Date: Fri, 13 Sep 2002 16:14:10 -0700 From: "David O'Brien" <obrien@freebsd.org> To: current@freebsd.org Subject: no floppy drive with acpi.ko loaded Message-ID: <20020913231410.GA45974@dragon.nuxi.com>
next in thread | raw e-mail | index | archive | help
If I load ACPI on my Gigabyte GA-7VTXE+ rev 1.0 motherboard I have no floppy drive support (ie. no fdc or fd0 devices). Below is the verbose dmesg.boot both with and followed by w/o ACPI: ========================================================================== syncing disks... 6 6 done Uptime: 1m15s Terminate ACPI stray irq 9 Rebooting... Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #1: Fri Sep 13 14:32:07 PDT 2002 rootk@freebsd.amd.com:/usr/src/sys/i386/compile/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0665000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06650b4. Calibrating clock(s) ... TSC clock: 1541331109 Hz, i8254 clock: 1193276 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method Timecounter "TSC" frequency 1541221497 Hz CPU: AMD Athlon(tm) XP 1800+ (1541.22-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x662 Stepping = 2 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xffffffffc0480000<MP,AMIE,DSP,3DNow!> Data TLB: 32 entries, fully associative Instruction TLB: 16 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative real memory = 268369920 (262080K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x0068c000 - 0x0ffe7fff, 261472256 bytes (63836 pages) avail memory = 253505536 (247564K bytes) bios32: Found BIOS32 Service Directory header at 0xc00fdb00 bios32: Entry = 0xfdb10 (c00fdb10) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xdb31 pnpbios: Found PnP BIOS data at 0xc00f7990 pnpbios: Entry = f0000:6714 Rev = 1.0 Other BIOS signatures found: null: <null device, zero device> random: <entropy source> mem: <memory & I/O> Pentium Pro MTRR support enabled pci_open(1): mode 1 addr port (0x0cf8) is 0x80010048 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=30991106) Using $PIR table, 10 entries at 0xc00f7fb0 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 1 A 0x01 3 4 5 6 7 10 11 12 14 15 embedded 0 1 B 0x02 3 4 5 6 7 10 11 12 14 15 embedded 0 17 A 0xfe 14 embedded 0 17 B 0xff 15 embedded 0 17 C 0x03 3 4 5 6 7 10 11 12 14 15 embedded 0 17 D 0x05 3 4 5 6 7 10 11 12 14 15 slot 1 0 9 A 0x02 3 4 5 6 7 10 11 12 14 15 slot 1 0 9 B 0x03 3 4 5 6 7 10 11 12 14 15 slot 1 0 9 C 0x05 3 4 5 6 7 10 11 12 14 15 slot 1 0 9 D 0x01 3 4 5 6 7 10 11 12 14 15 slot 2 0 10 A 0x03 3 4 5 6 7 10 11 12 14 15 slot 2 0 10 B 0x05 3 4 5 6 7 10 11 12 14 15 slot 2 0 10 C 0x01 3 4 5 6 7 10 11 12 14 15 slot 2 0 10 D 0x02 3 4 5 6 7 10 11 12 14 15 slot 3 0 11 A 0x05 3 4 5 6 7 10 11 12 14 15 slot 3 0 11 B 0x01 3 4 5 6 7 10 11 12 14 15 slot 3 0 11 C 0x02 3 4 5 6 7 10 11 12 14 15 slot 3 0 11 D 0x03 3 4 5 6 7 10 11 12 14 15 slot 4 0 12 A 0x01 3 4 5 6 7 10 11 12 14 15 slot 4 0 12 B 0x02 3 4 5 6 7 10 11 12 14 15 slot 4 0 12 C 0x03 3 4 5 6 7 10 11 12 14 15 slot 4 0 12 D 0x05 3 4 5 6 7 10 11 12 14 15 slot 5 0 13 A 0x02 3 4 5 6 7 10 11 12 14 15 slot 5 0 13 B 0x03 3 4 5 6 7 10 11 12 14 15 slot 5 0 13 C 0x05 3 4 5 6 7 10 11 12 14 15 slot 5 0 13 D 0x01 3 4 5 6 7 10 11 12 14 15 embedded 0 16 A 0x02 3 4 5 6 7 10 11 12 14 15 embedded 0 19 A 0x03 3 4 5 6 7 10 11 12 14 15 embedded 0 18 A 0x01 3 4 5 6 7 10 11 12 14 15 embedded 0 18 B 0x02 3 4 5 6 7 10 11 12 14 15 embedded 0 18 C 0x03 3 4 5 6 7 10 11 12 14 15 embedded 0 18 D 0x05 3 4 5 6 7 10 11 12 14 15 npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <AMIINT VIA_K7 > on motherboard acpi0: power button is handled as a fixed feature programming model. ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 Timecounter "ACPI-fast" frequency 3579545 Hz acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib1 pci0: physical bus=0 map[10]: type 3, range 32, base e0000000, size 26, enabled found-> vendor=0x1106, dev=0x3099, revid=0x00 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 powerspec 2 supports D0 D3 current D0 found-> vendor=0x1106, dev=0xb099, revid=0x00 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 map[10]: type 4, range 32, base 0000d800, size 5, enabled found-> vendor=0x1102, dev=0x0002, revid=0x07 bus=0, slot=10, func=0 class=04-01-00, hdrtype=0x00, mfdev=1 intpin=a, irq=10 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000dc00, size 3, enabled found-> vendor=0x1102, dev=0x7002, revid=0x07 bus=0, slot=10, func=1 class=09-80-00, hdrtype=0x00, mfdev=1 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000d400, size 5, enabled map[14]: type 1, range 32, base dfffffe0, size 5, enabled found-> vendor=0x1022, dev=0x2000, revid=0x36 bus=0, slot=12, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=11 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000d000, size 7, enabled map[14]: type 1, range 32, base dfffff00, size 7, enabled found-> vendor=0x10b7, dev=0x9055, revid=0x30 bus=0, slot=13, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=5 powerspec 1 supports D0 D1 D2 D3 current D0 found-> vendor=0x1106, dev=0x3147, revid=0x00 bus=0, slot=17, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 0000ff00, size 4, enabled found-> vendor=0x1106, dev=0x0571, revid=0x06 bus=0, slot=17, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 0000c800, size 5, enabled found-> vendor=0x1106, dev=0x3038, revid=0x23 bus=0, slot=17, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 intpin=d, irq=10 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 0000cc00, size 5, enabled found-> vendor=0x1106, dev=0x3038, revid=0x23 bus=0, slot=17, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 intpin=d, irq=10 powerspec 2 supports D0 D3 current D0 agp0: <VIA Generic host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 agp0: allocating GATT for aperture of size 256M pcib2: <PCI-PCI bridge> at device 1.0 on pci0 pcib2: secondary bus 1 pcib2: subordinate bus 1 pcib2: I/O decode 0x9000-0x9fff pcib2: memory decode 0xdec00000-0xdfcfffff pcib2: prefetched decode 0xdaa00000-0xdeafffff pci1: <PCI bus> on pcib2 pci1: physical bus=1 map[10]: type 3, range 32, base dc000000, size 25, enabled map[14]: type 1, range 32, base dfcfc000, size 14, enabled map[18]: type 1, range 32, base df000000, size 23, enabled found-> vendor=0x102b, dev=0x0525, revid=0x04 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 pci1: <display, VGA> at device 0.0 (no driver attached) pci0: <multimedia, audio> at device 10.0 (no driver attached) pci0: <input device> at device 10.1 (no driver attached) pcn0: <AMD PCnet/PCI 10/100BaseTX> port 0xd400-0xd41f mem 0xdfffffe0-0xdfffffff irq 11 at device 12.0 on pci0 pcn0: Ethernet address: 00:a0:d2:18:32:81 miibus0: <MII bus> on pcn0 lxtphy0: <LXT970 10/100 media interface> on miibus0 lxtphy0: 100baseFX, 100baseFX-FDX, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: pcn0 attached xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xd000-0xd07f mem 0xdfffff00-0xdfffff7f irq 5 at device 13.0 on pci0 xl0: Ethernet address: 00:01:02:3d:4f:7b xl0: media options word: a xl0: found MII/AUTO miibus1: <MII bus> on xl0 xlphy0: <3Com internal media interface> on miibus1 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: xl0 attached isab0: <PCI-ISA bridge> at device 17.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 8233 ATA133 controller> port 0xff00-0xff0f at device 17.