Date: Sun, 21 Jul 2002 20:49:36 +0100 From: <sroberts@dsl.pipex.com> To: Adam Weinberger <adam@vectors.cx> Cc: <sroberts@dsl.pipex.com>, Adam Weinberger <adam@vectors.cx>, Kevin Golding <kevin@caomhin.demon.co.uk>, <freebsd-questions@FreeBSD.ORG>, <freebsd-gnome@FreeBSD.ORG> Subject: Re: Installing gnome2 with XFree86-4 - Why is this so difficilt????? Message-ID: <1027280976.3d3b1050e470b@netmail.pipex.net> In-Reply-To: <20020721194941.GK94707@vectors.cx> References: <1027264013.3d3ace0d2ae43@netmail.pipex.net> <PBz3TBB3MtO9Ews2@caomhin.demon.co.uk> <1027267150.3d3ada4e19ce0@netmail.pipex.net> <WMqhADBSVwO9EwfI@caomhin.demon.co.uk> <1027278885.3d3b0825bd614@netmail.pipex.net> <20020721192915.GH94707@vectors.cx> <1027279818.3d3b0bca6f416@netmail.pipex.net> <20020721194941.GK94707@vectors.cx>
next in thread | previous in thread | raw e-mail | index | archive | help
Thanks Adam,
Just wanted to ensure I read your post in the correct perspective.
Stacey
Quoting Adam Weinberger <adam@vectors.cx>:
> my post was in direct response to your questions about "how do i
> completely remove gnome."
>
> some components seem to be installed, and some aren't. if you have no
> particular schedule, just remove everything having to do with Xwindows
> and start again.
>
> pkg_deinstall -r XFree\*
> cd /usr/ports/x11/XFree86
> make install clean
> cd /usr/ports/x11/gnome2
> make install clean
>
> -Adam
>
>
> >> (07.21.2002 @ 1230 PST): sroberts@dsl.pipex.com said, in 5.7K: <<
> >
> > Thanks Adam,
> > But do I do this instead of continuing with the gnome2 bins that
> I
> > already have? The reply I had to the gnome2 build errorlog I submitted
> earlier
> > led me to believe that the gnome2 installation errors center on the
> fact that
> > something wasn't quite right in the XFree86-4 install I did yesterday.
> >
> > Or., is your post for general information?
> >
> > Thanks all the same.
> >
> > Stacey
> >
> > Quoting Adam Weinberger <adam@vectors.cx>:
> >
> > > if you have sysutils/portupgrade installed, do
> > >
> > > ~/# pkg_deinstall -r gnome\*
> > >
> > > that will delete anything gnome, and everything built that depends
> on
> > > it.
> > >
> > > -Adam
> > >
> > >
> > > >> (07.21.2002 @ 1214 PST): sroberts@dsl.pipex.com said, in 4.2K: <<
> > > >
> > > > Hi Kevin,
> > > > Okay.., I'm at the point of considering rebuilding the box
> here.
> > > >
> > > > Before I do, I'd appreciate though, frank answers to two scenarios
> if
> > > you can..,
> > > >
> > > > 1] Stop the current re-install of XFree86-4 (with the constant
> > > failings due to
> > > > components being already installed:-
> > > >
> > > > Can I stop this re-install?
> > > > Is there a procedure for then ensuring that I *copmpletely* wipe
> all
> > > instances
> > > > of XFree-<anything> from the system, before attempting installing
> via
> > > a package?
> > > >
> > > > 2] Seeing that this whole situation is all about my initial failed
> > > attempts to
> > > > install gnome2,:
> > > >
> > > > After completion of the XFree86-4 install (via ports or packages),
> > > should I
> > > > proceed on from the point where the gnome2 install fails (at the
> gle
> > > error)?
> > > >
> > > > If not, and I have to re-fetch fresh gnome2 sources, is there a
> > > procedure for
> > > > *completely* removing ALL instances of gnome from the system?
> > > >
> > > > For both scenarios above, how do I ensure that I get the latest
> > > (hopefully
> > > > correct) binaries for installation?
> > > >
> > > > Thanks again Kevin., Please don't think that I mean to place you
> in a
> > > spot or
> > > > anything., you're just the *only* person that's bothered to reply
> to
> > > my post on
> > > > this list.
> > > >
> > > > Stacey
> > > >
> > > > Quoting Kevin Golding <kevin@caomhin.demon.co.uk>:
> > > >
> > > > > Someone, quite probably , once wrote:
> > > > > >I'm actually running the re-install of XFree86-4 at the moment
> > > wihtout
> > > > > having
> > > > > >done a make distclean. Is this the reason why for each
> component,
> > > it
> > > > > fails
> > > > > >with "error: XFree86-4<component> already installed, perhaps an
> > > older
> > > > > >version..,"?
