all; port does this someplace
+ # else.
+ # PATCHDIR - A directory containing any additional patches you made
+ # to port this software to FreeBSD (default:
+ # ${.CURDIR}/patches)
+ # SCRIPTDIR - A directory containing any auxiliary scripts
+ # (default: ${.CURDIR}/scripts)
+ # FILESDIR - A directory containing any miscellaneous additional files.
+ # (default: ${.CURDIR}/files)
+ # PKGDIR - A direction containing any package creation files.
+ # (default: ${.CURDIR}/pkg)
+ #
# Motif support:
#
# REQUIRES_MOTIF - Set this in your port if it requires Motif. It will be
***************
*** 205,219 ****
# MOTIF_ONLY - If set, build Motif ports only. (Not much use except for
# building packages.)
#
- # Variables to change if you want a special behavior:
- #
- # ECHO_MSG - Used to print all the '===>' style prompts - override this
- # to turn them off (default: /bin/echo).
- # DEPENDS_TARGET - The target to execute when a port is calling a
- # dependency (default: "install").
- # PATCH_DEBUG - If set, print out more information about the patches as
- # it attempts to apply them.
- #
# Variables that serve as convenient "aliases" for your *-install targets.
# Use these like: "${INSTALL_PROGRAM} ${WRKSRC}/prog ${PREFIX}/bin".
#
--- 207,212 ----
***************
*** 222,236 ****
# INSTALL_DATA - A command to install sharable data.
# INSTALL_MAN - A command to install manpages (doesn't compress).
#
! # If your port doesn't automatically compress manpages, set the following.
! # Depending on the setting of NOMANCOMPRESS, the make rules will compress
! # the manpages for you.
#
# MAN<sect> - A list of manpages, categorized by section. For
# example, if your port has "man/man1/foo.1" and
# "man/mann/bar.n", set "MAN1=foo.1" and "MANN=bar.n".
# The available sections chars are "123456789LN".
# MANPREFIX - The directory prefix for ${MAN<sect>} (default: ${PREFIX}).
#
# Default targets and their behaviors:
#
--- 215,236 ----
# INSTALL_DATA - A command to install sharable data.
# INSTALL_MAN - A command to install manpages (doesn't compress).
#
! # Set the following to specify all manpages that your port installs.
! # These manpages will be automatically listed in ${PLIST}. Depending
! # on the setting of NOMANCOMPRESS, the make rules will compress the
! # manpages for you.
#
# MAN<sect> - A list of manpages, categorized by section. For
# example, if your port has "man/man1/foo.1" and
# "man/mann/bar.n", set "MAN1=foo.1" and "MANN=bar.n".
# The available sections chars are "123456789LN".
# MANPREFIX - The directory prefix for ${MAN<sect>} (default: ${PREFIX}).
+ # MAN<sect>PREFIX - If manual pages of some sections install in different
+ # locations than others, use these (default: ${MANPREFIX}).
+ # MANCOMPRESSED - Set this if the manpages are already compressed. It is set
+ # by default if USE_IMAKE is defined.
+ # MANNOTCOMPRESSED - Set this if the manpages are not compressed even though
+ # USE_IMAKE is set.
#
# Default targets and their behaviors:
#
***************
*** 264,269 ****
--- 264,369 ----
#
# NEVER override the "regular" targets unless you want to open
# a major can of worms.
+ #
+ # Set these variables if your port doesn't need some of the steps.
+ # Note that there are no NO_PATCH or NO_CONFIGURE variables becuase
+ # those steps are empty by default. Also, NO_CHECKSUM is a user variable
+ # and is not to be set in a port's Makefile. See above for NO_PACKAGE.
+ #
+ # NO_EXTRACT - Use a dummy (do-nothing) extract target.
+ # NO_BUILD - Use a dummy (do-nothing) build target.
+ # NO_INSTALL - Use a dummy (do-nothing) install target.
+ #
+ # Here are some variables used in various stages.
+ #
+ # For fetch:
+ #
+ # FETCH_CMD - Full path to ftp/http fetch command if not in $PATH
+ # (default: /usr/bin/fetch).
+ # FETCH_BEFORE_ARGS -
+ # Arguments to ${FETCH_CMD} before filename (default: none).
+ # FETCH_AFTER_ARGS -
+ # Arguments to ${FETCH_CMD} following filename (default: none).
+ #
+ # For extract:
+ #
+ # EXTRACT_CMD - Command for extracting archive (default: tar).
+ # EXTRACT_BEFORE_ARGS -
+ # Arguments to ${EXTRACT_CMD} before filename
+ # (default: -xzf).
+ # EXTRACT_AFTER_ARGS -
+ # Arguments to ${EXTRACT_CMD} following filename
+ # (default: none).
+ #
+ # For configure:
+ #
+ # HAS_CONFIGURE - Says that the port has its own configure script. The
+ # configure stage will not do anything if this is not set.
+ # GNU_CONFIGURE - Set if you are using GNU configure (optional). Implies
+ # HAS_CONFIGURE.
