Date: Tue, 4 Nov 2003 15:16:18 +0100 (CET) From: Konrad Heuer <kheuer2@gwdg.de> To: Jason Lavigne <jlavigne@bwlogic.com> Cc: freebsd-questions@freebsd.org Subject: Re: Trouble with a DLT7000 tape drive Message-ID: <20031104151004.R16730@gwdu60.gwdg.de> In-Reply-To: <003b01c3a2dc$a762ca00$0501a8c0@canada> References: <003b01c3a2dc$a762ca00$0501a8c0@canada>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 4 Nov 2003, Jason Lavigne wrote: > I have found some errors that I get on my tape drive. I am wondering if > anyone would know if this is SCSI card, cable, tape drive or tape issue, > or maybe something different all together. I am using DLT Type-IV tapes > and this is on a FreeBSD 4.7-RELEASE system. > > TIA, > > Jay > > dmesg output > > ahc0: <Adaptec 2902/04/10/15/20/30C SCSI adapter> port 0xdc00-0xdcff mem > 0xdffff000-0xdfffffff irq 11 at device 18.0 on pci0 > aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs > sa0 at ahc0 bus 0 target 1 lun 0 > sa0: <QUANTUM DLT7000 2565> Removable Sequential Access SCSI-2 device > sa0: 10.000MB/s transfers (10.000MHz, offset 15) > ch0 at ahc0 bus 0 target 3 lun 0 > ch0: <ADIC VLS DLT 0305> Removable Changer SCSI-2 device > ch0: 3.300MB/s transfers > ch0: 7 slots, 1 drive, 1 picker, 1 portal > (sa0:ahc0:0:1:0): WRITE FILEMARKS. CDB: 10 0 0 0 2 0 > (sa0:ahc0:0:1:0): MEDIUM ERROR info:2 csi:0,0,1,40 asc:c,0 > (sa0:ahc0:0:1:0): Write error > (sa0:ahc0:0:1:0): failed to write terminating filemark(s) > (sa0:ahc0:0:1:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 0 0 0 0 0 > (sa0:ahc0:0:1:0): ABORTED COMMAND info:ffffa000 csi:0,0,1,40 asc:44,89 > (sa0:ahc0:0:1:0): Vendor Specific ASCQ > (sa0:ahc0:0:1:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 0 0 0 0 0 > (sa0:ahc0:0:1:0): ABORTED COMMAND csi:0,0,1,40 asc:44,89 > (sa0:ahc0:0:1:0): Vendor Specific ASCQ > (sa0:ahc0:0:1:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 0 0 0 0 0 > (sa0:ahc0:0:1:0): ABORTED COMMAND info:ffffa000 csi:0,0,1,40 asc:44,89 > (sa0:ahc0:0:1:0): Vendor Specific ASCQ > (sa0:ahc0:0:1:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 0 0 0 0 0 > (sa0:ahc0:0:1:0): ABORTED COMMAND info:2000 csi:0,0,1,40 asc:44,89 > (sa0:ahc0:0:1:0): Vendor Specific ASCQ > (sa0:ahc0:0:1:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 0 0 0 0 0 > (sa0:ahc0:0:1:0): ABORTED COMMAND csi:0,0,1,40 asc:44,89 > (sa0:ahc0:0:1:0): Vendor Specific ASCQ > (sa0:ahc0:0:1:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 0 0 0 0 0 > (sa0:ahc0:0:1:0): ABORTED COMMAND info:ffffa000 csi:0,0,1,40 asc:44,89 > (sa0:ahc0:0:1:0): Vendor Specific ASCQ > (sa0:ahc0:0:1:0): tape is now frozen- use an OFFLINE, REWIND or MTEOM > command to clear this state. I had a similar problem with my DLT4000 drive. It was caused by unsuitable media. Although the tapes seemed to be suitable for DLT4000 drives there were preformatted in some kind; I bought tapes from diffferent manufacturer, and they do fine. I studied the documentation of my drive which explains the "Vendor Specific ASCQ" im some way so that I got the idea to use other tapes. Best regards Konrad Heuer (kheuer2@gwdg.de) ____ ___ _______ GWDG / __/______ ___ / _ )/ __/ _ \ Am Fassberg / _// __/ -_) -_) _ |\ \/ // / 37077 Goettingen /_/ /_/ \__/\__/____/___/____/ Germany
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031104151004.R16730>