Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 9 Jul 2009 12:52:42 -0500
From:      Chris Ruiz <yr.retarded@gmail.com>
To:        Stanislav Sedov <stas@freebsd.org>
Cc:        freebsd-current@freebsd.org
Subject:   Re: no em0 with r195477
Message-ID:  <58c737d70907091052g7a6f962jf87e94974f7e46aa@mail.gmail.com>
In-Reply-To: <20090709153940.4544bfa8.stas@FreeBSD.org>
References:  <58c737d70907082058s4e97223fuc0bdbdfaabc3a0a5@mail.gmail.com> <20090709153940.4544bfa8.stas@FreeBSD.org>

next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Jul 9, 2009 at 6:39 AM, Stanislav Sedov<stas@freebsd.org> wrote:
> On Wed, 8 Jul 2009 22:58:27 -0500
> Chris Ruiz <yr.retarded@gmail.com> mentioned:
>
>> i just upgraded from r194562 to r195477 in order to test BETA1 and my
>> e1000 adapter no longer attaching to the driver.
>>
>> pciconf -lv output
>>
>> em0@pci0:0:25:0: =A0 =A0 =A0 =A0class=3D0x020000 card=3D0x00018086 chip=
=3D0x10bd8086
>> rev=3D0x02 hdr=3D0x00
>> =A0 =A0 vendor =A0 =A0 =3D 'Intel Corporation'
>> =A0 =A0 device =A0 =A0 =3D 'Intel 82566DM Gigabit Ethernet Adapter (8256=
6DM)'
>> =A0 =A0 class =A0 =A0 =A0=3D network
>> =A0 =A0 subclass =A0 =3D ethernet
>>
>> here's a quick list of relevant commits since my last kernel build:
>> r195409, r195168, r195049, r194979, r194925, r194911, r194865.
>>
>
> Hi, Chris!
>
> Can you provide the verbose boot log?

Turns out it's caused by the driver thinking the EEPROM checksum is
invalid.  Here's a verbose dmesg:

Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-BETA1 #0 r195483: Wed Jul  8 21:51:57 CDT 2009
    root@attack.young-alumni.com:/usr/obj/usr/src/sys/FAILWHALE
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80dce000.
Preloaded elf obj module "/boot/kernel/zfs.ko" at 0xffffffff80dce2b0.
Preloaded elf obj module "/boot/kernel/opensolaris.ko" at 0xffffffff80dce95=
8.
Preloaded /boot/zfs/zpool.cache "/boot/zfs/zpool.cache" at 0xffffffff80dcef=
88.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 3001458636 Hz
CPU: Intel(R) Core(TM)2 Duo CPU     E6850  @ 3.00GHz (3001.46-MHz K8-class =
CPU)
  Origin =3D "GenuineIntel"  Id =3D 0x6fb  Stepping =3D 11
  Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=3D0xe3f5<SSE3,DTES64,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDC=
M>
  AMD Features=3D0x20100800<SYSCALL,NX,LM>
  AMD Features2=3D0x1<LAHF>
  TSC: P-state invariant
real memory  =3D 8589934592 (8192 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x0000000000040fff, 262144 bytes (64 pages)
0x0000000000051000 - 0x0000000000099fff, 299008 bytes (73 pages)
0x0000000000e01000 - 0x00000000cdbcbfff, 3437015040 bytes (839115 pages)
0x00000000cdc9a000 - 0x00000000ceec4fff, 19050496 bytes (4651 pages)
0x00000000ceec7000 - 0x00000000cef79fff, 733184 bytes (179 pages)
0x00000000cefe5000 - 0x00000000cefe5fff, 4096 bytes (1 pages)
0x00000000ceff2000 - 0x00000000ceff2fff, 4096 bytes (1 pages)
0x00000000cefff000 - 0x00000000ceffffff, 4096 bytes (1 pages)
0x0000000100000000 - 0x000000021cbf3fff, 4777263104 bytes (1166324 pages)
avail memory =3D 8192516096 (7812 MB)
ACPI APIC Table: <INTEL  DQ3510J >
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
ULE: setup cpu 0
ULE: setup cpu 1
This module (opensolaris) contains code covered by the
Common Development and Distribution License (CDDL)
see http://opensolaris.org/os/licensing/opensolaris_license/
ACPI: RSDP 0xfe020 00014 (v0 INTEL )
ACPI: RSDT 0xceffd038 00070 (v1 INTEL  DQ3510J  000003BA      01000013)
ACPI: FACP 0xceffc000 00074 (v1 INTEL  DQ3510J  000003BA MSFT 01000013)
ACPI: DSDT 0xceff8000 03D6A (v1 INTEL  DQ3510J  000003BA MSFT 01000013)
ACPI: FACS 0xcef87000 00040
ACPI: APIC 0xceff7000 00078 (v1 INTEL  DQ3510J  000003BA MSFT 01000013)
ACPI: WDDT 0xceff6000 00040 (v1 INTEL  DQ3510J  000003BA MSFT 01000013)
ACPI: MCFG 0xceff5000 0003C (v1 INTEL  DQ3510J  000003BA MSFT 01000013)
ACPI: ASF! 0xceff4000 000A6 (v32 INTEL  DQ3510J  000003BA MSFT 01000013)
ACPI: HPET 0xceff3000 00038 (v1 INTEL  DQ3510J  000003BA MSFT 01000013)
ACPI: DMAR 0xceff1000 000F8 (v1 INTEL  DQ3510J  000003BA MSFT 01000013)
ACPI: ASPT 0xceff0000 0002C (v3 INTEL  DQ3510J  000003BA MSFT 01000013)
ACPI: WDTT 0xcefef000 002CC (v1 INTEL  DQ3510J  000003BA MSFT 01000013)
ACPI: SSDT 0xcefee000 00204 (v1 INTEL     CpuPm 000003BA MSFT 01000013)
ACPI: SSDT 0xcefed000 001F9 (v1 INTEL   Cpu0Ist 000003BA MSFT 01000013)
ACPI: SSDT 0xcefec000 001F9 (v1 INTEL   Cpu1Ist 000003BA MSFT 01000013)
ACPI: SSDT 0xcefeb000 001F9 (v1 INTEL   Cpu2Ist 000003BA MSFT 01000013)
ACPI: SSDT 0xcefea000 001F9 (v1 INTEL   Cpu3Ist 000003BA MSFT 01000013)
ACPI: SSDT 0xcefe9000 000DD (v1 INTEL   Cpu0Cst 000003BA MSFT 01000013)
ACPI: SSDT 0xcefe8000 000DD (v1 INTEL   Cpu1Cst 000003BA MSFT 01000013)
ACPI: SSDT 0xcefe7000 000DD (v1 INTEL   Cpu2Cst 000003BA MSFT 01000013)
ACPI: SSDT 0xcefe6000 000DD (v1 INTEL   Cpu3Cst 000003BA MSFT 01000013)
ACPI: TCPA 0xcef7b000 00032 (v2 INTEL  TIANO    00000002 MSFT 01000013)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 2
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
wlan: <802.11 Link Layer>
ichwd module loaded
io: <I/O>
kbd0 at kbdmux0
mem: <memory>
nfslock: pseudo-device
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