+ # CONFIGURE_SCRIPT - Name of configure script (defaults: configure).
+ # CONFIGURE_ARGS - Pass these args to configure if ${HAS_CONFIGURE} is set.
+ # CONFIGURE_ENV - Pass these env (shell-like) to configure if
+ # ${HAS_CONFIGURE} is set.
+ #
+ # For build and install:
+ #
+ # MAKE_ENV - Additional environment vars passed to sub-make in build
+ # and install stages (default: see below).
+ #
+ # For install:
+ #
+ # NO_MTREE - If set, will not invoke mtree from bsd.port.mk from
+ # the "install" target.
+ # MTREE_FILE - The name of the mtree file (default: /etc/mtree/BSD.x11.dist
+ # if USE_X_PREFIX is set, /etc/mtree/BSD.local.dist
+ # otherwise.)
+ # PLIST - Name of the `packing list' file (default: ${PKGDIR}/PLIST).
+ # Change this to ${WRKDIR}/PLIST or something if you
+ # need to write to it. (It is not a good idea for a port
+ # to write to any file outside ${WRKDIR} during a normal
+ # build.)
+ # TMPPLIST - Name of the `packing list' file after processing
+ # (default: ${WRKDIR}/PLIST.mktmp).
+ # PLIST_SUB - List of "variable=value" pair for substitution in ${PLIST}
+ # (default: see below).
+ #
+ # Note that the install target will automatically add manpages (see
+ # above) and also substitute special sequence of characters (delimited
+ # by "%%") as defined in PLIST_SUB to generate ${TMPPLIST}. For
+ # instance, "OSREL=${OSREL}" in PLIST_SUB causes all occurrences of
+ # "%%OSREL%%" in ${PLIST} to be substituted by the value of OSREL.
+ # ${TMPPLIST} is generated between the do-install and post-install
+ # stages. If you are generating the packing list on-the-fly, make
+ # sure it's generated by the end of do-install!
+ #
+ # For package:
+ #
+ # NO_LATEST_LINK - Do not install the "Latest" link for package. Define this
+ # if this port is a beta version of another stable port
+ # which is also in the tree.
+ #
+ # This is used in all stages:
+ #
+ # SCRIPTS_ENV - Additional environment vars passed to scripts in
+ # ${SCRIPTDIR} executed by bsd.port.mk (default: see below).
+ #
+ # Finally, variables to change if you want a special behavior. These
+ # are for debugging purposes. Don't set them in your Makefile.
+ #
+ # ECHO_MSG - Used to print all the '===>' style prompts - override this
+ # to turn them off (default: /bin/echo).
+ # PATCH_DEBUG - If set, print out more information about the patches as
+ # it attempts to apply them.
+ # PKG_DBDIR - Where package installation is recorded (default: /var/db/pkg)
+ # NO_PKG_REGISTER - Don't register a port install as a package.
+ # FORCE_PKG_REGISTER - If set, it will overwrite any existing package
+ # registration information in ${PKG_DBDIR}/${PKGNAME}.
+ # NO_DEPENDS - Don't verify build of dependencies.
+ # NO_CHECKSUM - Don't verify the checksum. Typically used when
+ # when you noticed the distfile you just fetched has
+ # a different checksum and you intend to verify if
+ # the port still works with it.
# Get the architecture
ARCH!= uname -m
***************
*** 353,359 ****
.endif
.if defined(USE_IMAKE)
! USE_X_PREFIX= yes
.endif
.if defined(USE_X_PREFIX)
USE_XLIB= yes
--- 453,462 ----
.endif
.if defined(USE_IMAKE)
! USE_X_PREFIX= yes
! .if ${OPSYS} != "OpenBSD" && !defined(NO_INSTALL_MANPAGES) && !defined(MANNOTCOMPRESSED)
! MANCOMPRESSED= yes
! .endif
.endif
.if defined(USE_X_PREFIX)
USE_XLIB= yes
***************
*** 424,430 ****
MAKE_FLAGS?= -f
MAKEFILE?= Makefile
! MAKE_ENV+= PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} X11BASE=${X11BASE} MOTIFLIB="${MOTIFLIB}" CFLAGS="${CFLAGS}"
.if exists(/usr/bin/fetch)
FETCH_CMD?= /usr/bin/fetch
--- 527,533 ----
MAKE_FLAGS?= -f
MAKEFILE?= Makefile
! MAKE_ENV+= PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} X11BASE=${X11BASE} MOTIFLIB="${MOTIFLIB}" CFLAGS="${CFLAGS}" LIBDIR="${LIBDIR}"
.if exists(/usr/bin/fetch)
FETCH_CMD?= /usr/bin/fetch
***************
*** 1121,1127 ****
.if !target(do-package)
do-package:
! @if [ -e ${PLIST} ]; then \
${ECHO_MSG} "===> Building package for ${PKGNAME}"; \
if [ -d ${PACKAGES} ]; then \
if [ ! -d ${PKGREPOSITORY} ]; then \
--- 1224,1230 ----
.if !target(do-package)
do-package:
! @if [ -e ${TMPPLIST} ]; then \
${ECHO_MSG} "===> Building package for ${PKGNAME}"; \
if [ -d ${PACKAGES} ]; then \
if [ ! -d ${PKGREPOSITORY} ]; then \
