Date: Tue, 21 Sep 2004 01:03:21 -0400 From: Marc Ramirez <marc.ramirez@bluecirclesoft.com> To: "M. Warner Losh" <imp@bsdimp.com> Cc: current@freebsd.org Subject: Re: PCMCIA problems w/ 5.3 BETA 4 Message-ID: <200409210103.30531.marc.ramirez@bluecirclesoft.com> In-Reply-To: <20040919.120549.05621523.imp@bsdimp.com> References: <200409182240.54337.marc.ramirez@bluecirclesoft.com> <20040919.120549.05621523.imp@bsdimp.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--nextPart1273273.2Bj7iac2FZ Content-Type: multipart/mixed; boundary="Boundary-01=_cY7TBgheIKlyxH4" Content-Transfer-Encoding: 7bit Content-Disposition: inline --Boundary-01=_cY7TBgheIKlyxH4 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline On Sunday 19 September 2004 02:05 pm, you wrote: > Can you post the pciconf -l as well as a 4.10 dmesg if you have one? I completely missed the OLDCARD config. It seems to work with no problems.= =20 Here are the two files from 4.10. If you want to test any code, feel free = to=20 e-mail me. Thanks for your time! Marc. =2D-=20 Marc Ramirez Blue Circle Software Corporation 513-688-1070 (main) 513-382-1270 (direct) http://www.bluecirclesoft.com http://www.mrami.com (personal) --Boundary-01=_cY7TBgheIKlyxH4 Content-Type: text/plain; charset="iso-8859-1"; name="dmesg.output.4.10" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="dmesg.output.4.10" Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. =46reeBSD 4.10-RELEASE #0: Tue May 25 22:52:21 GMT 2004 root@perseus.cse.buffalo.edu:/usr/obj/usr/src/sys/BOOTMFS Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 1594836428 Hz CPU: Mobile Intel(R) Celeron(R) CPU 1.60GHz (1594.84-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0xf27 Stepping =3D 7 Features=3D0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA= ,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> real memory =3D 268238848 (261952K bytes) config> intro \^[[m\^[[H\^[[J\^[[3;26H\^[[m\^[[1m\^[[m\^[[6;11H\^[[m\^[[7m\^[[m\^[[7;11H\= ^[[m\^[[8;11H\^[[m\^[[11;3H\^[[m\^[[12;3H\^[[m\^[[13;3H\^[[m\^[[15;3H\^[[m\= ^[[16;3H\^[[m\^[[18;3H\^[[m\^[[19;3H\^[[m\^[[21;3H\^[[m\^[[7m\^[[m\^[[22;3H= \^[[m\^[[1;1H\^[[6;11H\^[[m\^[[7;11H\^[[m\^[[7m\^[[m\^[[8;11H\^[[m\^[[1;1H\= ^[[6;11H\^[[m\^[[7m\^[[m\^[[7;11H\^[[m\^[[8;11H\^[[m\^[[1;1H\^[[m\^[[H\^[[J= avail memory =3D 252792832 (246868K bytes) Preloaded elf kernel "kernel" at 0xc0829000. Preloaded mfs_root "/mfsroot" at 0xc0829084. Warning: Pentium 4 CPU: PSE disabled Pentium Pro MTRR support enabled md0: Preloaded image </mfsroot> 4423680 bytes at 0xc03ef3d4 md1: Malloc disk Using $PIR table, 8 entries at 0xc00f01a0 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82845 Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <Intel 82845 PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <NVidia model 0175 graphics accelerator> at 0.0 irq 10 uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0xefe0-0xefff i= rq 11 at device 29.0 on pci0 usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0xef80-0xef9f i= rq 11 at device 29.1 on pci0 usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered pcib2: <PCI to PCI bridge (vendor=3D8086 device=3D2448)> at device 30.0 on = pci0 pci2: <PCI bus> on pcib2 fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0xdf40-0xdf7f mem 0x= fceff000-0xfcefffff irq 11 at device 8.0 on pci2 fxp0: Ethernet address 00:08:0d:05:70:0b inphy0: <i82562ET 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <PCI to ISA bridge (vendor=3D8086 device=3D248c)> at device 31.0 on = pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 ATA100 controller> port 