acpi0: <INTEL DQ3510J> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xffffff8000011000 pa 0x4000
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.TMEM -> bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.PAMX -> bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC_.PRR0 -> bus 0 dev 31 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC_.PRR1 -> bus 0 dev 31 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC_.IELK.ELR0 -> bus 0 dev 0 func 0
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 7 9 10 11 12
  Validation          0   11   N     0  3 4 5 7 9 10 11 12
  After Disable       0  255   N     0  3 4 5 7 9 10 11 12
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  3 4 5 7 9 10 11 12
  Validation          0   10   N     0  3 4 5 7 9 10 11 12
  After Disable       0  255   N     0  3 4 5 7 9 10 11 12
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    9   N     0  3 4 5 7 9 10 11 12
  Validation          0    9   N     0  3 4 5 7 9 10 11 12
  After Disable       0  255   N     0  3 4 5 7 9 10 11 12
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 7 9 10 11 12
  Validation          0   11   N     0  3 4 5 7 9 10 11 12
  After Disable       0  255   N     0  3 4 5 7 9 10 11 12
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 7 9 10 11 12
  Validation          0   11   N     0  3 4 5 7 9 10 11 12
  After Disable       0  255   N     0  3 4 5 7 9 10 11 12
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    9   N     0  3 4 5 7 9 10 11 12
  Validation          0    9   N     0  3 4 5 7 9 10 11 12
  After Disable       0  255   N     0  3 4 5 7 9 10 11 12
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  3 4 5 7 9 10 11 12
  Validation          0   10   N     0  3 4 5 7 9 10 11 12
  After Disable       0  255   N     0  3 4 5 7 9 10 11 12
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 7 9 10 11 12
  Validation          0   11   N     0  3 4 5 7 9 10 11 12
  After Disable       0  255   N     0  3 4 5 7 9 10 11 12
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acp=
i0
acpi_hpet0: vend: 0x8086 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route 64=
-bit
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=3D0, physical bus=3D0
found->	vendor=3D0x8086, dev=3D0x29b0, revid=3D0x02
	domain=3D0, bus=3D0, slot=3D0, func=3D0
	class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0006, statreg=3D0x2090, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found->	vendor=3D0x8086, dev=3D0x29b2, revid=3D0x02
	domain=3D0, bus=3D0, slot=3D2, func=3D0
	class=3D03-00-00, hdrtype=3D0x00, mfdev=3D1
	cmdreg=3D0x0007, statreg=3D0x0090, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	intpin=3Da, irq=3D11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
	map[10]: type Memory, range 32, base 0xe0380000, size 19, enabled
	map[14]: type I/O Port, range 32, base 0x2458, size  3, enabled
	map[18]: type Prefetchable Memory, range 32, base 0xd0000000, size 28, ena=
bled
	map[1c]: type Memory, range 32, base 0xe0200000, size 20, enabled
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
found->	vendor=3D0x8086, dev=3D0x29b3, revid=3D0x02
	domain=3D0, bus=3D0, slot=3D2, func=3D1
	class=3D03-80-00, hdrtype=3D0x00, mfdev=3D1
	cmdreg=3D0x0007, statreg=3D0x0090, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xe0300000, size 19, enabled
found->	vendor=3D0x8086, dev=3D0x29b4, revid=3D0x02
	domain=3D0, bus=3D0, slot=3D3, func=3D0
	class=3D07-80-00, hdrtype=3D0x00, mfdev=3D1
	cmdreg=3D0x0006, statreg=3D0x0018, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	intpin=3Da, irq=3D11
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xe0427100, size  4, enabled
pcib0: matched entry for 0.3.INTA
pcib0: slot 3 INTA hardwired to IRQ 16
found->	vendor=3D0x8086, dev=3D0x29b6, revid=3D0x02
	domain=3D0, bus=3D0, slot=3D3, func=3D2
	class=3D01-01-85, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0005, statreg=3D0x00b0, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	intpin=3Dc, irq=3D9
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type I/O Port, range 32, base 0x2450, size  3, enabled
	map[14]: type I/O Port, range 32, base 0x246c, size  2, enabled
	map[18]: type I/O Port, range 32, base 0x2448, size  3, enabled
	map[1c]: type I/O Port, range 32, base 0x2468, size  2, enabled
	map[20]: type I/O Port, range 32, base 0x2420, size  4, enabled
pcib0: matched entry for 0.3.INTC
pcib0: slot 3 INTC hardwired to IRQ 18
found->	vendor=3D0x8086, dev=3D0x29b7, revid=3D0x02
	domain=3D0, bus=3D0, slot=3D3, func=3D3
	class=3D07-00-02, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0007, statreg=3D0x00b0, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	intpin=3Db, irq=3D10
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type I/O Port, range 32, base 0x2440, size  3, enabled
	map[14]: type Memory, range 32, base 0xe0425000, size 12, enabled
pcib0: matched entry for 0.3.INTB
pcib0: slot 3 INTB hardwired to IRQ 17
found->	vendor=3D0x8086, dev=3D0x10bd, revid=3D0x02
	domain=3D0, bus=3D0, slot=3D25, func=3D0
	class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0007, statreg=3D0x0010, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	intpin=3Da, irq=3D11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 32, base 0xe0400000, size 17, enabled