> > > > > >
> > > > > >Would it be in my interest then to stop this and restart from
> the
> > > > > beginning?
> > > > >
> > > > > It sounds like everything wasn't quite removed when you
> deinstalled.
> > > > >
> > > > > ls /var/db/pkg | grep -i xfree
> > > > >
> > > > > That should show up a few things that might need removing. Else
> > > make
> > > > > sure your ports tree is fully up to date and then run:
> > > > >
> > > > > portversion -L =
> > > > >
> > > > > That may show up a few out of date things that could be worth
> > > upgrading.
> > > > >
> > > > > portupgrade -rR XFree86-4
> > > > >
> > > > > The above might resolve a few issues if you are out of date.
> Else
> > > it
> > > > > might be worth thinking about packages this time:
> > > > >
> > > > > pkg_add -r XFree86-4
> > > > >
> > > > > Will get the latest binary and hopefully get you back to a
> working
> > > > > state. Then you could probably track X using portupgrade to
> reduce
> > > > > hassle.
> > > > >
> > > > > Kevin
> > > > >
> > > > > >Quoting Kevin Golding <kevin@caomhin.demon.co.uk>:
> > > > > >
> > > > > >> Someone, quite probably Stacey Roberts, once wrote:
> > > > > >> >1] From the *one* reply I've had to my earlier post
> concerning
> > > the
> > > > > >> gnome2
> > > > > >> >install failure, it appear that I have to re-install
> > > XFree86-4.2.0.
> > > > > Why
> > > > > >> is that
> > > > > >> >after running pkg_delete on XFree86-4.0.2, "make" doesn't go
> out
> > > and
> > > > > >> get a
> > > > > >> >fresh set of files for the re-install?
> > > > > >> >
> > > > > >> >Am I missing something about the make process here?
> Presumably
> > > there
> > > > > >> was
> > > > > >> >something wrong with the XFree86-4 sources I got yesterday
> when
> > > I
> > > > > >> installed it,
> > > > > >> >so I would have thought it logical that I should be
> obtaining a
> > > > > fresh
> > > > > >> set of
> > > > > >> >source files for the new install.
> > > > > >>
> > > > > >> To fetch new sources you need to remove the old ones from
> > > > > >> /usr/ports/distfiles. You can either manually rm each
> tarball or
> > > > > just
> > > > > >> run "make distclean" before "make".
> > > > > >>
> > > > > >> It can also be worth running "make fetch" as your first step
> to
> > > > > install
> > > > > >> a port as that simply downloads any files you are missing for
> > > that
> > > > > port
> > > > > >> (although not dependencies).
> > > > > >>
> > > > > >> >2] To do the install of XFree86-4 anyways, what I did was
> > > pkg_delete
> > > > > of
> > > > > >> XFree86-
> > > > > >> >3 in /var/db/pkg; rm -rf /usr/X11R6/*, then editing
> > > /etc/make.conf
> > > > > to
> > > > > >> reflect
> > > > > >> >that the XFree version is now 4
> > > > > >>
> > > > > >> Since 4.6 I believe the default X has been 4 making such a
> config
> > > > > >> redundant. It might be worth running through
> > > /etc/defaults/make.conf
> > > > > >> and seeing if you need to change anything else. If you're
> not
> > > using
> > > > > 4.6
> > > > > >> then don't worry about it.
> > > > > >>
> > > > > >> Kevin
> > > > > >> --
> > > > > >> kevin@caomhin.demon.co.uk
> > > > > >>
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >To Unsubscribe: send mail to majordomo@FreeBSD.org
> > > > > >with "unsubscribe freebsd-questions" in the body of the message
> > > > >
> > > > > --
> > > > > kevin@caomhin.demon.co.uk
> > > > >
> > > >
> > > >
> > > >
> > > >
> > > > To Unsubscribe: send mail to majordomo@FreeBSD.org
> > > > with "unsubscribe freebsd-questions" in the body of the message
> > > >
> > > >> end of "Re: Installing gnome2 with XFree86-4 - Why is this so
> > > difficilt?????" from sroberts@dsl.pipex.com <<
> > >
> > >
> > > --
> > > "Oh good, my dog found the chainsaw."
> > > -Lilo, "Lilo & Stitch"
> > > Adam Weinberger
> > > adam@vectors.cx
> > > http://vectors.cx
> > >
> > >
> >
> >
> >
> >> end of "Re: Installing gnome2 with XFree86-4 - Why is this so
> difficilt?????" from sroberts@dsl.pipex.com <<
>
>
> --
> "Oh good, my dog found the chainsaw."
> -Lilo, "Lilo & Stitch"
> Adam Weinberger
> adam@vectors.cx
> http://vectors.cx
>
>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-gnome" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1027280976.3d3b1050e470b>