Date: Tue, 21 Feb 2006 19:45:50 +0200 From: Giorgos Keramidas <keramida@ceid.upatras.gr> To: Peter <petermatulis@yahoo.ca> Cc: freebsd-questions <freebsd-questions@freebsd.org> Subject: Re: getting started with USB hard drive Message-ID: <20060221174550.GA54062@flame.pc> In-Reply-To: <20060221164402.65924.qmail@web60016.mail.yahoo.com> References: <20060221164402.65924.qmail@web60016.mail.yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 2006-02-21 11:44, Peter <petermatulis@yahoo.ca> wrote:
> Hi. I picked up a USB hard drive and quite frankly I am not sure how to
> use disklabel with it (what device I should use). Here are the messages
> appended to my logs when connected:
>
> kernel: umass0: PI-036 USB2.0 Drive, rev 2.00/0.01, addr 3
> kernel: umass0: Get Max Lun not supported (STALLED)
> kernel: da0 at umass-sim0 bus 0 target 0 lun 0
> kernel: da0: <WDC WD20 00JB-00KFA0 \0000\0000> Fixed Direct Access SCSI-0
> device
> kernel: da0: 1.000MB/s transfers
> kernel: da0: 190782MB (390721968 512 byte sectors: 255H 63S/T 24321C)
>
> Can anyone lend a hand? I am running 5.4-STABLE with a "pretty GENERIC
> kernel".
Very cool!
Your kernel discovered the USB disk and created a /dev/da0 device node
for it.
I think you'l find this post useful, as it describes what I did to use
my own USB disk on FreeBSD:
http://keramida.serverhive.com/weblog/archives/2004-10-16/using-a-usb-20-flash-mini-disk-on-freebsd
Then this one too, to enable USB 2.X support (and greater transfer
speeds, as a result):
http://keramida.serverhive.com/weblog/archives/2005-06-23/usb-2x-support-in-freebsd
Have fun,
Giorgos
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060221174550.GA54062>