	map[14]: type Memory, range 32, base 0xe0424000, size 12, enabled
	map[18]: type I/O Port, range 32, base 0x2400, size  5, enabled
pcib0: matched entry for 0.25.INTA
pcib0: slot 25 INTA hardwired to IRQ 20
found->	vendor=3D0x8086, dev=3D0x2937, revid=3D0x02
	domain=3D0, bus=3D0, slot=3D26, func=3D0
	class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1
	cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	intpin=3Da, irq=3D9
	map[20]: type I/O Port, range 32, base 0x20e0, size  5, enabled
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 18
found->	vendor=3D0x8086, dev=3D0x2938, revid=3D0x02
	domain=3D0, bus=3D0, slot=3D26, func=3D1
	class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	intpin=3Db, irq=3D9
	map[20]: type I/O Port, range 32, base 0x20c0, size  5, enabled
pcib0: matched entry for 0.26.INTB
pcib0: slot 26 INTB hardwired to IRQ 21
found->	vendor=3D0x8086, dev=3D0x2939, revid=3D0x02
	domain=3D0, bus=3D0, slot=3D26, func=3D2
	class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	intpin=3Dc, irq=3D10
	map[20]: type I/O Port, range 32, base 0x20a0, size  5, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 17
found->	vendor=3D0x8086, dev=3D0x293c, revid=3D0x02
	domain=3D0, bus=3D0, slot=3D26, func=3D7
	class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0006, statreg=3D0x0290, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	intpin=3Dc, irq=3D10
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xe0426c00, size 10, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 17
found->	vendor=3D0x8086, dev=3D0x293e, revid=3D0x02
	domain=3D0, bus=3D0, slot=3D27, func=3D0
	class=3D04-03-00, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0006, statreg=3D0x0010, cachelnsz=3D16 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	intpin=3Da, irq=3D10
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xe0420000, size 14, enabled
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 22
found->	vendor=3D0x8086, dev=3D0x2940, revid=3D0x02
	domain=3D0, bus=3D0, slot=3D28, func=3D0
	class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1
	cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D16 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0x00 (0 ns)
	intpin=3Da, irq=3D255
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
found->	vendor=3D0x8086, dev=3D0x2942, revid=3D0x02
	domain=3D0, bus=3D0, slot=3D28, func=3D1
	class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1
	cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D16 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0x00 (0 ns)
	intpin=3Db, irq=3D255
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
found->	vendor=3D0x8086, dev=3D0x2944, revid=3D0x02
	domain=3D0, bus=3D0, slot=3D28, func=3D2
	class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1
	cmdreg=3D0x0007, statreg=3D0x0010, cachelnsz=3D16 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0x00 (0 ns)
	intpin=3Dc, irq=3D255
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
found->	vendor=3D0x8086, dev=3D0x2946, revid=3D0x02
	domain=3D0, bus=3D0, slot=3D28, func=3D3
	class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1
	cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D16 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0x00 (0 ns)
	intpin=3Dd, irq=3D255
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
found->	vendor=3D0x8086, dev=3D0x2948, revid=3D0x02
	domain=3D0, bus=3D0, slot=3D28, func=3D4
	class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1
	cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D16 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0x00 (0 ns)
	intpin=3Da, irq=3D255
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
found->	vendor=3D0x8086, dev=3D0x2934, revid=3D0x02
	domain=3D0, bus=3D0, slot=3D29, func=3D0
	class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1
	cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	intpin=3Da, irq=3D11
	map[20]: type I/O Port, range 32, base 0x2080, size  5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found->	vendor=3D0x8086, dev=3D0x2935, revid=3D0x02
	domain=3D0, bus=3D0, slot=3D29, func=3D1
	class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	intpin=3Db, irq=3D11
	map[20]: type I/O Port, range 32, base 0x2060, size  5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found->	vendor=3D0x8086, dev=3D0x2936, revid=3D0x02
	domain=3D0, bus=3D0, slot=3D29, func=3D2
	class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	intpin=3Dc, irq=3D9
	map[20]: type I/O Port, range 32, base 0x2040, size  5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found->	vendor=3D0x8086, dev=3D0x293a, revid=3D0x02
	domain=3D0, bus=3D0, slot=3D29, func=3D7
	class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0006, statreg=3D0x0290, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	intpin=3Da, irq=3D11
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xe0426800, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found->	vendor=3D0x8086, dev=3D0x244e, revid=3D0x92
	domain=3D0, bus=3D0, slot=3D30, func=3D0
