Date: Thu, 05 Sep 2002 15:06:30 +0900 (JST) From: Mitsuru IWASAKI <iwasaki@jp.FreeBSD.org> To: martin@gneto.com Cc: current@FreeBSD.ORG, acpi-jp@jp.freebsd.org Subject: acpica-unix-20020829 patches (was Re: Lots of ACPI errors when booting yesterdays CURRENT Message-ID: <20020905.150630.78701116.iwasaki@jp.FreeBSD.org> In-Reply-To: <3D75BB51.4020305@gneto.com> References: <3D75BB51.4020305@gneto.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, > Below is a trimmed dmesg from booting yesterdays CURRENT on my = > SuperMicro P3TDE6 machine (RCC/ServerWorks HE-SLt chipset). > I heven't found anything wrong with the OS, it is just that the boot = > seems to be a bit on the chatty side :-) > Is this caused by a bad BIOS setting or is there something strange wi= th = > this board/BIOS or the acpi support in CURRENT? > I also noticed support for four acpi_cpu:s is, this as intended, the = > board only have room for two? Please try the latest version acpica-unix-20020829, patches for FreeBSD at: http://people.freebsd.org/~iwasaki/acpi/acpica-20020815-20020829-test20= 020905.diff Hopefully some of the problems will be solved. From=20CHANGES.txt ---- If the target of a Scope() operator already exists, it must be an object type that actually opens a scope -- such as a Device, Method, Scope, etc. This is a fatal runtime error. Similar error check has been added to the iASL compiler also. Tightened up the namespace load to disallow multiple names in the same scope. This previously was allowed if both objects were of the same type. (i.e., a lookup was the same as entering a new name). ---- Thanks > Copyright (c) 1992-2002 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1= 994 > The Regents of the University of California. All rights reserved. > FreeBSD 5.0-CURRENT #0: Tue Sep 3 17:41:10 CEST 2002 > root@euklides.gneto.com:/usr/obj/ext/FreeBSD/CURRENT/sys/EUKLIDE= S > Preloaded elf kernel "/boot/kernel/kernel" at 0xc04c7000. > Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04c70a8. > Timecounter "i8254" frequency 1193182 Hz > Timecounter "TSC" frequency 1266068553 Hz > CPU: Pentium III/Pentium III Xeon/Celeron (1266.07-MHz 686-class CPU)= > Origin =3D "GenuineIntel" Id =3D 0x6b1 Stepping =3D 1 > = > Features=3D0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR= ,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> > real memory =3D 536805376 (524224K bytes) > avail memory =3D 515674112 (503588K bytes) > Pentium Pro MTRR support enabled > Using $PIR table, 10 entries at 0xc00f52e0 > ACPI-0536: *** Error: Field name [INDX] already exists in curren= t scope > ACPI-0536: *** Error: Field name [DATA] already exists in curren= t scope > ACPI-0536: *** Error: Field name [INDX] already exists in curren= t scope > ACPI-0536: *** Error: Field name [DATA] already exists in curren= t scope > ACPI-0536: *** Error: Field name [C000] already exists in curren= t scope > ACPI-0536: *** Error: Field name [C010] already exists in curren= t scope > ACPI-0536: *** Error: Field name [C020] already exists in curren= t scope > ACPI-0685: *** Warning: NsLookup: INDX, type 1, checking for typ= e 11 > ACPI-0685: *** Warning: NsLookup: DATA, type 2, checking for typ= e 11 > ACPI-0685: *** Warning: NsLookup: INDX, type 1, checking for typ= e 11 > ACPI-0685: *** Warning: NsLookup: DATA, type 2, checking for typ= e 11 > ACPI-0685: *** Warning: NsLookup: C000, type 8, checking for typ= e 13 > ACPI-0685: *** Warning: NsLookup: C010, type 8, checking for typ= e 13 > ACPI-0685: *** Warning: NsLookup: C020, type 8, checking for typ= e 13 > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <RCC RCCNILE > on motherboard > ACPI-1354: *** Error: Method execution failed, AE_NOT_FOUND > ACPI-1354: *** Error: Method execution failed, AE_NOT_FOUND > ACPI-1354: *** Error: Method execution failed, AE_NOT_FOUND > ACPI-1354: *** Error: Method execution failed, AE_NOT_FOUND > ACPI-1354: *** Error: Method execution failed, AE_NOT_FOUND > ACPI-1354: *** Error: Method execution failed, AE_NOT_FOUND > ACPI-1354: *** Error: Method execution failed, AE_NOT_FOUND > ACPI-1354: *** Error: Method execution failed, AE_NOT_FOUND > acpi0: power button is handled as a fixed feature programming model. > Timecounter "ACPI-safe" frequency 3579545 Hz > ACPI-1354: *** Error: Method execution failed, AE_NOT_FOUND > --- 15 identical lines removed > acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0 > acpi_cpu0: <CPU> on acpi0 > acpi_cpu1: <CPU> on acpi0 > acpi_cpu2: <CPU> on acpi0 > acpi_cpu3: <CPU> on acpi0 > acpi_button0: <Sleep Button> on acpi0 > pcib1: <ACPI Host-PCI bridge> on acpi0 > pci0: <ACPI PCI bus> on pcib1 > pcib3: <ACPI PCI-PCI bridge> at device 0.1 on pci0 > pci1: <ACPI PCI bus> on pcib3 > pci1: <display, VGA> at device 0.0 (no driver attached) > nge0: <National Semiconductor Gigabit Ethernet> port 0xde00-0xdeff me= m = > 0xfeadb000-0xfeadbfff irq 11 at device 1.0 on pci0 > nge0: Ethernet address: 00:40:33:af:35:33 > miibus0: <MII bus> on nge0 > nsgphy0: <DP83861 10/100/1000 media interface> on miibus0 > nsgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, = > 1000baseT-FDX, auto > pci0: <network, ethernet> at device 2.0 (no driver attached) > pcm0: <AudioPCI ES1370> port 0xdf00-0xdf3f irq 11 at device 3.0 on pc= i0 > ahc_pci0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd000-0xd0ff = mem = > 0xfeadc000-0xfeadcfff irq 5 at device 5.0 on pci0 > aic7899: Ultra160 Wide Channel A, SCSI Id=3D7, 32/253 SCBs > ahc_pci1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd800-0xd8ff = mem = > 0xfeadf000-0xfeadffff irq 10 at device 5.1 on pci0 > aic7899: Ultra160 Wide Channel B, SCSI Id=3D7, 32/253 SCBs > fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xd400-0xd43f mem = > 0xfe900000-0xfe9fffff,0xfeadd000-0xfeaddfff irq 9 at device 6.0 on pc= i0 > fxp0: Ethernet address 00:30:48:23:0e:af > inphy0: <i82555 10/100 media interface> on miibus1 > inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > isab0: <PCI-ISA bridge> port 0x580-0x58f at device 15.0 on pci0 > isa0: <ISA bus> on isab0 > pci0: <mass storage, ATA> at device 15.1 (no driver attached) > pci0: <serial bus, USB> at device 15.2 (no driver attached) > pcib4: <ACPI Host-PCI bridge> on acpi0 > pcib4: duplicate bus number 0 - not probing bus > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: model IntelliMouse, device ID 3 > ACPI-1354: *** Error: Method execution failed, AE_NOT_FOUND > --- 13 identical lines removed > fdc0: cmd 3 failed at out byte 1 of 3 > ACPI-1354: *** Error: Method execution failed, AE_NOT_FOUND > --- 170 identical lines removed > fdc0: cmd 3 failed at out byte 1 of 3 > ACPI-1354: *** Error: Method execution failed, AE_NOT_FOUND > --- 155 identical lines removed > pcib2: <ServerWorks host to PCI bridge> at pcibus 2 on motherboard > pci2: <PCI bus> on pcib2 > em0: <Intel(R) PRO/1000 Network Connection, Version - 1.3.14> port = > 0xef80-0xef9f mem 0xfebc0000-0xfebdffff,0xfebe0000-0xfebfffff irq 11 = at = > device 2.0 on pci2 > em0: Speed:1000 Mbps Duplex:Full > orm0: <Option ROMs> at iomem 0xd1800-0xd27ff,0xc0000-0xc87ff on isa0 > fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> at port= = > 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > pmtimer0 on isa0 > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 > ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/8 bytes threshold > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=3D0x300> > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > sio1: type 16550A > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on = isa0 > Timecounters tick every 10.000 msec > Waiting 15 seconds for SCSI devices to settle > acpi_cpu: CPU throttling enabled, 16 steps from 100% to 6.2% > da0 at ahc0 bus 0 target 0 lun 0 > da0: <QUANTUM ATLAS10K3_36_SCA 020W> Fixed Direct Access SCSI-3 devic= e > da0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged = > Queueing Enabled > da0: 35074MB (71833096 512 byte sectors: 255H 63S/T 4471C) > Mounting root from ufs:/dev/da0s4a > cd0 at ahc1 bus 0 target 2 lun 0 > cd0: <TEAC CD-ROM CD-532S 3.0A> Removable CD-ROM SCSI-2 device > cd0: 20.000MB/s transfers (20.000MHz, offset 16) > cd0: Attempt to query device size failed: NOT READY, Medium not prese= nt > ohci0: <OHCI (generic) USB controller> mem 0xfeade000-0xfeadefff irq = 10 = > at device 15.2 on pci0 > usb0: OHCI version 1.0, legacy support > usb0: <OHCI (generic) USB controller> on ohci0 > usb0: USB revision 1.0 > uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 4 ports with 4 removable, self powered > = > -- = > Martin Nilsson - Home:<martin@gneto.com> Work:<martin@svenskabutiker.= se> > UNIX & Webb programmer/architect Malm=F6, Sweden > FreeBSD - The power to serve. http://www.FreeBSD.org > = > = > = > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-current" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020905.150630.78701116.iwasaki>