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xff00 ata0: mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI 00 00 ata0-slave: ATAPI 00 00 ata0: mask=03 stat0=50 stat1=00 ata0-master: ATA 01 a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xff08 ata1: mask=03 ostat0=50 ostat2=00 ata1-master: ATAPI 14 eb ata1-slave: ATAPI 00 00 ata1: mask=03 stat0=00 stat1=00 ata1: devices=04 ata1: at 0x170 irq 15 on atapci0 uhci0: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 10 at device 17.2 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub0: port error, restarting port 1 uhub0: port error, giving up port 1 uhub0: port error, restarting port 2 uhub0: port error, giving up port 2 uhci1: <VIA 83C572 USB controller> port 0xcc00-0xcc1f irq 10 at device 17.3 on pci0 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub1: port error, restarting port 1 uhub1: port error, giving up port 1 uhub1: port error, restarting port 2 uhub1: port error, giving up port 2 fdc0: output ready timeout fdc0: cmd 3 failed at out byte 1 of 3 sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1: irq maps: 0x1 0x9 0x1 0x1 sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A unknown: not probed (disabled) unknown: not probed (disabled) ppc0: using extended I/O port range ppc0: ECP SPP SPP ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold plip0: <PLIP network interface> on ppbus0 bpf: lp0 attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) psmcpnp0 irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0065 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 3 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 fdc0: output ready timeout fdc0: cmd 3 failed at out byte 1 of 3 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 ex_isa_identify() sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0 adv0 failed to probe on isa0 aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0 failed to probe at port 0x134-0x137 on isa0 aic0 failed to probe at port 0x140-0x15f on isa0 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x330 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x334 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x230 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x234 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x130 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x134 bt0 failed to probe at port 0x134-0x137 on isa0 cs0 failed to probe at port 0x300-0x31f on isa0 ed0 failed to probe at port 0x298-0x2b7 iomem 0xd8000 irq 10 on isa0 fdc0: cannot reserve I/O port range (6 ports) fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 fe0 failed to probe at port 0x300-0x31f on isa0 ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0 le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0 lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0 pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio2: not probed (disabled) sio3: not probed (disabled) sn0: Cannot allocate irq sn0 failed to probe at port 0x300-0x30f irq 10 on isa0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 06 90 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0 failed to probe on isa0 isa_probe_children: probing PnP devices BIOS Geometries: 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. procfs registered Timecounters tick every 10.000 msec bpf: lo0 attached acpi_cpu0: set speed to 100.0% acpi_cpu: CPU throttling enabled, 16 steps from 100% to 6.2% ad0: success setting UDMA5 on VIA chip Creating DISK ad0 ar: FreeBSD check1 failed ad0: <IC35L060AVER07-0/ER6OA46A> ATA-5 disk at ata0-master ad0: 58644MB (120103200 sectors), 119150 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 ad0: piomode=4 dmamode=2 udmamode=5 cblid=1 ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1 ata1-master: success setting PIO4 on generic chip acd0: <TOSHIBA DVD-ROM SD-M1612/1004> DVD-ROM drive at ata1 as master acd0: read 8268KB/s (4782KB/s), 512KB buffer, PIO4 acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, DVD-RAM, packet acd0: Writes: acd0: Audio: play, 16 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc Mounting root from ufs:/dev/ad0s1a ad0s1: type 0xa5, start 63, end = 120101939, size 120101877 : OK start_init: trying /sbin/init ========================================================================== Rebooting... Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #1: Fri Sep 13 14:32:07 PDT 2002 rootk@freebsd.amd.com:/usr/src/sys/i386/compile/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc061f000. Calibrating clock(s) ... TSC clock: 1541331109 Hz, i8254 clock: 1193276 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method Timecounter "TSC" frequency 1541221510 Hz CPU: AMD Athlon(tm) XP 1800+ (1541.22-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x662 Stepping = 2 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xffffffffc0480000<MP,AMIE,DSP,3DNow!> Data TLB: 32 entries, fully associative Instruction TLB: 16 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative real memory = 268369920 (262080K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x00646000 - 0x0ffe7fff, 261758976 bytes (63906 pages) avail memory = 253812736 (247864K bytes) bios32: Found BIOS32 Service Directory header at 0xc00fdb00 bios32: Entry = 0xfdb10 (c00fdb10) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xdb31 pnpbios: Found PnP BIOS data at 0xc00f7990 pnpbios: Entry = f0000:6714 Rev = 1.0 Other BIOS signatures found: null: <null device, zero device> random: <entropy source> mem: <memory & I/O> Pentium Pro MTRR support enabled pci_open(1): mode 1 addr port (0x0cf8) is 0x80010048 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=30991106) Using $PIR table, 10 entries at 0xc00f7fb0 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 1 A 0x01 3 4 5 6 7 10 11 12 14 15 embedded 0 1 B 0x02 3 4 5 6 7 10 11 12 14 15 embedded 0 17 A 0xfe 14 embedded 0 17 B 0xff 15 embedded 0 17 C 0x03 3 4 5 6 7 10 11 12 14 15 embedded 0 17 D 0x05 3 4 5 6 7 10 11 12 14 15 slot 1 0 9 A 0x02 3 4 5 6 7 10 11 12 14 15 slot 1 0 9 B 0x03 3 4 5 6 7 10 11 12 14 15 slot 1 0 9 C 0x05 3 4 5 6 7 10 11 12 14 15 slot 1 0 9 D 0x01 3 4 5 6 7 10 11 12 14 15 slot 2 0 10 A 0x03 3 4 5 6 7 10 11 12 14 15 slot 2 0 10 B 0x05 3 4 5 6 7 10 11 12 14 15 slot 2 0 10 C 0x01 3 4 5 6 7 10 11 12 14 15 slot 2 0 10 D 0x02 3 4 5 6 7 10 11 12 14 15 slot 3 0 11 A 0x05 3 4 5 6 7 10 11 12 14 15 slot 3 0 11 B 0x01 3 4 5 6 7 10 11 12 14 15 slot 3 0 11 C 0x02 3 4 5 6 7 10 11 12 14 15 slot 3 0 11 D 0x03 3 4 5 6 7 10 11 12 14 15 slot 4 0 12 A 0x01 3 4 5 6 7 10 11 12 14 15 slot 4 0 12 B 0x02 3 4 5 6 7 10 11 12 14 15 slot 4 0 12 C 0x03 3 4 5 6 7 10 11 12 14 15 slot 4 0 12 D 0x05 3 4 5 6 7 10 11 12 14 15 slot 5 0 13 A 0x02 3 4 5 6 7 10 11 12 14 15 slot 5 0 13 B 0x03 3 4 5 6 7 10 11 12 14 15 slot 5 0 13 C 0x05 3 4 5 6 7 10 11 12 14 15 slot 5 0 13 D 0x01 3 4 5 6 7 10 11 12 14 15 embedded 0 16 A 0x02 3 4 5 6 7 10 11 12 14 15 embedded 0 19 A 0x03 3 4 5 6 7 10 11 12 14 15 embedded 0 18 A 0x01 3 4 5 6 7 10 11 12 14 15 embedded 0 18 B 0x02 3 4 5 6 7 10 11 12 14 15 embedded 0 18 C 0x03 3 4 5 6 7 10 11 12 14 15 embedded 0 18 D 0x05 3 4 5 6 7 10 11 12 14 15 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base e0000000, size 26, enabled found-> vendor=0x1106, dev=0x3099, revid=0x00 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 powerspec 2 supports D0 D3 current D0 found-> vendor=0x1106, dev=0xb099, revid=0x00 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 map[10]: type 4, range 32, base 0000d800, size 5, enabled found-> vendor=0x1102, dev=0x0002, revid=0x07 bus=0, slot=10, func=0 class=04-01-00, hdrtype=0x00, mfdev=1 intpin=a, irq=10 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000dc00, size 