0xcfa0-0xcfaf,0xcfe4-0xcfe7,0x= cfe8-0xcfef,0xcff4-0xcff7,0xcff8-0xcfff irq 11 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <unknown card> (vendor=3D0x8086, dev=3D0x2485) at 31.5 irq 11 pci0: <unknown card> (vendor=3D0x8086, dev=3D0x2486) at 31.6 irq 11 orm0: <Option ROMs> at iomem 0xc0000-0xcffff,0xe0000-0xeffff on isa0 pmtimer0 on isa0 fdc0: ready for input in output fdc0: cmd 3 failed at out byte 1 of 3 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model GlidePoint, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> pcic0: <Intel i82365SL-A/B> at port 0x3e0 iomem 0xd0000 on isa0 pcic0: Polling mode pccard0: <PC Card 16-bit bus (classic)> on pcic0 pccard1: <PC Card 16-bit bus (classic)> on pcic0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/15 bytes threshold plip0: <PLIP network interface> on ppbus0 pccard: card inserted, slot 1 ad0: 19077MB <TOSHIBA MK2018GAS> [38760/16/63] at ata0-master UDMA100 acd0: CD-RW <DW-224E> at ata1-master PIO4 Mounting root from ufs:/dev/md0c fdc0: ready for input in output fdc0: cmd 3 failed at out byte 1 of 3 sio1: configured irq 3 not in bitmap of probed irqs 0 Waiting (max 60 seconds) for system process `vnlru' to stop...stopped Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped Waiting (max 60 seconds) for system process `syncer' to stop...stopped syncing disks... 1=20 done Uptime: 12m9s Rebooting... Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. =46reeBSD 4.10-RELEASE #0: Tue May 25 22:52:21 GMT 2004 root@perseus.cse.buffalo.edu:/usr/obj/usr/src/sys/BOOTMFS Calibrating clock(s) ... TSC clock: 1594799912 Hz, i8254 clock: 1193162 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method Timecounter "TSC" frequency 1594835720 Hz CPU: Mobile Intel(R) Celeron(R) CPU 1.60GHz (1594.84-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0xf27 Stepping =3D 7 Features=3D0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA= ,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> real memory =3D 268238848 (261952K bytes) Physical memory chunk(s): 0x000001000 - 0x00009efff, 647168 bytes (158 pages) 0x000850000 - 0x00ffc7fff, 259489792 bytes (63352 pages) config> intro \^[[m\^[[H\^[[J\^[[3;26H\^[[m\^[[1m\^[[m\^[[6;11H\^[[m\^[[7m\^[[m\^[[7;11H\= ^[[m\^[[8;11H\^[[m\^[[11;3H\^[[m\^[[12;3H\^[[m\^[[13;3H\^[[m\^[[15;3H\^[[m\= ^[[16;3H\^[[m\^[[18;3H\^[[m\^[[19;3H\^[[m\^[[21;3H\^[[m\^[[7m\^[[m\^[[22;3H= \^[[m\^[[1;1H\^[[m\^[[H\^[[Javail memory =3D 252792832 (246868K bytes) bios32: Found BIOS32 Service Directory header at 0xc00f0240 bios32: Entry =3D 0xfc04c (c00fc04c) Rev =3D 0 Len =3D 1 pcibios: PCI BIOS entry at 0xd4df pnpbios: Found PnP BIOS data at 0xc00f0440 pnpbios: Entry =3D f0000:9138 Rev =3D 1.0 pnpbios: Event flag at 510 pnpbios: OEM ID 1938f351 Other BIOS signatures found: ACPI: 000f0180 Preloaded elf kernel "kernel" at 0xc0829000. Preloaded mfs_root "/mfsroot" at 0xc0829090. Warning: Pentium 4 CPU: PSE disabled Pentium Pro MTRR support enabled md0: Preloaded image </mfsroot> 4423680 bytes at 0xc03ef3d4 Creating DISK md0 Creating DISK md1 md1: Malloc disk Math emulator present pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=3D0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there (id=3D1a308086) Using $PIR table, 8 entries at 0xc00f01a0 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82845 Host to PCI bridge> on motherboard found-> vendor=3D0x8086, dev=3D0x1a30, revid=3D0x05 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 map[10]: type 1, range 32, base f0000000, size 27 found-> vendor=3D0x8086, dev=3D0x1a31, revid=3D0x05 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 