Date: Sun, 5 Sep 1999 21:06:27 +0100 (BST) From: Doug Rabson <dfr@nlsystems.com> To: Hellmuth Michaelis <hm@hcs.de> Cc: freebsd-current@freebsd.org Subject: Re: PnP card + pcm = unable to boot Message-ID: <Pine.BSF.4.10.9909052105590.2081-100000@salmon.nlsystems.com> In-Reply-To: <m11Nd26-0003cyC@hcswork.hcs.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, 5 Sep 1999, Hellmuth Michaelis wrote: > > For those currently working on the pnp stuff: > > i just made a new userland and kernel of -current and i'm unable to boot > that kernel anymore, even after disabling the pcm driver with boot -c > and even after removing my pcm0 line from my kernel config file. > > The last kernel from Aug 31 booted fine with this device: > > Probing for PnP devices: > Trying Read_Port at 203 > PnP: CSN 1 COMP_DEVICE_ID = 0x06b0d041 > CSN 1 Vendor ID: TER1411 [0x1114b250] Serial 0xffffffff Comp ID: PNPb006 [0x06b0 > d041] > Called nullpnp_probe with tag 0x00000001, type 0x1114b250 > Called nullpnp_probe with tag 0x00000001, type 0x06b0d041 > port 0x0220 0x0388 0x0530 0x0000 irq 5:0 drq 1:3 en 1 > port 0x0220 0x0388 0x0530 0x0000 irq 5:0 drq 1:3 en 1 > mss_attach <Terratec Soundsystem BASE 1>1 at 0x530 irq 5 dma 1:3 flags 0x13 > pcm1 (CS423x/Yamaha/AD1816 <Terratec Soundsystem BASE 1> sn 0xffffffff) at 0x530 > -0x53f irq 5 drq 1 flags 0x13 on isa > > Now i get with the pcm driver removed the following output: > > unknown0 <TERRATEC SOUNDSYSTEM BASE1> at port 0x220-0x22f, 0x388-0x33b, \ > 0x530-0x53f irq 7 drq0,1 on isa 0 > unknown1 <TERRATEC SOUNDSYSTEM BASE1> at port 0x330-0x331, irq 9 on isa 0 > unknown2 <TERRATEC SOUNDSYSTEM BASE1> at port 0x200-0x207 on isa 0 > unknown2 <TERRATEC SOUNDSYSTEM BASE1> at port 0x590-0x597 on isa 0 > > and there any output stops. I'm not even able to go into the compiled-in ddb. > At this point the only thing helps is pressing the reset switch. > > With the pcm driver compiled in, unknown0 gets pcm0 and a Soundblaster Pro 3.2 > and unknown1 gets pcm1 with the correct chipset type but output stops and > the kernel hangs at the same place. > > I'll be happy to provide more information if needed! With a kernel that actually boots, can you get the output of 'pnpinfo' and send it. -- Doug Rabson Mail: dfr@nlsystems.com Nonlinear Systems Ltd. Phone: +44 181 442 9037 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.10.9909052105590.2081-100000>