3, enabled found-> vendor=0x1102, dev=0x7002, revid=0x07 bus=0, slot=10, func=1 class=09-80-00, hdrtype=0x00, mfdev=1 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000d400, size 5, enabled map[14]: type 1, range 32, base dfffffe0, size 5, enabled found-> vendor=0x1022, dev=0x2000, revid=0x36 bus=0, slot=12, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=11 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000d000, size 7, enabled map[14]: type 1, range 32, base dfffff00, size 7, enabled found-> vendor=0x10b7, dev=0x9055, revid=0x30 bus=0, slot=13, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=5 powerspec 1 supports D0 D1 D2 D3 current D0 found-> vendor=0x1106, dev=0x3147, revid=0x00 bus=0, slot=17, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 0000ff00, size 4, enabled found-> vendor=0x1106, dev=0x0571, revid=0x06 bus=0, slot=17, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 0000c800, size 5, enabled found-> vendor=0x1106, dev=0x3038, revid=0x23 bus=0, slot=17, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 intpin=d, irq=10 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 0000cc00, size 5, enabled found-> vendor=0x1106, dev=0x3038, revid=0x23 bus=0, slot=17, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 intpin=d, irq=10 powerspec 2 supports D0 D3 current D0 agp0: <VIA Generic host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 agp0: allocating GATT for aperture of size 256M pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x9000-0x9fff pcib1: memory decode 0xdec00000-0xdfcfffff pcib1: prefetched decode 0xdaa00000-0xdeafffff pci1: <PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 3, range 32, base dc000000, size 25, enabled map[14]: type 1, range 32, base dfcfc000, size 14, enabled map[18]: type 1, range 32, base df000000, size 23, enabled found-> vendor=0x102b, dev=0x0525, revid=0x04 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 pci1: <display, VGA> at device 0.0 (no driver attached) pci0: <multimedia, audio> at device 10.0 (no driver attached) pci0: <input device> at device 10.1 (no driver attached) pcn0: <AMD PCnet/PCI 10/100BaseTX> port 0xd400-0xd41f mem 0xdfffffe0-0xdfffffff irq 11 at device 12.0 on pci0 pcn0: Ethernet address: 00:a0:d2:18:32:81 miibus0: <MII bus> on pcn0 lxtphy0: <LXT970 10/100 media interface> on miibus0 lxtphy0: 100baseFX, 100baseFX-FDX, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: pcn0 attached xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xd000-0xd07f mem 0xdfffff00-0xdfffff7f irq 5 at device 13.0 on pci0 xl0: Ethernet address: 00:01:02:3d:4f:7b xl0: media options word: a xl0: found MII/AUTO miibus1: <MII bus> on xl0 xlphy0: <3Com internal media interface> on miibus1 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: xl0 attached isab0: <PCI-ISA bridge> at device 17.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 8233 ATA133 controller> port 0xff00-0xff0f at device 17.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xff00 ata0: mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI 00 00 ata0-slave: ATAPI 00 00 ata0: mask=03 stat0=50 stat1=00 ata0-master: ATA 01 a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xff08 ata1: mask=03 ostat0=50 ostat2=00 ata1-master: ATAPI 14 eb ata1-slave: ATAPI 00 00 ata1: mask=03 stat0=00 stat1=00 ata1: devices=04 ata1: at 0x170 irq 15 on atapci0 uhci0: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 10 at device 17.2 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub0: port error, restarting port 1 uhub0: port error, giving up port 1 uhub0: port error, restarting port 2 uhub0: port error, giving up port 2 uhci1: <VIA 83C572 USB controller> port 0xcc00-0xcc1f irq 10 at device 17.3 on pci0 