subordinatebus=3D1 secondarybus=3D1 found-> vendor=3D0x8086, dev=3D0x2482, revid=3D0x02 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1 subordinatebus=3D0 secondarybus=3D0 intpin=3Da, irq=3D11 map[20]: type 1, range 32, base 0000efe0, size 5 found-> vendor=3D0x8086, dev=3D0x2484, revid=3D0x02 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 intpin=3Db, irq=3D11 map[20]: type 1, range 32, base 0000ef80, size 5 found-> vendor=3D0x8086, dev=3D0x2448, revid=3D0x42 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 subordinatebus=3D5 secondarybus=3D2 found-> vendor=3D0x8086, dev=3D0x248c, revid=3D0x02 class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1 subordinatebus=3D0 secondarybus=3D0 found-> vendor=3D0x8086, dev=3D0x248a, revid=3D0x02 class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 intpin=3Da, irq=3D11 map[10]: type 3, range 32, base 0000cff8, size 3 map[14]: type 1, range 32, base 0000cff4, size 2 map[18]: type 3, range 32, base 0000cfe8, size 3 map[1c]: type 1, range 32, base 0000cfe4, size 2 map[20]: type 1, range 32, base 0000cfa0, size 4 found-> vendor=3D0x8086, dev=3D0x2485, revid=3D0x02 class=3D04-01-00, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 intpin=3Db, irq=3D11 map[10]: type 1, range 32, base 0000ce00, size 8 map[14]: type 1, range 32, base 0000cdc0, size 6 found-> vendor=3D0x8086, dev=3D0x2486, revid=3D0x02 class=3D07-03-00, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 intpin=3Db, irq=3D11 map[10]: type 1, range 32, base 0000ca00, size 8 map[14]: type 1, range 32, base 0000c980, size 7 pci0: <PCI bus> on pcib0 pcib1: <Intel 82845 PCI-PCI (AGP) bridge> at device 1.0 on pci0 found-> vendor=3D0x10de, dev=3D0x0175, revid=3D0xa3 class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 intpin=3Da, irq=3D10 map[10]: type 1, range 32, base fd000000, size 24 map[14]: type 1, range 32, base ec000000, size 26 map[18]: type 1, range 32, base ebf80000, size 19 pci1: <PCI bus> on pcib1 pci1: <NVidia model 0175 graphics accelerator> (vendor=3D0x10de, dev=3D0x01= 75) at 0.0 irq 10 uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0xefe0-0xefff i= rq 11 at device 29.0 on pci0 usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0xef80-0xef9f i= rq 11 at device 29.1 on pci0 using shared irq11. usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered pcib2: <PCI to PCI bridge (vendor=3D8086 device=3D2448)> at device 30.0 on = pci0 found-> vendor=3D0x8086, dev=3D0x1031, revid=3D0x42 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 intpin=3Da, irq=3D11 map[10]: type 1, range 32, base fceff000, size 12 map[14]: type 1, range 32, base 0000df40, size 6 pci2: <PCI bus> on pcib2 fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0xdf40-0xdf7f mem 0x= fceff000-0xfcefffff irq 11 at device 8.0 on pci2 fxp0: using memory space register mapping fxp0: Ethernet address 00:08:0d:05:70:0b fxp0: PCI IDs: 8086 1031 1179 0001 0042 fxp0: Dynamic Standby mode is disabled inphy0: <i82562ET 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: fxp0 attached isab0: <PCI to ISA bridge (vendor=3D8086 device=3D248c)> at device 31.0 on = pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 ATA100 controller> port 0xcfa0-0xcfaf,0xcfe4-0xcfe7,0x= cfe8-0xcfef,0xcff4-0xcff7,0xcff8-0xcfff irq 11 at device 31.1 on pci0 ata0: iobase=3D0x01f0 altiobase=3D0x03f6 bmaddr=3D0xcfa0 ata0: mask=3D03 ostat0=3D50 ostat2=3D00 ata0-master: ATAPI 00 00 ata0-slave: ATAPI 00 00 ata0: mask=3D03 stat0=3D50 stat1=3D00 ata0-master: ATA 01 a5 ata0: devices=3D01 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=3D0x0170 