Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 18 Mar 2006 10:45:08 +0100
From:      "Dominique Goncalves" <dominique.goncalves@gmail.com>
To:        freebsd-stable@freebsd.org, damien.bergamini@free.fr
Subject:   Re: Wireless USB Adapter DWL G122 not detected by ural(4)
Message-ID:  <7daacbbe0603180145s785ca01v3f67e5ddaf4a0844@mail.gmail.com>
In-Reply-To: <7daacbbe0603160501s4aefef11vf15f73d877108360@mail.gmail.com>
References:  <7daacbbe0603160501s4aefef11vf15f73d877108360@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Hi

On 3/16/06, Dominique Goncalves <dominique.goncalves@gmail.com> wrote:
> Hi,
>
> I'm trying to use a Wireless USB Adapter DWL G122 on RELENG_6 but it
> is not detected and no ural0 interface is created, this device is
> listed in the hardware section of ural(4).
>
> $ uname -a
> FreeBSD freebsd 6.1-PRERELEASE FreeBSD 6.1-PRERELEASE #2: Thu Mar 16
> 11:45:02 CET 2006     root@freebsd:/usr/obj/usr/src/sys/GENERIC  i386
>
> # usbd -d -v
> usbd: opened /dev/usb0
> usbd: reading configuration file /etc/usbd.conf
> usbd: opened /dev/usb
> usbd: device-attach event at 1142509893.453666000, 802.11 bg WLAN, Ralink=
:
>   vndr=3D0x07d1 prdct=3D0x3c03 rlse=3D0x0001 clss=3D0x0000 subclss=3D0x00=
00 prtcl=3D0x0000
>   device names: ugen0
> usbd: Found action 'USB device' for 802.11 bg WLAN, Ralink at ugen0
> usbd: device-detach event at 1142509897.473305000, product 0x3c03,
> vendor 0x07d1:
>   vndr=3D0x07d1 prdct=3D0x3c03 rlse=3D0x0001 clss=3D0x0000 subclss=3D0x00=
00 prtcl=3D0x0000
>
> Let me know if you need more information.
>
> Thanks for your help.
>
> Regards.
>
> Copyright (c) 1992-2006 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
> FreeBSD 6.1-PRERELEASE #2: Thu Mar 16 11:45:02 CET 2006
>     root@freebsd:/usr/obj/usr/src/sys/GENERIC
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Pentium II/Pentium II Xeon/Celeron (397.95-MHz 686-class CPU)
>   Origin =3D "GenuineIntel"  Id =3D 0x652  Stepping =3D 2
>   Features=3D0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MC=
A,CMOV,PAT,PSE36,MMX,FXSR>
> real memory  =3D 134217728 (128 MB)
> avail memory =3D 121806848 (116 MB)
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> cpu0 on motherboard
> pcib0: <Intel 82443BX (440 BX) host to PCI bridge> pcibus 0 on motherboar=
d
> pir0: <PCI Interrupt Routing Table: 5 Entries> on motherboard
> pci0: <PCI bus> on pcib0
> agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem
> 0x44000000-0x47ffffff at device 0.0 on pci0
> pcib1: <PCI-PCI bridge> at device 1.0 on pci0
> pci1: <PCI bus> on pcib1
> pci1: <display, VGA> at device 0.0 (no driver attached)
> fxp0: <Intel 82558 Pro/100 Ethernet> port 0x2000-0x201f mem
> 0x40200000-0x40200fff,0x40100000-0x401fffff irq 11 at device 10.0 on
> pci0
> miibus0: <MII bus> on fxp0
> inphy0: <i82555 10/100 media interface> on miibus0
> inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> fxp0: Ethernet address: 00:08:c7:0f:5a:19
> isab0: <PCI-ISA bridge> at device 20.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel PIIX4 UDMA33 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2040-0x204f at device 20.1 on
> pci0
> ata0: <ATA channel 0> on atapci0
> ata1: <ATA channel 1> on atapci0
> uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x2020-0x203f
> irq 11 at device 20.2 on pci0
> uhci0: [GIANT-LOCKED]
> usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> pci0: <bridge> at device 20.3 (no driver attached)
> pmtimer0 on isa0
> orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xe0000-0xe7fff on isa0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 =
on isa0
> fdc0: [FAST]
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/8 bytes threshold
> ppbus0: <Parallel port bus> on ppc0
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=3D0x300>
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> sio1 at port 0x2f8-0x2ff irq 3 on isa0
> sio1: type 16550A
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> unknown: <PNP0401> can't assign resources (port)
> unknown: <PNP0501> can't assign resources (port)
> unknown: <PNP0501> can't assign resources (port)
> unknown: <PNP0700> can't assign resources (port)
> unknown: <PNP0c01> can't assign resources (memory)
> unknown: <PNP0303> can't assign resources (port)
> unknown: <PNP0c02> can't assign resources (port)
> Timecounter "TSC" frequency 397948150 Hz quality 800
> Timecounters tick every 1.000 msec
> ad0: 6149MB <FUJITSU MPC3064AT CC05> at ata0-master UDMA33
> acd0: CDROM <CD-224E/9.0A> at ata1-master PIO4
> Trying to mount root from ufs:/dev/ad0s1a
> ugen0: Ralink 802.11 bg WLAN, rev 2.00/0.01, addr 2
> ugen0: at uhub0 port 1 (addr 2) disconnected
> All threads purged from ugen0.1
> All threads purged from ugen0
> ugen0: detached
>
> --
> There's this old saying: "Give a man a fish, feed him for a day. Teach
> a man to fish, feed him for life."
>

