Date: Sun, 28 Aug 2005 20:59:19 +1200 From: Mark Kirkwood <markir@paradise.net.nz> To: freebsd-smp@freebsd.org Subject: Re: 6.0 BETA3 reboot hangs on SMP system if BIOS USB disabled Message-ID: <43117CE7.9040703@paradise.net.nz> In-Reply-To: <431125D9.2090401@paradise.net.nz> References: <431125D9.2090401@paradise.net.nz>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------040409010908060104000808
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Sorry - I attached the wrong dmesg (same machine, but running 5.4 doh!)
FWIW here are two dmesg, one with usb disabled (from 3 Aug, so is still
BETA2) and one with usb enabled (from 24 Aug).
Mark Kirkwood wrote:
> I had previously posted something very similar to -current with BETA2,
> but received no replies. Also the SMP factor might make this more
> appropriate here :-)
>
> Tyan S2510 dual PIII 6.0-BETA3 (dmesg attached for case with USB disabled):
>
--------------040409010908060104000808
Content-Type: text/plain;
name="dmesg.nousb"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="dmesg.nousb"
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-BETA2 #0: Wed Aug 3 08:22:24 UTC 2005
root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (996.85-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 2147483648 (2048 MB)
avail memory = 2096541696 (1999 MB)
MPTable: <AMI CNB30LE >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Assuming intbase of 0
ioapic1: Assuming intbase of 16
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
cpu1 on motherboard
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: <display, VGA> at device 1.0 (no driver attached)
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xd400-0xd43f mem 0xfeafe000-0xfeafefff,0xfe900000-0xfe9fffff irq 20 at device 4.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:e0:81:02:4c:6a
fxp1: <Intel 82559 Pro/100 Ethernet> port 0xd000-0xd03f mem 0xfeafd000-0xfeafdfff,0xfe700000-0xfe7fffff irq 21 at device 5.0 on pci0
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: Ethernet address: 00:e0:81:02:4c:6b
isab0: <PCI-ISA bridge> port 0x580-0x58f at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 15.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xfffff000-0xffffffff at device 15.2 on pci0
pcib0: unable to route slot 15 INTA
ohci0: Could not allocate irq
device_attach: ohci0 attach returned 6
pcib1: <MPTable Host-PCI bridge> pcibus 1 on motherboard
pci1: <PCI bus> on pcib1
atapci1: <Promise PDC20271 UDMA133 controller> port 0xefe0-0xefe7,0xefac-0xefaf,0xefa0-0xefa7,0xefa8-0xefab,0xef90-0xef9f mem 0xfebf0000-0xfebfffff irq 27 at device 2.0 on pci1
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xd17ff,0xd1800-0xd27ff,0xd2800-0xd37ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
Timecounters tick every 1.000 msec
acd0: CDRW <CREATIVE CD-RW RW8439E/1R09> at ata0-master PIO4
ad4: 39205MB <Maxtor 6E040L0 NAR61HA0> at ata2-master UDMA133
ad5: 39205MB <Maxtor 6E040L0 NAR61HA0> at ata2-slave UDMA133
ad6: 39205MB <Maxtor 6E040L0 NAR61590> at ata3-master UDMA133
ad7: 39205MB <Maxtor 6E040L0 NAR61590> at ata3-slave UDMA133
ATA PseudoRAID loaded
ar0: 156822MB <Promise Fasttrak RAID0 (stripe 256 KB)> status: READY
ar0: disk0 READY using ad4 at ata2-master
ar0: disk1 READY using ad6 at ata3-master
ar0: disk2 READY using ad5 at ata2-slave
ar0: disk3 READY using ad7 at ata3-slave
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ar0s2a
lock order reversal
1st 0xc097b240 UMA lock (UMA lock) @ /usr/src/sys/vm/uma_core.c:1494
