Date: Fri, 18 Oct 2002 06:10:09 GMT From: abc@anchorageinternet.org To: "Send-PR" <FreeBSD-gnats-submit@FreeBSD.org> Subject: kern/44197: ATA CDROM's Message-ID: <200210180610.g9I6A9L6000755@en26.groggy.anc.acsalaska.net>
next in thread | raw e-mail | index | archive | help
>Number: 44197
>Category: kern
>Synopsis: ATA CDROM's
>Confidential: no
>Severity: critical
>Priority: high
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Thu Oct 17 23:20:01 PDT 2002
>Closed-Date:
>Last-Modified:
>Originator: Joe Public
>Release: i386 FreeBSD 4.7-RELEASE
>Organization:
no org
>Environment:
^^^^^^^^^^^^^^^^^^^^^^^^
>Description:
ATA CDROM reads crash machine so it needs hard-reset.
>How-To-Repeat:
copy a large file (100MB or so) off a ATA CD-RW.
FreeBSD 4.7-RELEASE #0: Wed Oct 16 04:28:20 AKDT 2002
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 99869677 Hz
CPU: AMD-K5(tm) Processor (99.87-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x514 Stepping = 4
Features=0x21bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE>
AMD Features=0x0
real memory = 100663296 (98304K bytes)
avail memory = 94998528 (92772K bytes)
Preloaded elf kernel "kernel" at 0xc02e8000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc02e809c.
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Promise ATA100 controller> port 0xef00-0xef3f,0xefe0-0xefe3,0xefa8-0xefaf,0xefe4-0xefe7,0xeff0-0xeff7 mem 0xebfc0000-0xebfdffff irq 11 at device 4.0 on pci0
ata2: at 0xeff0 on atapci0
ata3: at 0xefa8 on atapci0
pci0: <S3 ViRGE DX/GX graphics accelerator> at 6.0 irq 0
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc9fff on isa0
sc0: <System console> on isa0
sc0: VGA <9 virtual consoles, flags=0x200>
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ed0 at port 0x340-0x35f irq 9 on isa0
ed0: address 00:00:1b:35:06:76, type NE2000 (16 bit)
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard HP LaserJet 1200> PRINTER PJL,MLC,PCL,PCLXL,POSTSCRIPT
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
sbc0: <Creative ViBRA16C> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,5 on isa0
pcm0: <SB16 DSP 4.13> on sbc0
ad4: DMA limited to UDMA33, non-ATA66 cable or device
ad4: 38166MB <WDC WD400AB-22CDB0> [77545/16/63] at ata2-master UDMA33
acd0: CD-RW <CREATIVE CD-RW RW8435E> at ata2-slave PIO4
Mounting root from ufs:/dev/ad4a
WARNING: / was not properly dismounted
Oct 17 19:17:34 en26 /kernel: acd0: READ_BIG command timeout - resetting
Oct 17 19:17:34 en26 /kernel: ata2: resetting devices .. ad4: DMA limited to UDMA33, non-ATA66 cable or device
Oct 17 19:17:34 en26 /kernel: acd0: timeout waiting for cmd=ef s=08 e=00
Oct 17 19:17:34 en26 /kernel: done
>Fix:
dunno. i thought this was supposed to be fixed for 4.7.
i haven't been able to use my CD-RW with FBSD for over a
year now - this is not good.
>Release-Note:
>Audit-Trail:
>Unformatted:
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200210180610.g9I6A9L6000755>