Date: Thu, 17 Aug 2006 10:38:30 -0400 From: Mike Ginsburg <mginsburg@collaborativefusion.com> To: freebsd-questions@freebsd.org Subject: APC BioPod Message-ID: <44E47F66.3040807@collaborativefusion.com>
next in thread | raw e-mail | index | archive | help
Hello, I am looking into using fingerprint authentication on my machine and I have an APC BioPod scanner (usb) to work with. When I plug the scanner into the usb port, dmesg shows the following ugen1: vendor 0x08ff Fingerprint Sensor, rev 1.10/0.00, addr 4 Vendor 0x08ff points to AUTHENTEC The following directories are created /dev/ugen1 /dev/ugen1.1 /dev/ugen1.2 Does anyone know of software that can be used to work with this fingerprint scanner on freeBSD (6.1)? Or even if it is possible to just read the raw data from the stream? Thanks in advance. MikeG Mike Ginsburg Collaborative Fusion, Inc. mginsburg@collaborativefusion.com 412-422-3463 x4015 -- **************************************************************** IMPORTANT: This message contains confidential information and is intended only for the individual named. If the reader of this message is not an intended recipient (or the individual responsible for the delivery of this message to an intended recipient), please be advised that any re-use, dissemination, distribution or copying of this message is prohibited. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission. ****************************************************************
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?44E47F66.3040807>