Date: Thu, 12 May 2005 16:48:36 +0200 From: Matthias Buelow <mkb@incubus.de> To: Ronald Klop <ronald-freebsd8@klop.yi.org> Cc: freebsd-stable@freebsd.org Subject: Re: apm in 5.4 Message-ID: <42836CC4.9010605@incubus.de> In-Reply-To: <op.sqn1zpvm8527sy@localhost> References: <42836321.6050007@incubus.de> <op.sqn1zpvm8527sy@localhost>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------000603060003080508030005
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
Ronald Klop wrote:
> It is available. I'm running it on my laptop now.
> I've these in my config.
>
> grep apm /etc/rc.conf
> apm_enable="YES"
> apmd_enable="YES"
Do you have apm(4) compiled into the kernel? I've loaded the module in
loader.conf and during boot aswell when I try to use apm(8), I get:
apm: can't open /dev/apm: No such file or directory
kldstat output is the following:
Id Refs Address Size Name
1 2 0xc0400000 5dde24 kernel
2 1 0xc09de000 62b4 apm.ko
The machine is a Compaq Armada m700, kernel is GENERIC from fresh
installation; dmesg output is attached.
mkb.
--------------000603060003080508030005
Content-Type: text/plain;
name="dmesg"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="dmesg"
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE #0: Sun May 8 10:21:06 UTC 2005
root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (845.85-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 469696512 (447 MB)
avail memory = 449949696 (429 MB)
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0x50000000-0x53ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
cbb0: <TI1450 PCI-CardBus Bridge> mem 0x41100000-0x41100fff irq 11 at device 4.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <TI1450 PCI-CardBus Bridge> mem 0x41180000-0x41180fff irq 11 at device 4.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x4010-0x401f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x4020-0x403f irq 11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge> at device 7.3 (no driver attached)
pci0: <multimedia, audio> at device 8.0 (no driver attached)
fxp0: <Intel 82559ER Pro/100 Ethernet> port 0x2000-0x203f mem 0x41200000-0x4121ffff,0x41280000-0x41280fff irq 11 at device 9.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:d0:59:64:93:3b
pci0: <simple comms, UART> at device 9.1 (no driver attached)
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd17ff,0xc0000-0xcffff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
sio4: <SMCf010> at port 0x100-0x107,0x3e8-0x3ef irq 3 drq 5 on isa0
sio4: type 16550A
unknown: <PNP0c02> can't assign resources (port)
Timecounter "TSC" frequency 845849804 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 19077MB <HITACHI DK23CA-20/00H1A0A4> [38760/16/63] at ata0-master UDMA33
acd0: DVDROM <Compaq DVD-ROM SD-C2402/1A05> at ata0-slave PIO4
wi0: <MELCO WLI-PCM-L11> at port 0x180-0x1bf irq 11 function 0 config 1 on pccard0
wi0: using Lucent Technologies, WaveLAN/IEEE
wi0: Lucent Firmware: Station (8.36.1)
wi0: Ethernet address: 00:02:2d:a9:07:71
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
Mounting root from ufs:/dev/ad0s1a
--------------000603060003080508030005--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?42836CC4.9010605>