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub1: port error, restarting port 1 uhub1: port error, giving up port 1 uhub1: port error, restarting port 2 uhub1: port error, giving up port 2 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 ex_isa_identify() pnpbios: 14 devices, largest 126 bytes PNP0a03: adding io range 0x4d0-0x4d1, size=0x2, align=0x1 PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1 PNP0a03: adding io range 0x22-0x22, size=0x1, align=0x1 PNP0a03: adding io range 0x72-0x75, size=0x4, align=0x1 PNP0a03: adding io range 0x400-0x40f, size=0x10, align=0x1 PNP0a03: adding io range 0x800-0x87f, size=0x80, align=0x1 PNP0a03: adding io range 0x880-0x8ff, size=0x80, align=0x1 PNP0a03: adding io range 0x600-0x60f, size=0x10, align=0x1 PNP0a03: adding io range 0x2e-0x2e, size=0x1, align=0x1 PNP0a03: adding io range 0x2f-0x2f, size=0x1, align=0x1 pnpbios: handle 0 device ID PNP0a03 (030ad041) PNP0c01: adding fixed memory32 range 0-0x9fbff, size=0x9fc00 PNP0c01: adding fixed memory32 range 0x9fc00-0x9ffff, size=0x400 PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000 PNP0c01: adding fixed memory32 range 0x100000-0xffeffff, size=0xfef0000 PNP0c01: adding fixed memory32 range 0xfff0000-0xfff7fff, size=0x8000 PNP0c01: adding fixed memory32 range 0xfff8000-0xfffffff, size=0x8000 PNP0c01: adding fixed memory32 range 0xfec00000-0xfec00fff, size=0x1000 PNP0c01: adding fixed memory32 range 0xfee00000-0xfee00fff, size=0x1000 PNP0c01: adding fixed memory32 range 0xfff80000-0xffffffff, size=0x80000 pnpbios: handle 1 device ID PNP0c01 (010cd041) PNP0000: adding fixed io range 0x20-0x21, size=0x2, align=0x1 PNP0000: adding fixed io range 0xa0-0xa1, size=0x2, align=0x1 PNP0000: adding irq mask 0x4 pnpbios: handle 2 device ID PNP0000 (0000d041) PNP0200: adding dma mask 0x10 PNP0200: adding fixed io range 0-0xf, size=0x10, align=0x1 PNP0200: adding fixed io range 0x80-0x90, size=0x11, align=0x1 PNP0200: adding fixed io range 0x94-0x9f, size=0xc, align=0x1 PNP0200: adding fixed io range 0xc0-0xde, size=0x1f, align=0x1 pnpbios: handle 3 device ID PNP0200 (0002d041) PNP0100: adding irq mask 0x1 PNP0100: adding fixed io range 0x40-0x43, size=0x4, align=0x1 pnpbios: handle 4 device ID PNP0100 (0001d041) PNP0b00: adding irq mask 0x100 PNP0b00: adding fixed io range 0x70-0x71, size=0x2, align=0x1 pnpbios: handle 5 device ID PNP0b00 (000bd041) PNP0303: adding irq mask 0x2 PNP0303: adding fixed io range 0x60-0x60, size=0x1, align=0x1 PNP0303: adding fixed io range 0x64-0x64, size=0x1, align=0x1 pnpbios: handle 6 device ID PNP0303 (0303d041) PNP0800: adding fixed io range 0x61-0x61, size=0x1, align=0x1 pnpbios: handle 7 device ID PNP0800 (0008d041) PNP0c04: adding irq mask 0x2000 PNP0c04: adding fixed io range 0xf0-0xff, size=0x10, align=0x1 pnpbios: handle 8 device ID PNP0c04 (040cd041) PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x4 PNP0501: adding irq mask 0x10 pnpbios: handle 9 device ID PNP0501 (0105d041) PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0x8 PNP0501: adding irq mask 0x8 pnpbios: handle 10 device ID PNP0501 (0105d041) PNP0401: adding io range 0x378-0x37f, size=0x8, align=0x4 PNP0401: adding irq mask 0x80 PNP0401: adding dma mask 0x8 pnpbios: handle 11 device ID PNP0401 (0104d041) PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x4 PNP0700: adding irq mask 0x40 PNP0700: adding dma mask 0x4 pnpbios: handle 12 device ID PNP0700 (0007d041) PNP0f13: adding irq mask 0x1000 pnpbios: handle 13 device ID PNP0f13 (130fd041) sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0 adv0 failed to probe on isa0 aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0 failed to probe at port 0x134-0x137 on isa0 aic0 failed to probe at port 0x140-0x15f on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0065 