2nd 0xc1060144 system map (system map) @ /usr/src/sys/vm/vm_map.c:2317
KDB: stack backtrace:
kdb_backtrace(0,ffffffff,c0930358,c0930498,c08bace4) at kdb_backtrace+0x29
witness_checkorder(c1060144,9,c08714b6,90d) at witness_checkorder+0x564
_mtx_lock_flags(c1060144,0,c08714b6,90d) at _mtx_lock_flags+0x5b
_vm_map_lock(c10600c0,c08714b6,90d) at _vm_map_lock+0x26
vm_map_remove(c10600c0,c365b000,c365c000,e6a40c08,c077ee01) at vm_map_remove+0x1f
kmem_free(c10600c0,c365b000,1000,e6a40c38,c077e7ae) at kmem_free+0x25
page_free(c365b000,1000,2) at page_free+0x29
zone_drain(c104a780) at zone_drain+0x26a
zone_foreach(c077e544,e6a40cec,c079062f,c354a300,e6a40c74) at zone_foreach+0x37
uma_reclaim(c354a300,e6a40c74,0,c0926980,e6a40c80) at uma_reclaim+0x12
vm_pageout_scan(0,c097b6a0,0,c08729a3,5c3) at vm_pageout_scan+0x103
vm_pageout(0,e6a40d38,0,c07913e8,0) at vm_pageout+0x2c3
fork_exit(c07913e8,0,e6a40d38) at fork_exit+0xa0
fork_trampoline() at fork_trampoline+0x8
--- trap 0x1, eip = 0, esp = 0xe6a40d6c, ebp = 0 ---
--------------040409010908060104000808
Content-Type: text/plain;
name="dmesg"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="dmesg"
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-BETA3 #4: Wed Aug 24 21:05:50 NZST 2005
postgres@ikker.markir.net:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (996.85-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 2147483648 (2048 MB)
avail memory = 2096541696 (1999 MB)
MPTable: <AMI CNB30LE >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Assuming intbase of 0
ioapic1: Assuming intbase of 16
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
cpu1 on motherboard
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: <display, VGA> at device 1.0 (no driver attached)
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xd400-0xd43f mem 0xfeafe000-0xfeafefff,0xfe900000-0xfe9fffff irq 20 at device 4.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:e0:81:02:4c:6a
fxp1: <Intel 82559 Pro/100 Ethernet> port 0xd000-0xd03f mem 0xfeafd000-0xfeafdfff,0xfe700000-0xfe7fffff irq 21 at device 5.0 on pci0
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: Ethernet address: 00:e0:81:02:4c:6b
isab0: <PCI-ISA bridge> port 0x580-0x58f at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 15.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xfeafc000-0xfeafcfff irq 10 at device 15.2 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib1: <MPTable Host-PCI bridge> pcibus 1 on motherboard
pci1: <PCI bus> on pcib1
atapci1: <Promise PDC20271 UDMA133 controller> port 0xefe0-0xefe7,0xefac-0xefaf,0xefa0-0xefa7,0xefa8-0xefab,0xef90-0xef9f mem 0xfebf0000-0xfebfffff irq 27 at device 2.0 on pci1
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xd17ff,0xd1800-0xd27ff,0xd2800-0xd37ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
Timecounters tick every 1.000 msec
acd0: CDRW <CREATIVE CD-RW RW8439E/1R09> at ata0-master PIO4
ad4: 39205MB <Maxtor 6E040L0 NAR61HA0> at ata2-master UDMA133
ad5: 39205MB <Maxtor 6E040L0 NAR61HA0> at ata2-slave UDMA133
ad6: 39205MB <Maxtor 6E040L0 NAR61590> at ata3-master UDMA133
ad7: 39205MB <Maxtor 6E040L0 NAR61590> at ata3-slave UDMA133
ar0: 156822MB <Promise Fasttrak RAID0 (stripe 256 KB)> status: READY
ar0: disk0 READY using ad4 at ata2-master
ar0: disk1 READY using ad6 at ata3-master
ar0: disk2 READY using ad5 at ata2-slave
ar0: disk3 READY using ad7 at ata3-slave
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ar0s2a
--------------040409010908060104000808--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?43117CE7.9040703>