Thanks to a patch made by Sam Leffler [1], the adapter is now detected
with ural(4) but is not working (tested on HEAD and RELENG_6)

$ ifconfig -v ural0
ural0: flags=3D108803<UP,BROADCAST,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
        inet6 fe80::215:e9ff:fe46:d588%ural0 prefixlen 64 scopeid 0x8
        ether 00:15:e9:46:d5:88
        media: IEEE 802.11 Wireless Ethernet autoselect
        status: no carrier
        ssid "" channel 1 (2412) bssid 00:00:00:00:00:00
        authmode OPEN privacy OFF deftxkey UNDEF powersavemode OFF
        powersavesleep 100 txpowmax 100 txpower 100 rtsthreshold 2346
        mcastrate 1 fragthreshold 2346 -pureg protmode CTS -wme -burst
        roaming AUTO bintval 0

from dmesg:

ral0: Ralink 802.11 bg WLAN, rev 2.00/0.01, addr 2
ural0: MAC/BBP RT2570 (rev 0x00), RF unknown
ural0: Ethernet address: 00:15:e9:46:d5:88
ural0: if_start running deferred for Giant
ural0: timeout waiting for BBP/RF to wakeup
ural0: timeout waiting for BBP/RF to wakeup
ural0: timeout waiting for BBP/RF to wakeup
ural0: timeout waiting for BBP/RF to wakeup
ural0: timeout waiting for BBP/RF to wakeup
ural0: timeout waiting for BBP/RF to wakeup
ural0: at uhub0 port 1 (addr 2) disconnected
ural0: could not write MAC register: STALLED
ural0: could not write MAC register: STALLED
ural0: could not write MAC register: STALLED
ural0: detached

If I try
# ifconfig ural0 up scan
ural0: timeout waiting for BBP/RF to wakeup

and no access point is detected

with wpa_supplicant also:

Setting scan request: 0 sec 100000 usec
Starting AP scan (broadcast SSID)
ioctl[SIOCS80211]: Invalid argument
ioctl[SIOCS80211, op 23, arg 0x0]: Invalid argument
Failed to initiate AP scan.

Thanks for your help.

Regards.

[1] http://djdomics.free.fr/FreeBSD/ural_pwlg122.diff
--
There's this old saying: "Give a man a fish, feed him for a day. Teach
a man to fish, feed him for life."



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?7daacbbe0603180145s785ca01v3f67e5ddaf4a0844>