Date: Fri, 19 Dec 1997 15:14:46 -0700 From: Warner Losh <imp@village.org> To: hackers@freebsd.org Subject: crash help Message-ID: <199712192214.PAA00275@harmony.village.org>
next in thread | raw e-mail | index | archive | help
I have an odd crash that I need some help tracking down.
I have a PPro with a built in aic7880, ide controller, etc. today for
the first time I put an ide drive into the machine. since I wanted to
see what on it (and hopefully to mount it and do a make install).
when I did an fsck on the drive, it fixed a few problems and then it
paniced. so i tried it again, and got an identical panic. I'm
running
uname -a
FreeBSD harmony.village.org 3.0-CURRENT
FreeBSD 3.0-CURRENT #0: Sun Dec 14 16:50:40 MST 1997
imp@harmony.village.org:/home/imp/FreeBSD/src/sys/compile/HARMONY
i386
these sources were checked out just before the build from my cvs tree
here that is updated via ctm.
does this crash look familiar to anybody? any ideas where to go from
here? Thanks for any help you might be able to give me. I can
provide additional inforation if that is needed.
Warner
sudo gdb -k /var/crash/*.0
GDB is free software and you are welcome to distribute copies of it
under certain conditions; type "show copying" to see the conditions.
There is absolutely no warranty for GDB; type "show warranty" for details.
GDB 4.16 (i386-unknown-freebsd),
Copyright 1996 Free Software Foundation, Inc...(no debugging symbols found)...
IdlePTD 26d000
current pcb at 2446fc
panic: unknown/reserved trap
#0 0xf011544f in boot ()
(kgdb) where
#0 0xf011544f in boot ()
#1 0xf011571e in panic ()
#2 0xf01dba3e in trap_fatal ()
#3 0xf01db25a in trap ()
#4 0xf021e95b in wdstart ()
#5 0xf021e2c2 in wdstrategy ()
#6 0xf0113232 in physio ()
#7 0xf01133aa in rawwrite ()
#8 0xf013e61b in spec_write ()
#9 0xf01bad0d in ufsspec_write ()
#10 0xf01bb211 in ufs_vnoperatespec ()
#11 0xf01386f7 in vn_write ()
#12 0xf011ce4b in write ()
#13 0xf01dbcc3 in syscall ()
#14 0x28c25 in ?? ()
#15 0xa6d6 in ?? ()
#16 0xa848 in ?? ()
#17 0x4657 in ?? ()
#18 0x3dc1 in ?? ()
#19 0x107d in ?? ()
% dmesg
Copyright (c) 1992-1997 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.0-CURRENT #0: Sun Dec 14 16:50:40 MST 1997
imp@harmony.village.org:/home/imp/FreeBSD/src/sys/compile/HARMONY
CPU: Pentium Pro (199.43-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x617 Stepping=7
Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV>
real memory = 67108864 (65536K bytes)
avail memory = 62410752 (60948K bytes)
Probing for devices on PCI bus 0:
Correcting Natoma config for non-SMP
chip0: <Intel 82440FX (Natoma) PCI and memory controller> rev 0x02 on pci0.0.0
chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0
ide_pci0: <Intel PIIX3 Bus-master IDE controller> rev 0x00 on pci0.7.1
ahc0: <Adaptec 2940 Ultra SCSI host adapter> rev 0x00 int a irq 10 on pci0.16.0
ahc0: aic7880 Wide Channel, SCSI Id=7, 16/255 SCBs
ahc0: waiting for scsi devices to settle
scbus0 at ahc0 bus 0
ahc0:A:0: refuses WIDE negotiation. Using 8bit transfers
ahc0: target 0 Tagged Queuing Device
sd0 at scbus0 target 0 lun 0
sd0: <QUANTUM FIREBALL_TM3200S 300N> type 0 fixed SCSI 2
sd0: Direct-Access 3067MB (6281856 512 byte sectors)
ahc0:A:1: refuses WIDE negotiation. Using 8bit transfers
ahc0: target 1 Tagged Queuing Device
sd1 at scbus0 target 1 lun 0
sd1: <iomega jaz 1GB G.60> type 0 removable SCSI 2
sd1: Direct-Access
sd1: ILLEGAL REQUEST asc:24,0 Invalid field in CDB
sd1 could not mode sense (4). Using ficticious geometry
1021MB (2091050 512 byte sectors)
de0: <Digital 21041 Ethernet> rev 0x11 int a irq 9 on pci0.18.0
de0: 21041 [10Mb/s] pass 1.1
de0: address 00:c0:f0:14:e1:b4
vga0: <S3 ViRGE graphics accelerator> rev 0x06 int a irq 11 on pci0.19.0
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
fe0 not found at 0x300
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
lpt1 not found
mse0 not found at 0x23c
psm0 not found at 0x60
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 not found at 0x1f0
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (wd2): <Maxtor 7340 AT>
wd2: 329MB (675450 sectors), 790 cyls, 15 heads, 57 S/T, 512 B/S
bt0 not found at 0x330
uha0 not found at 0x330
aha0 not found at 0x330
aic0 at 0x340-0x35f irq 11 on isa
aic0: waiting for scsi devices to settle
scbus1 at aic0 bus 0
nca0 not found at 0x1f88
nca1 not probed due to I/O address conflict with aic0 at 0x350
sea0 not found
wt0 not found at 0x300
mcd0 not found at 0x300
matcdc0 not found at 0x230
scd0 not found at 0x230
ie0: unknown board_id: f000
ie0 not found at 0x300
ep0 not found at 0x300
ex0 not found
le0 not found at 0x300
lnc0 not found at 0x280
npx0 on motherboard
npx0: INT 16 interface
de0: enabling 10baseT port
Initializing PC-card drivers: aic ed ep fe sio
changing root device to sd0a
WARNING: / was not properly dismounted.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199712192214.PAA00275>