	class=3D06-04-01, hdrtype=3D0x01, mfdev=3D0
	cmdreg=3D0x0107, statreg=3D0x0010, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0x00 (0 ns)
found->	vendor=3D0x8086, dev=3D0x2914, revid=3D0x02
	domain=3D0, bus=3D0, slot=3D31, func=3D0
	class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1
	cmdreg=3D0x0107, statreg=3D0x0210, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found->	vendor=3D0x8086, dev=3D0x2922, revid=3D0x02
	domain=3D0, bus=3D0, slot=3D31, func=3D2
	class=3D01-06-01, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0007, statreg=3D0x02b0, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	intpin=3Da, irq=3D9
	powerspec 3  supports D0 D3  current D0
	MSI supports 16 messages
	map[10]: type I/O Port, range 32, base 0x2438, size  3, enabled
	map[14]: type I/O Port, range 32, base 0x2464, size  2, enabled
	map[18]: type I/O Port, range 32, base 0x2430, size  3, enabled
	map[1c]: type I/O Port, range 32, base 0x2460, size  2, enabled
	map[20]: type I/O Port, range 32, base 0x2020, size  5, enabled
	map[24]: type Memory, range 32, base 0xe0426000, size 11, enabled
pcib0: matched entry for 0.31.INTA
pcib0: slot 31 INTA hardwired to IRQ 21
found->	vendor=3D0x8086, dev=3D0x2930, revid=3D0x02
	domain=3D0, bus=3D0, slot=3D31, func=3D3
	class=3D0c-05-00, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0003, statreg=3D0x0280, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	intpin=3Db, irq=3D9
	map[10]: type Memory, range 64, base 0xe0427000, size  8, enabled
	map[20]: type I/O Port, range 32, base 0x2000, size  5, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 18
vgapci0: <VGA-compatible display> port 0x2458-0x245f mem
0xe0380000-0xe03fffff,0xd0000000-0xdfffffff,0xe0200000-0xe02fffff irq
16 at device 2.0 on pci0
agp0: <Intel Q35 SVGA controller> on vgapci0
vgapci0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xd0000000
vgapci0: Reserved 0x80000 bytes for rid 0x10 type 3 at 0xe0380000
vgapci0: Reserved 0x100000 bytes for rid 0x1c type 3 at 0xe0200000
agp0: detected 6140k stolen memory
agp0: aperture size is 256M
vgapci1: <VGA-compatible display> mem 0xe0300000-0xe037ffff at device
2.1 on pci0
pci0: <simple comms> at device 3.0 (no driver attached)
atapci0: <Intel ATA controller> port
0x2450-0x2457,0x246c-0x246f,0x2448-0x244f,0x2468-0x246b,0x2420-0x242f
irq 18 at device 3.2 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x2420
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 49
atapci0: [MPSAFE]
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x2450
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0x246c
ata2: reset tp1 mask=3D03 ostat0=3D7f ostat1=3D7f
ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f
ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f
ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f
ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f
ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f
ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f
ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f
ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f
ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f
ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f
ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f
ata2: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f
ata2: stat1=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f
ata2: reset tp2 stat0=3Dff stat1=3Dff devices=3D0x0
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x2448
atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0x2468
ata3: reset tp1 mask=3D03 ostat0=3D7f ostat1=3D7f
ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f
ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f
ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f
ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f
ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f
ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f
ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f
ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f
ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f
ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f
ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f
ata3: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f
ata3: stat1=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f
ata3: reset tp2 stat0=3Dff stat1=3Dff devices=3D0x0
ata3: [MPSAFE]
ata3: [ITHREAD]
pci0: <simple comms, UART> at device 3.3 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0x2400-0x241f
mem 0xe0400000-0xe041ffff,0xe0424000-0xe0424fff irq 20 at device 25.0
on pci0
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xe0400000
em0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to local APIC 0 vector 50
em0: using IRQ 256 for MSI
em0: Using MSI interrupt
em0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xe0424000
em0: The EEPROM Checksum Is Not Valid
device_attach: em0 attach returned 5
uhci0: <Intel 82801I (ICH9) USB controller> port 0x20e0-0x20ff irq 18
at device 26.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x20e0
uhci0: [MPSAFE]
uhci0: [ITHREAD]
uhci0: LegSup =3D 0x0f10
