Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 28 Sep 1999 22:52:47 +0200 (MEST)
From:      Sverrir Valgeirsson <sverre@hacke.esek.lth.se>
To:        Kenneth Wayne Culver <culverk@wam.umd.edu>
Cc:        freebsd-questions@freebsd.org
Subject:   Re: Soundproblem
Message-ID:  <Pine.LNX.4.10.9909282245100.11441-100000@hacke.esek.lth.se>
In-Reply-To: <Pine.GSO.4.10.9909281639500.8222-100000@rac10.wam.umd.edu>

next in thread | previous in thread | raw e-mail | index | archive | help
> > I'm wondering if that "NOTE! SB Pro support required with your soundcard!"
> > is trying to tell me that I've forgotten something, but what?
> > 
> What is in your kernel config file? What kind of soundcard (exactly) is
> it? what is the whole output of dmesg? Answer that and I'll be able to
> help.

In my config file:
controller pnp0
controller snd0
device sb0 at isa? port 0x220 irq 5 drq 1 vector sbintr
device sbmidi0  at isa? port 0x330
device opl0     at isa? port 0x388

My soundcard is an SB16 compatible. I can't be more excact (could call the
store were I got my machine though, if it's needed).
  
dmesg gives:

Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California. All rights reserved.
FreeBSD 3.3-STABLE #6: Tue Sep 28 21:46:41 CEST 1999
    sverre@h55e407.delphi.afb.lu.se:/usr/src/sys/compile/SIMBA
Timecounter "i8254"  frequency 1193182 Hz
CPU: AMD-K6(tm) 3D processor (300.68-MHz 586-class CPU)
  Origin = "AuthenticAMD"  Id = 0x580  Stepping = 0
  Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
  AMD Features=0x80000800<SYSCALL,3DNow!>
real memory  = 201326592 (196608K bytes)
avail memory = 193347584 (188816K bytes)
Probing for devices on PCI bus 0:
chip0: <AcerLabs M1541 (Aladdin-V) PCI host bridge> rev 0x04 on pci0.0.0
chip1: <AcerLabs M5243 PCI-PCI bridge> rev 0x04 on pci0.1.0
chip2: <AcerLabs M1533 portable PCI-ISA bridge> rev 0xc3 on pci0.7.0
ed1: <NE2000 PCI Ethernet (RealTek 8029)> rev 0x00 int a irq 10 on
pci0.14.0
ed1: address 00:00:1c:00:e2:eb, type NE2000 (16 bit) 
ide_pci0: <Acer Aladdin IV/V (M5229) Bus-master IDE controller> rev 0xc1
int a i
rq 0 on pci0.15.0
Probing for devices on PCI bus 1:
vga0: <Matrox model 0521 graphics accelerator> rev 0x01 int a irq 11 on
pci1.0.0
Probing for PnP devices:
CSN 1 Vendor ID: ALS0110 [0x10019305] Serial 0xffffffff Comp ID: @@@0000
[0x0000
0000]
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model Generic PS/2 mouse, device ID 0
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <ST33232A>
wd0: 3077MB (6303024 sectors), 6253 cyls, 16 heads, 63 S/T, 512 B/S
wdc0: unit 1 (atapi): <ATAPI CDROM/V110B>, removable, accel, dma, iordy
wdc0: ATAPI CD-ROMs not configured
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (wd2): <ST31720A>
wd2: 1626MB (3331440 sectors), 3305 cyls, 16 heads, 63 S/T, 512 B/S
wdc1: unit 1 (wd3): <FUJITSU MPC3064AT>
wd3: 6187MB (12672450 sectors), 13410 cyls, 15 heads, 63 S/T, 512 B/S
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
sb0 at 0x220 irq 5 drq 1 on isa

NOTE! SB Pro support required with your soundcard!
snd0: <SoundBlaster 16 4.2> 
sbmidi0 not found at 0x330
opl0 at 0x388 on isa
snd0: <Yamaha OPL3 FM> 
changing root device to wd2s1a
cmd xmms pid 292 tried to use non-present sched_getscheduler
wd2: interrupt timeout (status 58<rdy,seekdone,drq> error 0)
wd2: wdtimeout() DMA status 4
wd2: interrupt timeout (status 58<rdy,seekdone,drq> error 1<no_dam>)
wd2: wdtimeout() DMA status 4
ed1: promiscuous mode enabled

greetings
/sverre




To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.10.9909282245100.11441-100000>