Date: Tue, 23 May 2006 13:54:20 -0700 From: "Atom Powers" <atom.powers@gmail.com> To: Yaning <yaning98@yahoo.com> Cc: freebsd-questions@freebsd.org Subject: Re: Question about DHCP client with multi-interface. Message-ID: <df9ac37c0605231354w3371601bsd2267e03b1e88122@mail.gmail.com> In-Reply-To: <20060523203605.4273.qmail@web54302.mail.yahoo.com> References: <20060523203605.4273.qmail@web54302.mail.yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 5/23/06, Yaning <yaning98@yahoo.com> wrote: > All, > My system have three network cards, interface are > fxp0, fxp1, em0. If I set one interface with static IP > address at install time, such as: > em0 IP =3D 10.20.16.59 I hope these three interfaces are not on the same physical network. > then I enable one interface with DHCP, such as, > running command: > > dhlient fxp0 > In /etc/rc.conf ifconfig_em0=3D"10.20.16.59/24" (or whatever your netmask is) ifconfig_fxp0=3D"DHCP" > Then I reboot system. After system boot up, fxp0 > assign an IP address by DHCP server. > But the static ip address on em0 is gone. > How can I correct this problem? It shouldn't be gone, but it may be unused if both interfaces are on the same network. (Use "ifconfig" to check the status of your interfaces.) > > Thanks, > > Yaning > --=20 -- Perfection is just a word I use occasionally with mustard. --Atom Powers--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?df9ac37c0605231354w3371601bsd2267e03b1e88122>