usbus0: <Intel 82801I (ICH9) USB controller> on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0x20c0-0x20df irq 21
at device 26.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x20c0
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 50
uhci1: [MPSAFE]
uhci1: [ITHREAD]
uhci1: LegSup =3D 0x0f10
usbus1: <Intel 82801I (ICH9) USB controller> on uhci1
uhci2: <Intel 82801I (ICH9) USB controller> port 0x20a0-0x20bf irq 17
at device 26.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x20a0
ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 51
uhci2: [MPSAFE]
uhci2: [ITHREAD]
uhci2: LegSup =3D 0x0f10
usbus2: <Intel 82801I (ICH9) USB controller> on uhci2
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem
0xe0426c00-0xe0426fff irq 17 at device 26.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xe0426c00
ehci0: [MPSAFE]
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x0-0x0
pcib1:   no prefetched decode
pci1: <ACPI PCI bus> on pcib1
pci1: domain=3D0, physical bus=3D1
pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pcib2:   domain            0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0x0-0x0
pcib2:   no prefetched decode
pci2: <ACPI PCI bus> on pcib2
pci2: domain=3D0, physical bus=3D2
pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pcib3:   domain            0
pcib3:   secondary bus     3
pcib3:   subordinate bus   3
pcib3:   I/O decode        0x1000-0x1fff
pcib3:   memory decode     0xe0100000-0xe01fffff
pcib3:   no prefetched decode
pci3: <ACPI PCI bus> on pcib3
pci3: domain=3D0, physical bus=3D3
found->	vendor=3D0x11ab, dev=3D0x6101, revid=3D0xb1
	domain=3D0, bus=3D3, slot=3D0, func=3D0
	class=3D01-01-8f, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0007, statreg=3D0x0010, cachelnsz=3D16 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	intpin=3Da, irq=3D9
	powerspec 2  supports D0 D1 D3  current D0
	MSI supports 1 message
	map[10]: type I/O Port, range 32, base 0x1018, size  3, enabled
pcib3: requested I/O range 0x1018-0x101f: in range
	map[14]: type I/O Port, range 32, base 0x1024, size  2, enabled
pcib3: requested I/O range 0x1024-0x1027: in range
	map[18]: type I/O Port, range 32, base 0x1010, size  3, enabled
pcib3: requested I/O range 0x1010-0x1017: in range
	map[1c]: type I/O Port, range 32, base 0x1020, size  2, enabled
pcib3: requested I/O range 0x1020-0x1023: in range
	map[20]: type I/O Port, range 32, base 0x1000, size  4, enabled
pcib3: requested I/O range 0x1000-0x100f: in range
	map[24]: type Memory, range 32, base 0xe0100000, size  9, enabled
pcib3: requested memory range 0xe0100000-0xe01001ff: good
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 18
atapci1: <Marvell 88SX6101 UDMA133 controller> port
0x1018-0x101f,0x1024-0x1027,0x1010-0x1017,0x1020-0x1023,0x1000-0x100f
mem 0xe0100000-0xe01001ff irq 18 at device 0.0 on pci3
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1000
atapci1: [MPSAFE]
atapci1: [ITHREAD]
ata4: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1018
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x1024
ata4: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D51
ata4: stat0=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb
ata4: stat1=3D0x10 err=3D0x01 lsb=3D0x14 msb=3D0xeb
ata4: reset tp2 stat0=3D00 stat1=3D10 devices=3D0x30000
ata4: [MPSAFE]
ata4: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pcib4:   domain            0
pcib4:   secondary bus     4
pcib4:   subordinate bus   4
pcib4:   I/O decode        0x0-0x0
pcib4:   no prefetched decode
pci4: <ACPI PCI bus> on pcib4
pci4: domain=3D0, physical bus=3D4
pcib5: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pcib5:   domain            0
pcib5:   secondary bus     5
pcib5:   subordinate bus   5
pcib5:   I/O decode        0x0-0x0
pcib5:   no prefetched decode
pci5: <ACPI PCI bus> on pcib5
pci5: domain=3D0, physical bus=3D5
uhci3: <Intel 82801I (ICH9) USB controller> port 0x2080-0x209f irq 23
at device 29.0 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2080
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 52
uhci3: [MPSAFE]
uhci3: [ITHREAD]
uhci3: LegSup =3D 0x0f10
usbus4: <Intel 82801I (ICH9) USB controller> on uhci3
uhci4: <Intel 82801I (ICH9) USB controller> port 0x2060-0x207f irq 19
at device 29.1 on pci0
uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2060
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 53
uhci4: [MPSAFE]
uhci4: [ITHREAD]
uhci4: LegSup =3D 0x0f10
usbus5: <Intel 82801I (ICH9) USB controller> on uhci4
uhci5: <Intel 82801I (ICH9) USB controller> port 0x2040-0x205f irq 18
at device 29.2 on pci0
uhci5: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2040
uhci5: [MPSAFE]
uhci5: [ITHREAD]
uhci5: LegSup =3D 0x0f10
usbus6: <Intel 82801I (ICH9) USB controller> on uhci5
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem
0xe0426800-0xe0426bff irq 23 at device 29.7 on pci0
ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xe0426800
ehci1: [MPSAFE]
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib6:   domain            0
pcib6:   secondary bus     6
pcib6:   subordinate bus   6
pcib6:   I/O decode        0xf000-0xfff
pcib6:   memory decode     0xe0000000-0xe00fffff
pcib6:   no prefetched decode
pcib6:   Subtractively decoded bridge.
