Date: Tue, 03 Jan 2006 16:18:23 +0100 From: Christer Folkesson <christer@aqualize.tk> To: freebsd-questions@freebsd.org Subject: FreeBSD 6.0: Problem with network, doesn't use default gateway Message-ID: <43BA95BF.5030903@aqualize.tk>
next in thread | raw e-mail | index | archive | help
Hi, this is my first message to the mailing-list. I hope that I have included enough information about the problem. The problem is that my FreeBSD 6.0 (release) won't use the default route (gateway). So I can't access anything on the internet. Hardware and network equipment: Dell latitude D810 (Pentium M 2.0 GHz, 1.5 GB of primary memory, broadcom gigabit/fast/"normal" ethernet controller). The broadcom chip uses the bge driver. I have looked in the man page for that and no troubles or something like that is mentioned. IPv4 address: 192.168.0.228 /25 The gateway is a netgear RP614 broadband router. IPv4: 192.168.0.199 /25 Also a windows 2003 server is acting as DNS-server for my network. FreeBSD shares the computer with windows XP pro SP2 using dual boot. In windows it works fine so this convince me that it's a software problem in FreeBSD. As said, it works perfectly fine inside the LAN, but not outside. I include a dmesg output (at the bottom) if that is of any importance and also output from ifconfig, netstat -nr, ping and traceroute. I was logged in as root while testing this. Notice that because I'm using an internal DNS-server I can do lookups. Obviously that wouldn't have been possible with the DNS-server provided by my ISP. alcoy# ifconfig bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=1a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING> inet6 fe80::214:22ff:fee1:41be%bge0 prefixlen 64 scopeid 0x1 inet 192.168.0.228 netmask 0xffffff80 broadcast 192.168.0.255 ether 00:14:22:e1:41:be media: Ethernet autoselect (100baseTX <full-duplex> ) status: active lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 inet 127.0.0.1 netmask 0xff000000 alcoy# netstat -nr Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire default 192.168.0.199 UGS 0 52 bge0 127.0.0.1 127.0.0.1 UH 0 52 lo0 192.168.0.128/25 link#1 UC 0 0 bge0 192.168.0.199 00:09:5b:10:de:14 UHLW 2 190 bge0 1182 192.168.0.210 00:05:5d:0c:f8:23 UHLW 1 29 bge0 Internet6: Destination Gateway Flags Netif Expire ::1 ::1 UH lo0 fe80::%bge0/64 link#1 UC bge0 fe80::214:22ff:fee1:41be%bge0 00:14:22:e1:41:be UHL lo0 fe80::%lo0/64 fe80::1%lo0 U lo0 fe80::1%lo0 link#2 UHL lo0 ff01::/32 ::1 U lo0 ff02::%bge0/32 link#1 UC bge0 ff02::%lo0/32 ::1 UC lo0 alcoy# traceroute ping.sunet.se traceroute to ping.sunet.se (130.242.80.31), 64 hops max, 40 byte packets 1 sentinel (192.168.0.199) 0.524 ms 0.518 ms 0.515 ms 2 * * * ^C alcoy# ping sentinel PING router.aqualize.tk (192.168.0.199): 56 data bytes 64 bytes from 192.168.0.199: icmp_seq=0 ttl=250 time=0.669 ms 64 bytes from 192.168.0.199: icmp_seq=1 ttl=250 time=0.679 ms 64 bytes from 192.168.0.199: icmp_seq=2 ttl=250 time=0.673 ms 64 bytes from 192.168.0.199: icmp_seq=3 ttl=250 time=0.673 ms ^C --- router.aqualize.tk ping statistics --- 4 packets transmitted, 4 packets received, 0% packet loss round-trip min/avg/max/stddev = 0.669/0.673/0.679/0.004 ms alcoy# Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-RELEASE #0: Thu Nov 3 09:36:13 UTC 2005 root@x64.samsco.home:/usr/obj/usr/src/sys/GENERIC ACPI APIC Table: <DELL CPi R > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) M processor 2.00GHz (1995.15-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8 Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> Features2=0x180<EST,TM2> AMD Features=0x100000<NX> real memory = 1610448896 (1535 MB) avail memory = 1569087488 (1496 MB) ioapic0: Changing APIC ID to 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <DELL CPi R > on motherboard pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0 pci_link1: <ACPI PCI Link LNKB> irq 10 on acpi0 pci_link2: <ACPI PCI Link LNKC> irq 9 on acpi0 pci_link3: <ACPI PCI Link LNKD> irq 7 on acpi0 pci_link4: <ACPI PCI Link LNKE> on acpi0 pci_link5: <ACPI PCI Link LNKF> on acpi0 pci_link6: <ACPI PCI Link LNKH> on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 battery1: <ACPI Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 bge0: <Broadcom BCM5751 Gigabit Ethernet, ASIC rev. 0x4001> mem 0xdfcf0000-0xdfcfffff irq 16 at device 0.0 on pci2 miibus0: <MII bus> on bge0 brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: Ethernet address: 00:14:22:e1:41:be uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0xbf80-0xbf9f irq 16 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0xbf60-0xbf7f irq 17 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0xbf40-0xbf5f irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0xbf20-0xbf3f irq 19 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xffa80800-0xffa80bff irq 16 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <EHCI (generic) USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci3: <ACPI PCI bus> on pcib3 cbb0: <PCI-CardBus Bridge> at device 1.0 on pci3 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pci3: <simple comms> at device 1.5 (no driver attached) pci3: <network> at device 3.0 (no driver attached) pci0: <multimedia, audio> at device 30.2 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH6 SATA150 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xbfa0-0xbfaf irq 17 at device 31.2 on pci0 atapci0: failed to enable memory mapping! ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model GlidePoint, device ID 0 pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ugen0: vendor 0x413c product 0x8103, rev 2.00/16.57, addr 2 Timecounter "TSC" frequency 1995145893 Hz quality 800 Timecounters tick every 1.000 msec ad0: 76319MB <Seagate ST9808211A 8.03> at ata0-master UDMA100 acd0: DVDR <TSSTcorp DVD+/-RW TS-L532B/DE03> at ata1-master UDMA33 Trying to mount root from ufs:/dev/ad0s3a bge0: link state changed to UP
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?43BA95BF.5030903>