Date: Wed, 17 May 2000 20:48:10 -0500 From: "Randall D. DuCharme" <randyd@tcainternet.com> To: smp@freebsd.org Subject: Re: FreeBSD 4.0-Release and P6DNF Message-ID: <39234BD9.3393D947@tcainternet.com> References: <200005180125.TAA76379@Ilsa.StevesCafe.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Thanks Steve,
Here's the output:
===============================================================================
MPTable, version 2.0.15
-------------------------------------------------------------------------------
MP Floating Pointer Structure:
location: BIOS
physical address: 0x000fb860
signature: '_MP_'
length: 16 bytes
version: 1.4
checksum: 0x46
mode: Virtual Wire
-------------------------------------------------------------------------------
MP Config Table Header:
physical address: 0x000f7bd0
signature: 'PCMP'
physical address: 0x000f7bd0
signature: 'PCMP'
base table length: 260
version: 1.4
checksum: 0x8d
OEM ID: 'INTEL '
Product ID: '440FX '
OEM table pointer: 0x00000000
OEM table size: 0
entry count: 24
local APIC address: 0xfee00000
extended table length: 8
extended table checksum: 117
-------------------------------------------------------------------------------
MP Config Base Table Entries:
--
Processors: APIC ID Version State Family Model Step Flags
0 0x11 BSP, usable 6 3 2
0x183fb
ff
1 0x11 AP, usable 6 3 2
0x183fb
ff
--
Bus: Bus ID Type
0 PCI
1 ISA
--
I/O APICs: APIC ID Version State Address
2 0x11 usable 0xfec00000
--
I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT conforms conforms 1 0 2 0
INT conforms conforms 1 1 2 1
INT conforms conforms 1 0 2 2
INT conforms conforms 1 3 2 3
INT conforms conforms 1 4 2 4
INT conforms conforms 1 5 2 5
INT conforms conforms 1 6 2 6
INT conforms conforms 1 7 2 7
INT conforms conforms 1 8 2 8
INT conforms conforms 1 10 2 10
INT conforms conforms 1 12 2 12
INT conforms conforms 1 13 2 13
INT conforms conforms 1 15 2 20
INT active-lo level 1 11 2 16
INT active-lo level 1 11 2 17
INT active-lo level 1 14 2 18
INT active-lo level 1 9 2 19
--
Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT conforms conforms 0 0:A 255 0
NMI conforms conforms 0 0:A 255 1
-------------------------------------------------------------------------------
MP Config Extended Table Entries:
--
bus ID: 1 bus info: 0x01 parent bus ID: 0
-------------------------------------------------------------------------------
# SMP kernel config file options:
# Required:
options SMP # Symmetric MultiProcessor Kernel
options APIC_IO # Symmetric (APIC) I/O
# Optional (built-in defaults will work in most cases):
#options NCPU=2 # number of CPUs
#options NBUS=2 # number of busses
#options NAPIC=1 # number of IO APICs
#options NINTR=24 # number of INTs
===============================================================================
Hope this helps.
RD
Steve Passe wrote:
>
> Hi,
>
> > Greetings,
> >
> > I just tried installing 4.0-Release on a SuperMicro P6DNF system running 2
> > Intel 333MHz Overdrive CPUs. A UP kernel runs fine but an SMP kernel panics
> > on boot with....
> >
> > bogus MP table, 2 IO APIC pins connected to the same PCI device or ISA/EISA
> > interrupt
> >
> > panic: resource_list_alloc: resource entry is busy
> > mp_lock = 00000001 cpu_id-0: lapic.id=00000000
> >
> >
> > I've been through the mailing list archives and there's been tons of problems
> > reported with the SuperMicro boards, but none of the older fixes seem to
> > apply.
> >
> > Suggestions greatly appreciated.
>
> First step is to run mptable as root on the UP system and post the results
> here.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-smp" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?39234BD9.3393D947>