pci6: <ACPI PCI bus> on pcib6
pci6: domain=3D0, physical bus=3D6
found->	vendor=3D0x168c, dev=3D0x0013, revid=3D0x01
	domain=3D0, bus=3D6, slot=3D0, func=3D0
	class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0216, statreg=3D0x0290, cachelnsz=3D16 (dwords)
	lattimer=3D0x20 (960 ns), mingnt=3D0x0a (2500 ns), maxlat=3D0x1c (7000 ns)
	intpin=3Da, irq=3D9
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xe0000000, size 16, enabled
pcib6: requested memory range 0xe0000000-0xe000ffff: good
pcib6: matched entry for 6.0.INTA
pcib6: slot 0 INTA hardwired to IRQ 21
found->	vendor=3D0x11c1, dev=3D0x5811, revid=3D0x70
	domain=3D0, bus=3D6, slot=3D3, func=3D0
	class=3D0c-00-10, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0216, statreg=3D0x0290, cachelnsz=3D16 (dwords)
	lattimer=3D0x20 (960 ns), mingnt=3D0x0c (3000 ns), maxlat=3D0x18 (6000 ns)
	intpin=3Da, irq=3D11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xe0010000, size 12, enabled
pcib6: requested memory range 0xe0010000-0xe0010fff: good
pcib6: matched entry for 6.3.INTA
pcib6: slot 3 INTA hardwired to IRQ 19
ath0: <Atheros 5212> mem 0xe0000000-0xe000ffff irq 21 at device 0.0 on pci6
ath0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xe0000000
ath0: [MPSAFE]
ath0: [ITHREAD]
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps 36Mbps 48Mbps 54Mbps
ath0: turboG rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps
18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: AR2413 mac 7.9 RF2413 phy 4.5
ath0: Use hw queue 1 for WME_AC_BE traffic
ath0: Use hw queue 0 for WME_AC_BK traffic
ath0: Use hw queue 2 for WME_AC_VI traffic
ath0: Use hw queue 3 for WME_AC_VO traffic
ath0: Use hw queue 8 for CAB traffic
ath0: Use hw queue 9 for beacons
fwohci0: <Lucent FW322/323> mem 0xe0010000-0xe0010fff irq 19 at device
3.0 on pci6
fwohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe0010000
fwohci0: [MPSAFE]
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.0 (ROM=3D0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:90:27:00:01:d0:dc:04
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x41000
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=3D0x00000001, SelfID Count=3D2, CYCLEMAS=
TER mode
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci2: <Intel ICH9 SATA300 controller> port
0x2438-0x243f,0x2464-0x2467,0x2430-0x2437,0x2460-0x2463,0x2020-0x203f
mem 0xe0426000-0xe04267ff irq 21 at device 31.2 on pci0
atapci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2020
atapci2: [MPSAFE]
atapci2: [ITHREAD]
atapci2: Reserved 0x800 bytes for rid 0x24 type 3 at 0xe0426000
atapci2: AHCI called from vendor specific driver
atapci2: AHCI v1.20 controller with 6 3Gbps ports, PM supported
atapci2: Caps: 64bit NCQ SNTF ALP AL CLO 3Gbps PM PMD SSC PSC 32cmd
CCC EM 6ports
ata5: <ATA channel 0> on atapci2
ata5: AHCI reset...
ata5: hardware reset ...
ata5: SATA connect time=3D0ms status=3D00000123
ata5: ready wait time=3D14ms
ata5: software reset port 15...
ata5: ready wait time=3D0ms
ata5: SIGNATURE: 00000101
ata5: AHCI reset done: devices=3D00000001
ata5: [MPSAFE]
ata5: [ITHREAD]
ata6: <ATA channel 1> on atapci2
ata6: AHCI reset...
ata6: hardware reset ...
ata6: SATA connect time=3D0ms status=3D00000123
ata6: ready wait time=3D49ms
ata6: software reset port 15...
ata6: ready wait time=3D0ms
ata6: SIGNATURE: 00000101
ata6: AHCI reset done: devices=3D00000001
ata6: [MPSAFE]
ata6: [ITHREAD]
ata7: <ATA channel 2> on atapci2
ata7: AHCI reset...
ata7: hardware reset ...
ata7: SATA connect time=3D0ms status=3D00000123
ata7: ready wait time=3D26ms
ata7: software reset port 15...
ata7: ready wait time=3D0ms
ata7: SIGNATURE: 00000101
ata7: AHCI reset done: devices=3D00000001
ata7: [MPSAFE]
ata7: [ITHREAD]
ata8: <ATA channel 3> on atapci2
ata8: AHCI reset...
ata8: hardware reset ...
ata8: SATA connect timeout status=3D00000000
ata8: AHCI reset done: phy reset found no device
ata8: [MPSAFE]
ata8: [ITHREAD]
ata9: <ATA channel 4> on atapci2
ata9: AHCI reset...
ata9: hardware reset ...
ata9: SATA connect time=3D0ms status=3D00000123
ata9: ready wait time=3D22ms
ata9: software reset port 15...
