Date: Mon, 4 Mar 2002 17:39:19 -0600 (CST) From: Blake Freeburg <blakef@votris.mrdata.com> To: freebsd-questions@freebsd.org Subject: AC97 & ECS K7S5A (not found) Message-ID: <200203042339.g24NdJZX038548@votris.mrdata.com>
next in thread | raw e-mail | index | archive | help
Hello, Just wondering if anyone has gotten this to work: The AC97 codec on the ECS Elitegroup K7S5A? (Using a 4.5-stable kernel) Yes, I have 'option pcm' installed, but nothing shows up in dmesg... Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.5-STABLE #3: Mon Feb 18 20:39:46 CST 2002 root@davros.mrdata.com:/usr/obj/disk6/4.5-src/src/sys/MRDATA Timecounter "i8254" frequency 1193182 Hz CPU: AMD Athlon(tm) Processor (896.19-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x642 Stepping = 2 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT, PSE36,MMX,FXSR> AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!> real memory = 805306368 (786432K bytes) avail memory = 777928704 (759696K bytes) Preloaded elf kernel "kernel" at 0xc04fe000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 8 entries at 0xc00f7780 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib2: <PCI to PCI bridge (vendor=1039 device=0001)> at device 1.0 on pci0 pci1: <PCI bus> on pcib2 pci1: <NVidia model 0110 graphics accelerator> at 0.0 irq 0 isab0: <SiS 85c503 PCI-ISA bridge> at device 2.0 on pci0 isa0: <ISA bus> on isab0 ohci0: <SiS 5571 USB controller> mem 0xcfffa000-0xcfffafff irq 5 at device 2.2 on pci0 usb0: OHCI version 1.0, legacy support usb0: <SiS 5571 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: <SiS 5571 USB controller> mem 0xcfffb000-0xcfffbfff irq 11 at device 2.3 on pci0 usb1: OHCI version 1.0, legacy support usb1: <SiS 5571 USB controller> on ohci1 usb1: USB revision 1.0 uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered atapci0: <SiS 5591 ATA100 controller> port 0xff00-0xff0f at device 2.5 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <unknown card> (vendor=0x1039, dev=0x7012) at 2.7 irq 11 sis0: <SiS 900 10/100BaseTX> port 0xc000-0xc0ff mem 0xcfff5000-0xcfff5fff irq 11 a t device 3.0 on pci0 sis0: Ethernet address: 00:07:95:1f:c5:d6 miibus0: <MII bus> on sis0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc0: <ADMtek AN985 10/100BaseTX> port 0xbc00-0xbcff mem 0xcfff4c00-0xcfff4fff irq 11 at device 11.0 on pci0 dc0: Ethernet address: 00:04:5a:53:80:2e miibus1: <MII bus> on dc0 ukphy1: <Generic IEEE 802.3u media interface> on miibus1 ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xb800-0xb83f irq 11 at device 13.0 on pci0 xl0: Ethernet address: 00:60:97:26:50:7d miibus2: <MII bus> on xl0 nsphy0: <DP83840 10/100 media interface> on miibus2 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto atapci1: <Promise TX2 ATA133 controller> port 0xcc00-0xcc0f,0xd000-0xd003,0xd400-0 xd407,0xd800-0xd803,0xdc00-0xdc07 mem 0xcfffc000-0xcfffffff irq 5 at device 15.0 o n pci0 ata2: at 0xdc00 on atapci1 ata3: at 0xd400 on atapci1 bktr0: <BrookTree 878> mem 0xcddfe000-0xcddfefff irq 11 at device 17.0 on pci0 bktr0: Hauppauge Model 38101 B210 bktr0: Hauppauge WinCast/TV, Philips NTSC tuner. pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 17.1 irq 11 pcib1: <SiS 5591 host to AGP bridge> on motherboard pci2: <PCI bus> on pcib1 orm0: <Option ROMs> at iomem 0xc0000-0xcc7ff,0xcc800-0xcefff,0xcf000-0xd6fff on is a0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: failed to get data. psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 unknown: <PNP0000> can't assign resources unknown: <PNP0303> can't assign resources unknown: <PNP0501> can't assign resources unknown: <PNP0501> can't assign resources unknown: <PNP0400> can't assign resources unknown: <PNP0700> can't assign resources unknown: <PNP0f13> can't assign resources IP packet filtering initialized, divert enabled, rule-based forwarding disabled, d efault to deny, logging disabled ad0: 19073MB <Maxtor 2B020H1> [38752/16/63] at ata0-master UDMA100 ad4: 19541MB <Maxtor 52049H4> [39703/16/63] at ata2-master UDMA100 ad5: 29311MB <Maxtor 53073U6> [59554/16/63] at ata2-slave UDMA66 ad6: 117246MB <Maxtor 4G120J6> [238216/16/63] at ata3-master UDMA133 ad7: 114473MB <WDC WD1200BB-00CAA0> [232581/16/63] at ata3-slave UDMA100 acd0: CD-RW <10X4X32> at ata1-master using PIO4 Mounting root from ufs:/dev/ad0s1a Blake -- ... esse quam videri blakef@mrdata.com :email To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200203042339.g24NdJZX038548>