Date: Sun, 29 Jul 2001 14:47:48 +0300 From: "Vladislav V. Shikhov" <vladsh@ezmail.ru> To: questions@FreeBSD.ORG Subject: cdrecord Message-ID: <11616.010729@ezmail.ru>
next in thread | raw e-mail | index | archive | help
Hello All!
I have CD-RW IDE drive SONY CD-RW CRX140E/1.0n, but can't use it to burn
cd with cdrecord (cdrecord -scanbus shows nothing).
What must i include to the kernel to get this thing work?
This is my dmesg output:
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.4-STABLE #5: Mon Jul 24 09:37:29 MSD 2000
root@mystery.ettrade.kirov.ru:/usr/src/sys/compile/TUI
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 598475203 Hz
CPU: Pentium III (598.48-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,<b18>,MMX,FXSR,<b25>>
real memory = 134217728 (131072K bytes)
avail memory = 128012288 (125012K bytes)
Preloaded elf kernel "kernel" at 0xc0270000.
Pentium Pro MTRR support enabled
Probing for devices on PCI bus 0:
chip0: <Intel 82443BX host to PCI bridge> rev 0x03 on pci0.0.0
chip1: <Intel 82443BX host to AGP bridge> rev 0x03 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.7.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1
chip3: <Intel 82371AB Power management controller> rev 0x02 on pci0.7.3
tekram_trm0: <Tekram DC395U/UW/F DC315/U TRM-S1040 Fast20 Wide SCSI Adapter> rev 0x01 int a irq 11 on pci0.8.0
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x02 int a irq 10 on pci0.10.0
fxp0: Ethernet address 00:a0:c9:a8:db:30
vga0: <Cirrus Logic GD5464 SVGA controller> rev 0x01 on pci0.11.0
Probing for devices on PCI bus 1:
Probing for PnP devices:
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model Generic PS/2 mouse, device ID 0
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (atapi): <SONY CD-RW CRX140E/1.0n>, removable, accel, dma, iordis
acd0: drive speed 3445 - 5512KB/sec, 4096KB cache
acd0: supported read types: CD-R, CD-RW, CD-DA, packet track
acd0: supported write types: CD-R, CD-RW, test write
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: CD-RW 120mm data disc loaded, unlocked
wdc1 not found at 0x170
ppc0 at 0x378 irq 7 flags 0x40 on isa
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
Waiting 15 seconds for SCSI devices to settle
changing root device to da0s1a
da0 at tekram_trm0 bus 0 target 6 lun 0
da0: <IBM DPSS-309170N S93E> Fixed Direct Access SCSI-3 device
da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C)
da1 at tekram_trm0 bus 0 target 8 lun 0
da1: <IBM DPSS-309170N S93E> Fixed Direct Access SCSI-3 device
da1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da1: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C)
Best regards,
Vladislav mailto:vladsh@ezmail.ru
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?11616.010729>