ata9: ready wait time=3D0ms
ata9: SIGNATURE: 00000101
ata9: AHCI reset done: devices=3D00000001
ata9: [MPSAFE]
ata9: [ITHREAD]
ata10: <ATA channel 5> on atapci2
ata10: AHCI reset...
ata10: hardware reset ...
ata10: SATA connect time=3D0ms status=3D00000123
ata10: ready wait time=3D22ms
ata10: software reset port 15...
ata10: ready wait time=3D0ms
ata10: SIGNATURE: 00000101
ata10: AHCI reset done: devices=3D00000001
ata10: [MPSAFE]
ata10: [ITHREAD]
ichsmb0: <SMBus controller> port 0x2000-0x201f mem
0xe0427000-0xe04270ff irq 18 at device 31.3 on pci0
ichsmb0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2000
ichsmb0: [MPSAFE]
ichsmb0: [ITHREAD]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 54
uart0: [FILTER]
uart0: fast interrupt
uart0: console (115200,n,8,1)
cpu0: <ACPI CPU> on acpi0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est0: Invalid id16 (set, cur) =3D (2086, 2346)
est0: Invalid freq 2664, ignored.
est0: Invalid id16 (set, cur) =3D (1826, 2346)
est0: Invalid freq 2331, ignored.
est0: Invalid id16 (set, cur) =3D (1565, 2346)
est0: Invalid freq 1998, ignored.
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est1: Invalid id16 (set, cur) =3D (2086, 2346)
est1: Invalid freq 2664, ignored.
est1: Invalid id16 (set, cur) =3D (1826, 2346)
est1: Invalid freq 2331, ignored.
est1: Invalid id16 (set, cur) =3D (1565, 2346)
est1: Invalid freq 1998, ignored.
p4tcc1: <CPU Frequency Thermal Control> on cpu1
isab0: found ICH9 or equivalent chipset: Intel ICH9DO watchdog timer
isa_probe_children: disabling PnP devices
ichwd0: <Intel ICH9DO watchdog timer> on isa0
isab0: found ICH9 or equivalent chipset: Intel ICH9DO watchdog timer
ichwd0: Intel ICH9DO watchdog timer (ICH9 or equivalent)
ichwd0: timer disabled
atrtc: atrtc0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
isa_probe_children: probing non-PnP devices
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sc0: fb0, kbd0, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0 failed to probe at port 0x60 on isa0
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
ppc0 failed to probe at irq 7 on isa0
uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 508766 -> 100000
WARNING: ZFS is considered to be an experimental feature in FreeBSD.
lapic: Divisor 2, Frequency 166747704 hz
Timecounter "TSC" frequency 3001458636 Hz quality -100
Timecounters tick every 1.000 msec
pflog0: bpf attached
lo0: firewire0: 2 nodes, maxhop <=3D 1 cable IRM irm(1)  (me)
firewire0: bus manager 1
bpf attached
ata2: Identifying devices: 00000000
ata2: New devices: 00000000
ata3: Identifying devices: 00000000
ata3: New devices: 00000000
ata4: Identifying devices: 00030000
ata4: New devices: 00030000
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ata4-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA66 cable=3D80 wire
ata4-slave: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA66 cable=3D40 wire
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ZFS filesystem version 13
ZFS storage pool version 13
acd0: <PIONEER DVD-RW DVR-110D/1.37> DVDR drive at ata4 as master
acd0: read 6890KB/s (6890KB/s) write 5511KB/s (6890KB/s), 2000KB buffer, UD=
MA66
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
acd1: DMA limited to UDMA33, device found non-ATA66 cable
acd1: <DVD-ROM BDV316G/VER 0C17> DVDROM drive at ata4 as slave
acd1: read 687KB/s (8251KB/s), 512KB buffer, UDMA33
acd1: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd1: Writes:
acd1: Audio: play, 256 volume levels
acd1: Mechanism: ejectable tray, unlocked
acd1: Medium: no/blank disc
ata5: Identifying devices: 00000001
ata5: New devices: 00000001
ata5-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA133 cable=3D40 wire
ad10: 476940MB <WDC WD5000AAKS-00YGA0 12.01C02> at ata5-master SATA300
ad10: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queu=
e
GEOM: new disk ad10
ad10: Intel check1 failed
ad10: Adaptec check1 failed
ad10: LSI (v3) check1 failed
ad10: LSI (v2) check1 failed
ad10: FreeBSD check1 failed
ata6: Identifying devices: 00000001
ata6: New devices: 00000001
ata6-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA133 cable=3D40 wire
ad12: 476940MB <Seagate ST3500630AS 3.AAK> at ata6-master SATA300
ad12: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queu=
e
GEOM: new disk ad12
firewire0: New S400 device ID:001f5bfffe2776a6
fwohci0: txd err=3D 3 miss Ack err
ad12: Intel check1 failed
ad12: Adaptec check1 failed
ad12: LSI (v3) check1 failed
ad12: LSI (v2) check1 failed
ad12: FreeBSD check1 failed
ata7: Identifying devices: 00000001
ata7: New devices: 00000001
ata7-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA133 cable=3D40 wire
ad14: 238475MB <WDC WD2500KS-00MJB0 02.01C03> at ata7-master SATA300
ad14: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth queu=
e
GEOM: new disk ad14
ad14: Intel check1 failed
ad14: Adaptec check1 failed
ad14: LSI (v3) check1 failed
ad14: LSI (v2) check1 failed
ad14: FreeBSD check1 failed
ata8: Identifying devices: 00000000
ata8: New devices: 00000000
ata9: Identifying devices: 00000001
ata9: New devices: 00000001
ata9-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA133 cable=3D40 wire
ad18: 715404MB <Seagate ST3750640AS 3.AAE> at ata9-master SATA300
ad18: 1465149168 sectors [1453521C/16H/63S] 16 sectors/interrupt 1 depth qu=
eue
GEOM: new disk ad18
ad18: Intel check1 failed
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
ad18: Adaptec check1 failed
uhub4: 2 ports with 2 removable, self powered
ad18: LSI (v3) check1 failed
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
ad18: LSI (v2) check1 failed
ad18: FreeBSD check1 failed
ata10: Identifying devices: 00000001
ata10: New devices: 00000001
ata10-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA133 cable=3D40 wire
ad20: 715404MB <Seagate ST3750640AS 3.AAE> at ata10-master SATA300
ad20: 1465149168 sectors [1453521C/16H/63S] 16 sectors/interrupt 1 depth qu=
eue
GEOM: new disk ad20
ad20: Intel check1 failed
ad20: Adaptec check1 failed
ad20: LSI (v3) check1 failed
ad20: LSI (v2) check1 failed
ad20: FreeBSD check1 failed
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x01000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 48
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 1 vector 49
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 1 vector 50
WARNING: WITNESS option enabled, expect reduced performance.