altiobase=3D0x0376 bmaddr=3D0xcfa8 ata1: mask=3D03 ostat0=3D50 ostat2=3D00 ata1-master: ATAPI 14 eb ata1-slave: ATAPI 00 00 ata1: mask=3D03 stat0=3D00 stat1=3D00 ata1: devices=3D04 ata1: at 0x170 irq 15 on atapci0 pci0: <unknown card> (vendor=3D0x8086, dev=3D0x2485) at 31.5 irq 11 pci0: <unknown card> (vendor=3D0x8086, dev=3D0x2486) at 31.6 irq 11 ex_isa_identify() ata-: ata0 exists, using next available unit number ata-: ata1 exists, using next available unit number Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xc0000-0xcffff,0xe0000-0xeffff on isa0 pmtimer0 on isa0 fdc0: ready for input in output fdc0: cmd 3 failed at out byte 1 of 3 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ata2 failed to probe at port 0x1f0 irq 14 on isa0 ata3 failed to probe at port 0x170 irq 15 on isa0 adv0 failed to probe on isa0 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x330 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x334 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x230 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x234 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x130 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x134 bt0 failed to probe at port 0x134-0x137 on isa0 aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0 failed to probe at port 0x134-0x137 on isa0 aic0 failed to probe at port 0x140-0x15f on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model GlidePoint, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k vga0: vga: WARNING: video mode switching is not fully supported on this ada= pter VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80=20 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96=20 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20 VGA parameters in BIOS for mode 24 08 08 08 0f 00 00 00 00 08 08 08 ff 00 00 00 00=20 00 00 00 ff 08 08 08 08 08 08 08 0f 08 08 08 08=20 00 00 00 ff 00 00 00 00 08 08 08 ff 08 08 08 08=20 08 08 0f 08 0f 08 08 08 14 14 14 17 14 14 14 14=20 EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80=20 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96=20 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) pcic0: <Intel i82365SL-A/B> at port 0x3e0 iomem 0xd0000 on isa0 pcic0: Polling mode pccard0: <PC Card 16-bit bus (classic)> on pcic0 pccard1: <PC Card 16-bit bus (classic)> on pcic0 pcic1: not probed (disabled) sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: irq maps: 0x1 0x1 0x1 0x1 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: irq maps: 0x1 0x1 0x1 0x1 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/15 bytes threshold plip0: <PLIP network interface> on ppbus0 bpf: lp0 attached ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) cs0: not probed (disabled) sn0: not probed (disabled) isa_probe_children: probing PnP devices BIOS Geometries: 0:03fffe3f 0..1023=3D1024 cylinders, 0..254=3D255 heads, 1..63=3D63 sectors 0 accounted for Device configuration finished. bpf: lo0 attached bpf: sl0 attached ad0: success setting UDMA5 on Intel chip Creating DISK ad0 pcic0: Power: Vcc=3D0 Vpp=3D0 pcic0: Power applied Power complete. pcic0: Power: Vcc=3D-1 Vpp=3D-1 pcic0: Couldn't autodetect voltage, assuming 5.0V pcic0: Power applied pcic0: Output enabled pcic0: Settling complete Power complete. pccard: card inserted, slot 1 pcic0: reset 1 int is 0 stat is ff ar: FreeBSD check1 failed ad0: <TOSHIBA MK2018GAS/Q2.03 E> ATA-5 disk at ata0-master ad0: 19077MB (39070080 sectors), 38760 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 ad0: piomode=3D4 dmamode=3D2 udmamode=3D5 cblid=3D1 ata1-master: piomode=3D4 