Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 09 Nov 2004 15:42:18 -0500
From:      misnagid <misnagid@usa.net>
To:        <freebsd-amd64@freebsd.org>
Subject:   X not properly installed AMD64 Tyan S2885 
Message-ID:  <615ikiuJj9440S07.1100032938@uwdvg013.cms.usa.net>

next in thread | raw e-mail | index | archive | help
I just did a new unstall of FreeBDS 5.3 RELEASE for AMD64 on a dual Opter=
on 4
GB DRAM Tyan S2885.  Unlike other entries here, this new install was not =
done
with the RAID 3ware driver.  Nor were the symptoms alike.
The install went along fine till when the x86congfig was supposed to beco=
me
available and be run during install.  There were no such commands availab=
le. =

X does not properly start.

Please assist.
Jerry

/var/log/kdm.log:
*************************************************************************=
*******
Note that your system uses syslog. All of kdm's internally generated mess=
ages
(i.e., not from libraries and external programs/scripts it uses) go to th=
e
daemon.* syslog facility; check your syslog configuration to find out to
which
file(s) it is logged. PAM logs messages related to authentication to
authpriv.*.
*************************************************************************=
*******


Release Date: 18 December 2003
X Protocol Version 11, Revision 0, Release 6.7
Build Operating System: FreeBSD 5.3 amd64 [ELF] =

Current Operating System: FreeBSD chassid.sothfd01.mi.comcast.net 5.3-REL=
EASE
FreeBSD 5.3-RELEASE #0: Fri Nov  5 03:50:01 UTC 2004    =

root@fanboy.samsco.home:/usr/obj/usr/src/sys/GENERIC amd64
Build Date: 13 October 2004
	Before reporting problems, check http://wiki.X.Org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (=3D=3D) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(=3D=3D) Log file: "/var/log/Xorg.0.log", Time: Mon Nov  8 23:51:40 2004
(EE) Unable to locate/open config file
xf86AutoConfig: Primary PCI is 5:0:0
Running "/usr/X11R6/bin/getconfig -X 60700000 -I
/etc/X11,/usr/X11R6/etc/X11,/usr/X11R6/lib/modules,/usr/X11R6/lib/X11/get=
config
-v 0x10de -d 0x0331 -r 0xa1 -s 0x10b0 -b 0x0407 -c 0x0300"
getconfig.pl: Version 1.0.
getconfig.pl: Xorg Version: 6.7.0.0.
getconfig.pl: 23 built-in rules.
getconfig.pl: file '/usr/X11R6/lib/X11/getconfig/xorg.cfg' has bad signat=
ure.
getconfig.pl: no rules in file '/usr/X11R6/lib/X11/getconfig/xorg.cfg'.
getconfig.pl: Evaluated 23 rules with 0 errors.
getconfig.pl: Weight of result is 500.
New driver is "nv"
(=3D=3D) Using default built-in configuration (53 lines)
(EE) Failed to load module "fbdev" (module does not exist, 0)

Release Date: 18 December 2003
X Protocol Version 11, Revision 0, Release 6.7
Build Operating System: FreeBSD 5.3 amd64 [ELF] =

Current Operating System: FreeBSD chassid.sothfd01.mi.comcast.net 5.3-REL=
EASE
FreeBSD 5.3-RELEASE #0: Fri Nov  5 03:50:01 UTC 2004    =

root@fanboy.samsco.home:/usr/obj/usr/src/sys/GENERIC amd64
Build Date: 13 October 2004
	Before reporting problems, check http://wiki.X.Org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (=3D=3D) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(=3D=3D) Log file: "/var/log/Xorg.0.log", Time: Tue Nov  9 00:38:08 2004
(EE) Unable to locate/open config file
xf86AutoConfig: Primary PCI is 5:0:0
Running "/usr/X11R6/bin/getconfig -X 60700000 -I
/etc/X11,/usr/X11R6/etc/X11,/usr/X11R6/lib/modules,/usr/X11R6/lib/X11/get=
config
-v 0x10de -d 0x0331 -r 0xa1 -s 0x10b0 -b 0x0407 -c 0x0300"
getconfig.pl: Version 1.0.
getconfig.pl: Xorg Version: 6.7.0.0.
getconfig.pl: 23 built-in rules.
getconfig.pl: file '/usr/X11R6/lib/X11/getconfig/xorg.cfg' has bad signat=
ure.
getconfig.pl: no rules in file '/usr/X11R6/lib/X11/getconfig/xorg.cfg'.
getconfig.pl: Evaluated 23 rules with 0 errors.
getconfig.pl: Weight of result is 500.
New driver is "nv"
(=3D=3D) Using default built-in configuration (53 lines)
(EE) Failed to load module "fbdev" (module does not exist, 0)




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?615ikiuJj9440S07.1100032938>