Date: Sat, 3 Jun 2006 19:09:32 GMT From: Zoltan Tanczos <wirving@beats.hu> To: freebsd-gnats-submit@FreeBSD.org Subject: www/98463: Gigabyte GA-K8N51GMF (Socket 754) working with FreeBSD 6.1-amd64 Message-ID: <200606031909.k53J9WGZ019763@www.freebsd.org> Resent-Message-ID: <200606031910.k53JAJSX057859@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 98463 >Category: www >Synopsis: Gigabyte GA-K8N51GMF (Socket 754) working with FreeBSD 6.1-amd64 >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-www >State: open >Quarter: >Keywords: >Date-Required: >Class: change-request >Submitter-Id: current-users >Arrival-Date: Sat Jun 03 19:10:18 GMT 2006 >Closed-Date: >Last-Modified: >Originator: Zoltan Tanczos >Release: FreeBSD 6.1 amd64 >Organization: >Environment: FreeBSD pumukli 6.1-RELEASE FreeBSD 6.1-RELEASE #2: Sat May 27 18:30:06 CEST 2006 w_irving@pumukli:/usr/obj/usr/src/sys/pumukli amd64 >Description: Gigabyte GA-K8N51GMF Socket 754 motherboard works with FreeBSD 6.1 amd64. Onboard LAN/sound/RAID/SATA untested. The dmesg: Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-RELEASE #2: Sat May 27 18:30:06 CEST 2006 w_irving@pumukli:/usr/obj/usr/src/sys/pumukli ACPI APIC Table: <GBT AWRDACPI> Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Sempron(tm) Processor 2800+ (1607.33-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x20fc2 Stepping = 2 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> Features2=0x1<SSE3> AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow> AMD Features2=0x1<LAHF> real memory = 503250944 (479 MB) avail memory = 476106752 (454 MB) ioapic0 <Version 1.1> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <GBT AWRDACPI> on motherboard acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi0: Power Button (fixed) acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR ACPI-0501: *** Error: Handler for [SystemMemory] returned AE_AML_ALIGNMENT ACPI-1304: *** Error: Method execution failed [\\_SB_.MEM_._CRS] (Node 0xffffff000008b400), AE_AML_ALIGNMENT ACPI-0239: *** Error: Method execution failed [\\_SB_.MEM_._CRS] (Node 0xffffff000008b400), AE_AML_ALIGNMENT can't fetch resources for \\_SB_.MEM_ - AE_AML_ALIGNMENT cpu0: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <memory, RAM> at device 0.0 (no driver attached) pci0: <memory, RAM> at device 0.1 (no driver attached) pci0: <memory, RAM> at device 0.2 (no driver attached) pci0: <memory, RAM> at device 0.3 (no driver attached) pci0: <memory, RAM> at device 0.4 (no driver attached) pci0: <memory, RAM> at device 0.5 (no driver attached) pci0: <memory, RAM> at device 0.6 (no driver attached) pci0: <memory, RAM> at device 0.7 (no driver attached) pci0: <display, VGA> at device 5.0 (no driver attached) pci0: <memory, RAM> at device 9.0 (no driver attached) isab0: <PCI-ISA bridge> at device 10.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 10.1 (no driver attached) pci0: <memory, RAM> at device 10.2 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xf7000000-0xf7000fff irq 21 at device 11.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 8 ports with 8 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf7001000-0xf70010ff irq 22 at device 11.1 on pci0 ehci0: [GIANT-LOCKED] usb1: EHCI version 1.0 usb1: companion controller, 8 ports each: usb0 usb1: <EHCI (generic) USB 2.0 controller> on ehci0 usb1: USB revision 2.0 uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub1: 8 ports with 8 removable, self powered atapci0: <nVidia nForce MCP51 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 13.0 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pcib1: <ACPI PCI-PCI bridge> at device 16.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcm0: <Creative EMU10K1> port 0xd000-0xd01f irq 17 at device 6.0 on pci1 pcm0: <SigmaTel STAC9708/11 AC97 Codec> rl0: <RealTek 8139 10/100BaseTX> port 0xd800-0xd8ff mem 0xf4000000-0xf40000ff irq 18 at device 7.0 on pci1 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:e0:4c:e8:80:86 fwohci0: <VIA Fire II (VT6306)> port 0xdc00-0xdc7f mem 0xf4001000-0xf40017ff irq 19 at device 14.0 on pci1 fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:00:14:85:00:c3:46:b0 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:00:14:c3:46:b0 fwe0: Ethernet address: 02:00:14:c3:46:b0 fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0: <Standard parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse Explorer, device ID 4 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ugen0: American Power Conversion Back-UPS CS 500 FW:808.q5.I USB FW:q5, rev 1.10/0.06, addr 2 ulpt0: hp deskjet 5100, rev 2.00/1.00, addr 3, iclass 7/1 ulpt0: using bi-directional mode Timecounter "TSC" frequency 1607326696 Hz quality 800 Timecounters tick every 1.000 msec ad0: 152626MB <SAMSUNG SV1604E VW100-06> at ata0-master UDMA133 ad1: 114473MB <Seagate ST3120022A 8.01> at ata0-slave UDMA100 acd0: DVDROM <SAMSUNG DVD-ROM SD-616E/F504> at ata1-slave UDMA33 Trying to mount root from ufs:/dev/ad0s1a >How-To-Repeat: >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200606031909.k53J9WGZ019763>