Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 24 May 2005 12:06:30 -0300
From:      Franco Bruno Borghesi <fborghesi@gmail.com>
To:        "Jonathan M. Slivko" <freebsd-lists@slivko.org>
Cc:        freebsd-questions@freebsd.org
Subject:   Re: 3Ware SATA RAID 8000 - Supported on 5.3-R?
Message-ID:  <e13c14ec050524080654677a58@mail.gmail.com>
In-Reply-To: <429341E4.5000108@slivko.org>
References:  <50408.70.18.16.72.1116942842.squirrel@www.slivko.org> <e13c14ec050524075978735028@mail.gmail.com> <429341E4.5000108@slivko.org>

next in thread | previous in thread | raw e-mail | index | archive | help
Could you post your /etc/fstab?

2005/5/24, Jonathan M. Slivko <freebsd-lists@slivko.org>:
>=20
> Yes, this is actually the autoboot fsck thats breaking, the one that is
> called from /etc/rc (via /etc/rc.d/). I can physically take the box down
> and do an offline fsck of it and that works fine, it's just when it's in
> multi-user mode thats the problem.
>=20
> -- Jonathan
>=20
> Franco Bruno Borghesi wrote:
> > For fsck to work (to actually correct any problems you may have),
> > partitions should be umounted first. Are you sure you have umounted
> > /dev/twedXXXX before running fsck?
> >
> >
> > 2005/5/24, Jonathan M. Slivko <freebsd-lists@slivko.org
> > <mailto:freebsd-lists@slivko.org>>:
> >
> > Hello,
> >
> > I have an interesting question, I have a Pentium 4 2.4Ghz (No HT
> > Enabled),
> > 2x80GB SATA Hard Drives in RAID 1. The box boots, works, etc. However,
> > whenever you try and do an fsck -y, it says:
> >
> > root@bonjour (~)% fsck -y
> > ** /dev/twed0s1a (NO WRITE)
> > ** Last Mounted on /
> > ** Root file system
> > ** Phase 1 - Check Blocks and Sizes
> > ** Phase 2 - Check Pathnames
> > ** Phase 3 - Check Connectivity
> > ** Phase 4 - Check Reference Counts
> > ** Phase 5 - Check Cyl groups
> > 2821 files, 31805 used, 474682 free (322 frags, 59295 blocks, 0.1%
> > fragmentation)
> >
> > ** /dev/twed0s1g (NO WRITE)
> > ** Last Mounted on /home
> > ** Phase 1 - Check Blocks and Sizes
> > ** Phase 2 - Check Pathnames
> > ** Phase 3 - Check Connectivity
> > ** Phase 4 - Check Reference Counts
> > ** Phase 5 - Check Cyl groups
> > 82057 files, 557735 used, 12912399 free (2343 frags, 1613757 blocks,
> > 0.0%
> > fragmentation)
> >
> > ** /dev/twed0s1d (NO WRITE)
> > ** Last Mounted on /tmp
> > ** Phase 1 - Check Blocks and Sizes
> > ** Phase 2 - Check Pathnames
> > ** Phase 3 - Check Connectivity
> > ** Phase 4 - Check Reference Counts
> > ** Phase 5 - Check Cyl groups
> > 30 files, 1787 used, 504700 free (20 frags, 63085 blocks, 0.0%
> > fragmentation)
> >
> > ** /dev/twed0s1e (NO WRITE)
> > ** Last Mounted on /usr
> > ** Phase 1 - Check Blocks and Sizes
> > ** Phase 2 - Check Pathnames
> > ** Phase 3 - Check Connectivity
> > ** Phase 4 - Check Reference Counts
> > ** Phase 5 - Check Cyl groups
> > 251160 files, 1318908 used, 13912410 free (73346 frags, 1729883 blocks,
> > 0.5% fragmentation)
> >
> > ** /dev/twed0s1f (NO WRITE)
> > ** Last Mounted on /var
> > ** Phase 1 - Check Blocks and Sizes
> > ** Phase 2 - Check Pathnames
> > ** Phase 3 - Check Connectivity
> > ** Phase 4 - Check Reference Counts
> > ** Phase 5 - Check Cyl groups
> > 4424 files, 63321 used, 7042830 free (2462 frags, 880046 blocks, 0.0%
> > fragmentation)
> >
> > The drives are Seagate SATA's (7200RPM) with a 3Ware SATA RAID
> > Controller
> > (8006-2LP) using the twe kernel driver. The drives themselves allow dat=
a
> > to be read to/written from them, but fsck will not work (and is hanging
> > things on boot).
> >
> > Anyone got any ideas? I looked at www.3ware.com <http://www.3ware.com>;
> > <http://www.3ware.com>; earlier and it says that
> > the 8006-2LP's support FreeBSD 4.x, but not 5.x - could this be a resul=
t
> > of that, seeing as otherwise the drives/RAID work fine (AFAIK, it could
> > not be and I'm just not sure how to test it).
> >
> > TIA,
> > -- Jonathan
> > _______________________________________________
> > freebsd-questions@freebsd.org <mailto:freebsd-questions@freebsd.org>
> > mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> > To unsubscribe, send any mail to "
> > freebsd-questions-unsubscribe@freebsd.org
> > <mailto:freebsd-questions-unsubscribe@freebsd.org>"
> >
> >
>=20
> --
> Jonathan M. Slivko - jonathan@slivko.org
> "Linux: The Choice for the GNU Generation"
> - http://www.linux.org/ -
>=20
> Don't fear the penguin.
> .^.
> /V\
> /( )\
> ^^-^^
> He's here to help.
>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?e13c14ec050524080654677a58>