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 3 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x330 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x334 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x230 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x234 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x130 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x134 bt0 failed to probe at port 0x134-0x137 on isa0 cs0 failed to probe at port 0x300-0x31f on isa0 ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0 fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 fe0 failed to probe at port 0x300-0x31f on isa0 ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0 le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0 lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0 pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) pmtimer0 on isa0 ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold plip0: <PLIP network interface> on ppbus0 bpf: lp0 attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x41 0x51 0x41 0x41 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0x41 0x49 0x41 0x41 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: not probed (disabled) sio3: not probed (disabled) sn0: Cannot allocate irq sn0 failed to probe at port 0x300-0x30f irq 10 on isa0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 06 40 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0 failed to probe on isa0 isa_probe_children: probing PnP devices adv1: Invalid baseport of 0x4d0 specified. Nearest valid baseport is 0x330. Failing probe. adv1: Invalid baseport of 0x20 specified. Nearest valid baseport is 0x100. Failing probe. adv1: Invalid baseport of 0x0 specified. Nearest valid baseport is 0x100. Failing probe. adv1: Invalid baseport of 0x40 specified. Nearest valid baseport is 0x100. Failing probe. adv1: Invalid baseport of 0x70 specified. Nearest valid baseport is 0x100. Failing probe. unknown: <PNP0303> can't assign resources (port) unknown: <PNP0303> at port 0x60 on isa0 adv1: Invalid baseport of 0x61 specified. Nearest valid baseport is 0x100. Failing probe. unknown: <PNP0800> failed to probe at port 0x61 on isa0 adv1: Invalid baseport of 0xf0 specified. Nearest valid baseport is 0x100. Failing probe. unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> at port 0x3f8-0x3ff on isa0 unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> at port 0x2f8-0x2ff on isa0 unknown: <PNP0401> can't assign resources (port) unknown: <PNP0401> at port 0x378-0x37f on isa0 unknown: <PNP0700> can't assign resources (port) unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0 unknown: <PNP0f13> can't assign resources (irq) unknown: <PNP0f13> at irq 12 on isa0 BIOS Geometries: 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. procfs registered Timecounters tick every 10.000 msec bpf: lo0 attached ad0: success setting UDMA5 on VIA chip Creating DISK ad0 ar: FreeBSD check1 failed ad0: <IC35L060AVER07-0/ER6OA46A> ATA-5 disk at ata0-master ad0: 58644MB (120103200 sectors), 119150 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 ad0: piomode=4 dmamode=2 udmamode=5 cblid=1 ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1 ata1-master: success setting PIO4 on generic chip acd0: <TOSHIBA DVD-ROM SD-M1612/1004> DVD-ROM drive at ata1 as master acd0: read 8268KB/s (4782KB/s), 512KB buffer, PIO4 acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, DVD-RAM, packet acd0: Writes: acd0: Audio: play, 16 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc Mounting root from ufs:/dev/ad0s1a ad0s1: type 0xa5, start 63, end = 120101939, size 120101877 : OK start_init: trying /sbin/init To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020913231410.GA45974>