***************
*** 1229,1247 ****
fi
.endif
.endif
- .if (make(real-install) || make(real-package)) && exists(${PLIST})
- @>${TMPPLIST}
- .for man in ${__MANPAGES}
- @${ECHO} ${man} >> ${TMPPLIST}
- .endfor
- @${SED} ${_sedsubplist} ${PLIST} >> ${TMPPLIST}
- .endif
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} ${.TARGET:S/^real-/pre-/}
@if [ -f ${SCRIPTDIR}/${.TARGET:S/^real-/pre-/} ]; then \
cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
${SCRIPTDIR}/${.TARGET:S/^real-/pre-/}; \
fi
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} ${.TARGET:S/^real-/do-/}
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} ${.TARGET:S/^real-/post-/}
@if [ -f ${SCRIPTDIR}/${.TARGET:S/^real-/post-/} ]; then \
cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
--- 1332,1347 ----
fi
.endif
.endif
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} ${.TARGET:S/^real-/pre-/}
@if [ -f ${SCRIPTDIR}/${.TARGET:S/^real-/pre-/} ]; then \
cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
${SCRIPTDIR}/${.TARGET:S/^real-/pre-/}; \
fi
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} ${.TARGET:S/^real-/do-/}
+ # put here so ports can change the contents of ${TMPPLIST} if necessary
+ .if make(real-install)
+ @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} generate-plist
+ .endif
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} ${.TARGET:S/^real-/post-/}
@if [ -f ${SCRIPTDIR}/${.TARGET:S/^real-/post-/} ]; then \
cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
***************
*** 1536,1542 ****
if [ -d $$dir ]; then \
(cd $$dir ; ${MAKE} package-name package-depends); \
else \
! ${ECHO_MSG} "Warning: \"$$dir\" non-existent -- @pkgdep registration incomplete" >&2; \
fi; \
done
.endif
--- 1636,1642 ----
if [ -d $$dir ]; then \
(cd $$dir ; ${MAKE} package-name package-depends); \
else \
! ${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \
fi; \
done
.endif
***************
*** 1706,1712 ****
.if !target(depends-list)
depends-list:
@for dir in `${ECHO} "${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS}" | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u` `${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u`; do \
! (cd $$dir; ${MAKE} package-name depends-list); \
done
.endif
--- 1806,1816 ----
.if !target(depends-list)
depends-list:
@for dir in `${ECHO} "${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS}" | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u` `${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u`; do \
! if [ -d $$dir ]; then \
! (cd $$dir ; ${MAKE} package-name depends-list); \
! else \
! ${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \
! fi; \
done
.endif
***************
*** 1788,1800 ****
.endif
.endif
# Fake installation of package so that user can pkg_delete it later.
# Also, make sure that an installed port is recognized correctly in
# accordance to the @pkgdep directive in the packing lists
.if !target(fake-pkg)
fake-pkg:
- @if [ ! -f ${TMPPLIST} -o ! -f ${COMMENT} -o ! -f ${DESCR} ]; then ${ECHO} "** Missing package files for ${PKGNAME} - installation not recorded."; exit 1; fi
@if [ ! -d ${PKG_DBDIR} ]; then ${RM} -f ${PKG_DBDIR}; ${MKDIR} ${PKG_DBDIR}; fi
.if defined(FORCE_PKG_REGISTER)
@${RM} -rf ${PKG_DBDIR}/${PKGNAME}
--- 1892,1916 ----
.endif
.endif
+ # Generate packing list. Also tests to make sure all required package
+ # files exist.
+
+ .if !target(generate-plist)
+ generate-plist:
+ @if [ ! -f ${PLIST} -o ! -f ${COMMENT} -o ! -f ${DESCR} ]; then ${ECHO} "** Missing package files for ${PKGNAME}."; exit 1; fi
+ @>${TMPPLIST}
+ .for man in ${__MANPAGES}
+ @${ECHO} ${man} >> ${TMPPLIST}
+ .endfor
+ @${SED} ${_sedsubplist} ${PLIST} >> ${TMPPLIST}
+ .endif
+
# Fake installation of package so that user can pkg_delete it later.
# Also, make sure that an installed port is recognized correctly in
# accordance to the @pkgdep directive in the packing lists
.if !target(fake-pkg)
fake-pkg:
@if [ ! -d ${PKG_DBDIR} ]; then ${RM} -f ${PKG_DBDIR}; ${MKDIR} ${PKG_DBDIR}; fi
.if defined(FORCE_PKG_REGISTER)
@${RM} -rf ${PKG_DBDIR}/${PKGNAME}
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-ports" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199808221304.GAA14421>