Date: Tue, 28 Oct 2003 16:10:51 -0500 From: "J. Seth Henry" <jshamlet@comcast.net> To: pdesai1@cs.uh.edu Cc: freebsd-questions@freebsd.org Subject: RE: Via EPIA 800Mhz Message-ID: <200310281610.51573.jshamlet@comcast.net>
next in thread | raw e-mail | index | archive | help
>Hi! > >=A0 Does anyone know if the Via EPIA 800MHz is supported in any version of >freebsd. I tried it with 4.6.2 and it reboots as soon as kernel loads. >Or do I need to enable any specific options in the kernel config. > >It has the following CPU- >VIA C3 800 E-Series processor, 800 MHz > >I would appreciate any kind of help. > >Thanks > >******************************************************************* > Pranav A. Desai Yes, it does. My ipfilter/NAT machine is running 4.8-REL on a 933MHz EPIA=20 board, and I have an X terminal running 4.8-REL on a 800MHz EPIA board. I use the following kernel configuration (for the X terminal): # Kernel configuration for gearbox (4/25/2003) working copy machine i386 cpu I686_CPU ident gearbox maxusers 0 options INET #InterNETworking #options INET6 #IPv6 Communications Protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=3D1000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev options QUOTA options SUIDDIR options NO_F00F_HACK options DDB_UNATTENDED device isa device eisa device pci # Floppy drives #device fdc0 at isa? port IO_FD1 irq 6 drq 2 #device fd0 at fdc0 drive 0 #device fd1 at fdc0 drive 1 # ATA and ATAPI devices device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives #device atapifd # ATAPI floppy drives #device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering # SCSI Controllers #device ahc # AHA2940 and onboard AIC7xxx devices #device sym # NCR/Symbios Logic device # SCSI peripherals device scbus # SCSI bus (required) device da # Direct Access (disks) #device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) #device apm0 at nexus? disable flags 0x20 # Advanced Power Management # Serial (COM) ports device sio0 at isa? port IO_COM1 irq 4 device sio1 at isa? port IO_COM2 flags 0x10 irq 3 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs. device miibus device vr # Intel EtherExpress PRO/100B (82557, 82558) # Pseudo devices - the number indicates how many units to allocate. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP #pseudo-device ppp 1 # Kernel PPP #pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" pseudo-device gif 4 # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device usb # USB Bus (required) device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse device uscanner # Scanners device ucom device uplcom device uvscom device uvisor device uftdi # Sound Support device pcm device joy0 at isa? port IO_GAME Regards, Seth Henry
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200310281610.51573.jshamlet>