Date: Tue, 26 Oct 2010 21:33:41 -0400 (EDT) From: "Michael L. Squires" <mikes@siralan.org> To: freebsd-scsi@freebsd.org Subject: Tyan S4881/SCSI/FreeBSD 7.x Message-ID: <20101025120535.W1326@familysquires.net> In-Reply-To: <649630C24D5E884F85DD13645FE903A7640B244F@wtl-exch-2.sandvine.com> References: <649630C24D5E884F85DD13645FE903A7640B244F@wtl-exch-2.sandvine.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Is anyone out there using a Tyan S4881 (quad Opteron with 2 PCI-Express
slots, not the S4882 with only PCI-X and PCI slots)?
I have a system running 7.3-STABLE (see below) with an LSI 300-8X (PCI-X
with 8 750GB Seagate ES drives) but I'm unable to add a SCSI controller to
any slot.
Any attempt to add a SCSI card gets the following error (example is with
an LSI 53C1010-66 66Mhz PCI-X in a slot set at 66MHz by jumper). I've
tried a PCI-E card (PERC4e/DC BIOS H430, configures correctly) with the
same error but different device (OE) number. I don't see anything obvious
in the BIOS configuration pages>
I did see one error message (since lost) that indicated the PCI-X slot was
hardwired to an IRQ that did not match the one selected by the SCSI card,
but there is no obvious way to change either IRQ.
BIOS error message:
System Configuration Data updated
ERROR
Warning: IRQ not configured - PCI Mass Storage Controller in slot 03 Bus:11, Device:03, Function:00
LSI 53C1010-66
(I also have two systems with S4882 boards, no such problems; I'm about to
replace the S4881 with a spare S4882).
dmesg:
FreeBSD 7.3-STABLE #10: Fri Sep 24 14:46:43 EDT 2010
root@superxeon.familysquires.net:/usr/obj/usr/src/sys/OPTERON8 amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Dual Core AMD Opteron(tm) Processor 875 (2210.20-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x20f10 Family = f Model = 21 Stepping
= 0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C
MOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!>
AMD Features2=0x3<LAHF,CMP>
Cores per package: 2
usable memory = 18492895232 (17636 MB)
avail memory = 17794420736 (16970 MB)
ACPI APIC Table: <PTLTD APIC >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
dmesg output for sym0 controller (tape drive, Overland library with two
Sony AIT-3 drives, is not found:
sym0: <1010-66> port 0x3000-0x30ff mem 0xd0142000-0xd01423ff,0xd0140000-0xd0141f
ff at device 3.0 on pci17
sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: handling phase mismatch from SCRIPTS.
sym0: [ITHREAD]
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20101025120535.W1326>