Date: Wed, 13 Feb 2008 17:43:36 -0500 From: Brian Biskeborn <bbiskebo@Princeton.EDU> To: Scott Long <scottl@samsco.org> Cc: freebsd-current@freebsd.org Subject: Re: hptrr driver panics on 7.0-RC2 Message-ID: <47B37298.1020004@princeton.edu> In-Reply-To: <47B340DF.1010607@samsco.org> References: <47B315C8.3060805@bosco.princeton.edu> <47B340DF.1010607@samsco.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Scott Long wrote: > Brian Biskeborn wrote: >> Hello all, >> >> I've reported this problem to HighPoint, but I'm curious to see >> whether anyone else has run into it. I'm using a RocketRaid 2314MS >> card on an amd64 system. When I boot the install CD for 7.0-RC2, the >> driver panics: >> >> hptrr: (null): 180*32=5760 bytes >> hptrr: (null): 180*288=51840 bytes >> >> Fatal trap 12: page fault while in kernel mode >> cpuid = 0; apic id = 00 >> fault virtual address = 0x3 >> fault code = supervisor read data, page not present >> instruction pointer = 0x8:0xffffffff80502032 >> stack pointer = 0x10:0xffffffff80fd0950 >> frame pointer = 0x10:0xffffffff80822ecf >> code segment = base 0x0, limit 0xfffff, type 0x1b >> = DPL 0, pres 1, long 1, def32 0, gran 1 >> processor eflags = interrupt enabled, resume, IOPL = 0 >> current process = 0 (swapper) >> trap number = 12 >> panic: page fault >> cpuid = 0 >> >> This is with no drives connected to the controller. My machine specs: >> Dell Inspiron 531S >> Processor: Athlon 64 X2 4000+ >> Motherboard: Asus M2N61-AX (seems to be made specifically for Dell) >> with the MCP61 chipset >> >> So: has anyone else seen a panic with this or other HighPoint cards? I >> know HighPoint provides a binary blob for their driver, but could the >> problem be in the wrapper code someplace? >> >> I wish I could provide more information, but not being able to install >> FreeBSD limits my options there. I had to take a picture of the screen >> and type in the panic output by hand :) >> > > I'll take a look at it. Since you don't have any drives connected, can > you remove the card and then do the install? > Heh, not a bad idea... Is there a way to hard-code the dump device into the kernel configuration? This crash happens too early for rc.conf to have any effect. I tried building the kernel with online debugging enabled, but my USB keyboard doesn't work after the panic (and the box has no PS/2 ports). Cheers, Brian
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?47B37298.1020004>