Skip site navigation (1)Skip section navigation (2)
Date:      14 Jan 2003 16:26:14 +1100
From:      Mark Sergeant <msergeant@snsonline.net>
To:        Marc Butler <marcbutler@timing.com>
Cc:        freebsd-current@FreeBSD.ORG, freebsd-mobile@FreeBSD.ORG
Subject:   Re: USB problems after resume from suspend in current as of January 9
Message-ID:  <1042521974.1252.5.camel@xyzzy.wireless.snsonline.net>
In-Reply-To: <20030113152834.A32346@timing.com>
References:  <1042161742.1021.2.camel@xyzzy.wireless.snsonline.net> <20030113152834.A32346@timing.com>

next in thread | previous in thread | raw e-mail | index | archive | help
on resume with a usbdevs -v I get ...

Controller /dev/usb0:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
AcerLabs(0x0000), rev 1.00
 port 1 addr 2: low speed, power 100 mA, config 1, USB Mouse(0xc00c),
Logitech(0x046d), rev 6.20
 port 2 powered
 port 3 powered

Regardless of whether the mouse is plugged in or not. I also tried
plugging in an intellimouse explorer & a usb keyboard, both of which
failed to work, neither were powered up at all. 

I should note that under 4.7 suspend and resume works fine. I tried to
kill and restart usbd but no luck.  So for now I'm stuck with shutting
down the system.

Cheers,

Mark

On Tue, 2003-01-14 at 09:28, Marc Butler wrote:
> On Fri, Jan 10, 2003 at 12:22:22PM +1100, Mark Sergeant wrote:
> > I'm running a toshiba portege 4000 with -CURRENT as of January 9.
> > Suspending and resuming runs fine apart from USB, on resume it is unable
> > to recognise my USB mouse (logitech), nothing even registers that it is
> > plugged in, nor does the mouse get any power yet on booting normally USB
> > works fine. Has anyone got any ideas how I can work around this issues ?
> 
> It may be the USB controller is being shutdown and not restarted.  To
> check whether the USB controller is up try: "usbdevs -v" which I
> believe should complain: "no USB controllers found" or similar.
> 
> You may want to check the BIOS for any obvious settings related to
> USB and power management.
> 
> Is ACPI involved in suspension?  I'm sorry but I know nothing about
> ACPI (or laptop power management).
-- 
Mark Sergeant <msergeant@snsonline.net>
SNSOnline Technical Services.

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1042521974.1252.5.camel>