Date: Thu, 6 Mar 2008 18:44:07 +0200 From: Vladimir Terziev <vlady@gbservices.biz> To: freebsd-usb@FreeBSD.org Subject: USB Smart card reader/writer problem Message-ID: <20080306184407.750408c7.vlady@gbservices.biz>
next in thread | raw e-mail | index | archive | help
Hi, i have ACS ACR38T Smart card reader/write device (idVendor=0x072f, idProduct=0x90cc), which is an USB stick. I try to make it to work under FreeBSD (trys have been done on 5.4, 5.5 and 6.2). The device has 3 endpoints -- interrupt-in, configured as /dev/ugenX.1 and bulk-in/bulk-out, configured as /dev/ugenX.2. Neither the driver from openct-0.6.14 port nor the driver from ccid-1.3.5 port work for the device. The communication with the device gets stuck on BULK-OUT operations. write(2) calls to /dev/ugenX.2 hang forever despite the timeout set with USB_SET_TIMEOUT. The device has been tested to work under Windoze, so as general, it's not broken, but just irresponsive. Could someone give me some clues about the nature of the problem ? Thanks in advance! Vladimir
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20080306184407.750408c7.vlady>