Date: Mon, 9 Sep 2013 14:24:18 -0700 From: Adrian Chadd <adrian@freebsd.org> To: Sean Bruno <sbruno@freebsd.org> Cc: freebsd-embedded <freebsd-embedded@freebsd.org> Subject: Re: Buffalo Airstation build support [update] Message-ID: <CAJ-Vmon8i-W6WMPU9wWtFN4Tbod51omwzGscHrFemWEe41E1VA@mail.gmail.com> In-Reply-To: <1378756216.76655.12.camel@localhost> References: <1378494822.48894.9.camel@localhost> <1378756216.76655.12.camel@localhost>
next in thread | previous in thread | raw e-mail | index | archive | help
Hm, can you use a static GEOM config to stripe them? -adrian On 9 September 2013 12:50, Sean Bruno <sean_bruno@yahoo.com> wrote: > On Fri, 2013-09-06 at 12:13 -0700, Sean Bruno wrote: > > > > > Implement support for Buffalo, "OpenWRT Friendly" Atheros Mips 24k > > board > > in the wifi builder. > > > > I'm still working on the kernconf, but the wifi builder support will > > create and image called /tftpboot/wzr300hp-tftp.bin that is accepted > > by > > the router when pushed in via tftp and uboot following the > > instructions > > at: > > > http://wiki.openwrt.org/toh/buffalo/wzr-hp-g300h#oem.installation.using.the.tftp.method > > > > > > Thanks to Hiren doing the Picostation work, this Buffalo is now running! > > I'm going through the GPIO pins today, if I don't get any other > outstanding issues. > > Item1: UBoot is not giving me a functional rootfs partition. I > emulated the OpenWRT behavior to get it working. > > Item2: there are 2 16M Flash devices. Linux seems to concatenate them > into one device. I'm looking at spi(4) to see if it has that type of > capabilities. > > Item3: Unable to cfg_save. I don't think I have the cfg part mapped > correctly: > > dd: /dev/map/cfg: Input/output error > 0+1 records in > 0+0 records out > 0 bytes transferred in 0.250469 secs (0 bytes/sec) > > New kerconf: > http://people.freebsd.org/~sbruno/WZR-300HP > > New kernconf.hints > http://people.freebsd.org/~sbruno/WZR-300HP.hints > > dmesg: > http://people.freebsd.org/~sbruno/buffalo_wzr_300hp_dmesg.txt > > FreeBSD Wifi Builder Diffs: > http://people.freebsd.org/~sbruno/buffalo_airstation_support.txt >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-Vmon8i-W6WMPU9wWtFN4Tbod51omwzGscHrFemWEe41E1VA>