dmamode=3D2 udmamode=3D2 dmaflag=3D1 ata1-master: success setting PIO4 on generic chip acd0: <DW-224E/7.0A> CD-RW drive at ata1 as master acd0: read 4134KB/s (34515KB/s) write 1722KB/s (1722KB/s), 1658KB buffer, P= IO4 acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, DVD-RAM, packet acd0: Writes: CD-R, CD-RW, test write acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: CD-RW 120mm data disc Mounting root from ufs:/dev/md0c start_init: trying /sbin/init start_init: trying /sbin/oinit start_init: trying /sbin/init.bak start_init: trying /stand/sysinstall fdc0: ready for input in output fdc0: cmd 3 failed at out byte 1 of 3 aha0: status reg test failed ff sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: irq maps: 0x105 0x105 0x105 0x105 sio1: probe failed test(s): 0 1 2 4 6 7 9 pcic0: reset 2 int is 60 stat is cd pcic0: reset 3 int is 60 stat is ed pccard1: Assigning wi0: io 0x240-0x27f irq 3 flags 0x0 pcic: I/O win 0 flags 15 240-27f pcic: I/O win 0 flags 5 240-27f wi0 at port 0x240-0x27f irq 3 slot 1 on pccard1 pcic: I/O win 0 flags 15 240-27f wi0: 802.11 address: 00:40:05:de:d1:54 wi0: using RF:PRISM2 MAC:HFA3841 CARD:HWB3163-SST-flash wi0: Intersil Firmware: Primary 0.03.00, Station 0.07.06 wi0: wi_has_wep =3D 1 bpf: wi0 attached ad0s1: type 0x7, start 63, end =3D 16787924, size 16787862=20 ad0s1: C/H/S end 1023/10/63 (1031876) !=3D end 16787924: invalid ad0s2: type 0xa5, start 16787925, end =3D 39070079, size 22282155 : OK ad0s1: type 0x7, start 63, end =3D 16787924, size 16787862=20 ad0s1: C/H/S end 1023/10/63 (1031876) !=3D end 16787924: invalid ad0s2: type 0xa5, start 16787925, end =3D 39070079, size 22282155 : OK ad0s1: type 0x7, start 63, end =3D 16787924, size 16787862=20 ad0s1: C/H/S end 1023/10/63 (1031876) !=3D end 16787924: invalid ad0s2: type 0xa5, start 16787925, end =3D 39070079, size 22282155 : OK ad0s1: type 0x7, start 63, end =3D 16787924, size 16787862=20 ad0s1: C/H/S end 1023/10/63 (1031876) !=3D end 16787924: invalid ad0s2: type 0xa5, start 16787925, end =3D 39070079, size 22282155 : OK ad0s1: type 0x7, start 63, end =3D 16787924, size 16787862=20 ad0s1: C/H/S end 1023/10/63 (1031876) !=3D end 16787924: invalid ad0s2: type 0xa5, start 16787925, end =3D 39070079, size 22282155 : OK ad0s1: type 0x7, start 63, end =3D 16787924, size 16787862=20 ad0s1: C/H/S end 1023/10/63 (1031876) !=3D end 16787924: invalid ad0s2: type 0xa5, start 16787925, end =3D 39070079, size 22282155 : OK ad0s1: type 0x7, start 63, end =3D 16787924, size 16787862=20 ad0s1: C/H/S end 1023/10/63 (1031876) !=3D end 16787924: invalid ad0s2: type 0xa5, start 16787925, end =3D 39070079, size 22282155 : OK ad0s1: type 0x7, start 63, end =3D 16787924, size 16787862=20 ad0s1: C/H/S end 1023/10/63 (1031876) !=3D end 16787924: invalid ad0s2: type 0xa5, start 16787925, end =3D 39070079, size 22282155 : OK ad0s1: type 0x7, start 63, end =3D 16787924, size 16787862=20 ad0s1: C/H/S end 1023/10/63 (1031876) !=3D end 16787924: invalid ad0s2: type 0xa5, start 16787925, end =3D 39070079, size 22282155 : OK ad0s1: type 0x7, start 63, end =3D 16787924, size 16787862=20 ad0s1: C/H/S end 1023/10/63 (1031876) !=3D end 16787924: invalid ad0s2: type 0xa5, start 16787925, end =3D 39070079, size 22282155 : OK --Boundary-01=_cY7TBgheIKlyxH4-- --nextPart1273273.2Bj7iac2FZ Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.6 (FreeBSD) iD8DBQBBT7Yig1EgpGw750IRAshEAKCd59uNWetO8L6cI4Vc9p0XHj0lnwCeLWEL 2bXZrCm2NUtazmX6fjSOL8c= =ujc0 -----END PGP SIGNATURE----- --nextPart1273273.2Bj7iac2FZ--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200409210103.30531.marc.ramirez>