Root mount waiting for: usbus7 usbus3
Root mount waiting for: usbus7 usbus3
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
ugen3.2: <vendor 0x0781> at usbus3
umass0: <vendor 0x0781 product 0x5406, class 0/0, rev 2.00/2.00, addr
2> on usbus3
umass0:  SCSI over Bulk-Only; quirks =3D 0x0000
Root mount waiting for: usbus3
umass0:1:0:-1: Attached to scbus1
(probe0:umass-sim0:0:0:0): Down reving Protocol Version from 2 to 0?
GEOM: new disk da0pass0 at umass-sim0 bus 0 target 0 lun 0

pass0: <SanDisk Cruzer 8.02> Removable Direct Access SCSI-0 device
pass0: 40.000MB/s transfers
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <SanDisk Cruzer 8.02> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: 3859MB (7905279 512 byte sectors: 255H 63S/T 492C)
Trying to mount root from zfs:alert
ugen5.2: <vendor 0x1241> at usbus5
ukbd0: <vendor 0x1241 product 0x1603, class 0/0, rev 1.10/2.80, addr
2> on usbus5
kbd: new array size 4
kbd1 at ukbd0
kbd1: ukbd0, generic (0), config:0x0, flags:0x3d0000
ugen2.2: <American Power Conversion> at usbus2
ct_to_ts([2009-07-09 12:36:12]) =3D 1247142972.000000000
start_init: trying /sbin/init
lock order reversal:
 1st 0xffffffff80815040 pf task mtx (pf task mtx) @
/usr/src/sys/contrib/pf/net/pf_ioctl.c:1394
 2nd 0xffffffff809f7b40 ifnet (ifnet) @ /usr/src/sys/net/if.c:1887
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2a
_witness_debugger() at _witness_debugger+0x49
witness_checkorder() at witness_checkorder+0x7d2
_rw_rlock() at _rw_rlock+0x60
ifunit() at ifunit+0x22
pfioctl() at pfioctl+0x20ea
devfs_ioctl_f() at devfs_ioctl_f+0x6e
kern_ioctl() at kern_ioctl+0xbc
ioctl() at ioctl+0xf0
syscall() at syscall+0x18b
Xfast_syscall() at Xfast_syscall+0xd0
--- syscall (54, FreeBSD ELF64, ioctl), rip =3D 0x80098a88c, rsp =3D
0x7fffffffb5c8, rbp =3D 0x7fffffffb710 ---
lock order reversal:
 1st 0xffffff0074026098 zfs (zfs) @ /usr/src/sys/kern/vfs_mount.c:1054
 2nd 0xffffff007417dba8 devfs (devfs) @ /usr/src/sys/kern/vfs_subr.c:2083
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2a
_witness_debugger() at _witness_debugger+0x49
witness_checkorder() at witness_checkorder+0x7d2
__lockmgr_args() at __lockmgr_args+0xc92
vop_stdlock() at vop_stdlock+0x39
VOP_LOCK1_APV() at VOP_LOCK1_APV+0xc2
_vn_lock() at _vn_lock+0x50
vget() at vget+0x6c
devfs_allocv() at devfs_allocv+0xee
devfs_root() at devfs_root+0x41
vfs_donmount() at vfs_donmount+0xf93
nmount() at nmount+0x74
syscall() at syscall+0x18b
Xfast_syscall() at Xfast_syscall+0xd0
--- syscall (378, FreeBSD ELF64, nmount), rip =3D 0x8007aaffc, rsp =3D
0x7fffffffdd28, rbp =3D 0x800a04048 ---

Thanks,

Chris
--=20
@chrisattack
-----------------------------------------
http://twitter.com/chrisattack
http://chrisattack.com



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?58c737d70907091052g7a6f962jf87e94974f7e46aa>