Date: Tue, 16 Jul 2002 07:52:51 +0100 From: "Kjell - LA3SG" <kmidtset@c2i.net> To: freebsd-questions@FreeBSD.org Subject: WinTV card not recognized on AOpen AX-34pro card Message-ID: <3D33D0D3.28796.7EFCEE@localhost>
next in thread | raw e-mail | index | archive | help
I have set up camserv on a box with an Abit VH-6 motherboard,
and it works just fine. This is a snippet from the VH-6 dmesg:
------------
bktr0: <BrookTree 878> mem 0xd8000000-0xd8000fff
irq 5 at device 13.0 on pci0
bktr0: Hauppauge Model 44804 C448
bktr0: Warning - Unknown Hauppauge Tuner 0x30
bktr0: Hauppauge WinCast/TV, Philips PAL I tuner.
pci0: <unknown card> (vendor=0x109e, dev=0x0878)
at 13.1 irq 5
-------------
Installing the same TV card in the same PCI slot on a AOpen AX-
34 Pro box, the corresponding snippet is:
--------------
bktr0: <BrookTree 878> mem 0xd9002000-0xd9002fff
irq 12 at device 11.0 on pci0
bktr0: Hauppauge Model 44804 C448
bktr0: Warning - Unknown Hauppauge Tuner 0x30
bktr0: Hauppauge WinCast/TV, Philips NTSC tuner.
pci0: <unknown card> (vendor=0x109e, dev=0x0878)
at 11.1 irq 12
--------------
camserv now produces a distorted picture. Using the VGA and
Ethernet card from the Abit box makes no difference.
Using the FXTV utility under KDE on the Abit box, it is possible to
select modes. When selecting NTSC I get the same distorted
picture as on the AOpen box, but selecting PAL/N or PAL/BGDHI
produces good pictures.
So why does the AOpen board insist that my TV card is a NTSC
card?
Tnx from Kjell
======dmesg for Abit (working)====================
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988,
1989, 1991, 1992, 1993, 1994
The Regents of the University of California.
All rights reserved.
FreeBSD 4.5-RELEASE #2: Mon Jul 1 21:16:52 CEST
2002
trine@trine.la3sg.net:/usr/src/sys/compile/BKTR
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron
(567.96-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping
= 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE
,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
>
real memory = 100597760 (98240K bytes)
avail memory = 93110272 (90928K bytes)
Preloaded elf kernel "kernel" at 0xc049c000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 7 entries at 0xc00fde20
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI
(AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <NVidia Riva Ultra Vanta TNT2 graphics
accelerator> at 0.0 irq 10
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0
on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port
0xd000-0xd00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-
0xd41f irq 11 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev
1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd800-
0xd81f irq 11 at device 7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev
1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
chip2: <VIA 82C686 AC97 Audio> port 0xe400-
0xe403,0xe000-0xe003,0xdc00-0xdcff irq 9 at
device 7.5 on pci0
ed0: <NE2000 PCI Ethernet (RealTek 8029)> port
0xec00-0xec1f irq 11 at device 9.0 on pci0
ed0: address 00:50:bf:27:c5:e7, type NE2000 (16
bit)
bktr0: <BrookTree 878> mem 0xd8000000-0xd8000fff
irq 5 at device 13.0 on pci0
bktr0: Hauppauge Model 44804 C448
bktr0: Warning - Unknown Hauppauge Tuner 0x30
bktr0: Hauppauge WinCast/TV, Philips PAL I tuner.
pci0: <unknown card> (vendor=0x109e, dev=0x0878)
at 13.1 irq 5
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
fdc0: <NEC 72065B or clone> at port 0x3f0-
0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port
0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df
iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7
on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE
mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
ad0: 39266MB <IBM-DTLA-305040> [79780/16/63] at
ata0-master UDMA66
acd0: CD-RW <HP CD-Writer+ 7100> at ata1-master
using PIO3
Mounting root from ufs:/dev/ad0s1a
==========dmesg from AOpen (not working)========
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988,
1989, 1991, 1992, 1993, 1994
The Regents of the University of California.
All rights reserved.
FreeBSD 4.6-RELEASE #0: Mon Jul 15 21:43:45 CEST
2002
sexy@sexy.la3sg.net:/usr/src/sys/compile/SEXY
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron
(902.05-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping
= 10
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE
,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
>
real memory = 268369920 (262080K bytes)
avail memory = 256258048 (250252K bytes)
Preloaded elf kernel "kernel" at 0xc04c6000.
VESA: v3.0, 32768k memory, flags:0x1, mode
table:0xc0440ea2 (1000022)
VESA: NVidia
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 8 entries at 0xc00fdc10
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI
(AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia Riva Ultra Vanta TNT2 graphics
accelerator> at 0.0 irq 10
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0
on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port
0xc000-0xc00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xc400-
0xc41f irq 11 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev
1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xc800-
0xc81f irq 11 at device 7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev
1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x1106, dev=0x3057)
at 7.4
chip1: <VIA 82C686 AC97 Audio> port 0xd400-
0xd403,0xd000-0xd003,0xcc00-0xccff irq 5 at
device 7.5 on pci0
rl0: <Accton MPX 5030/5038 10/100BaseTX> port
0xdc00-0xdcff mem 0xd9000000-0xd90000ff irq 11
at device 8.0 on pci0
rl0: Ethernet address: 00:04:e2:00:ca:12
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on
miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto
rl1: <RealTek 8139 10/100BaseTX> port 0xe000-
0xe0ff mem 0xd9001000-0xd90010ff irq 11 at
device 9.0 on pci0
rl1: Ethernet address: 00:e0:4c:59:51:bd
miibus1: <MII bus> on rl1
rlphy1: <RealTek internal media interface> on
miibus1
rlphy1: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto
bktr0: <BrookTree 878> mem 0xd9002000-0xd9002fff
irq 12 at device 11.0 on pci0
bktr0: Hauppauge Model 44804 C448
bktr0: Warning - Unknown Hauppauge Tuner 0x30
bktr0: Hauppauge WinCast/TV, Philips NTSC tuner.
pci0: <unknown card> (vendor=0x109e, dev=0x0878)
at 11.1 irq 12
orm0: <Option ROM> at iomem 0xc0000-0xcafff on
isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-
0x3f5,0x3f7 irq 6 drq 2 on isa0
atkbdc0: <Keyboard controller (i8042)> at port
0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df
iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7
on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE
mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
DUMMYNET initialized (011031)
IP packet filtering initialized, divert enabled,
rule-based forwarding disabled, default to
accept, logging limited to 10 packets/entry by
default
IP Filter: v3.4.27 initialized. Default = block
all, Logging = enabled
ad0: 29312MB <Maxtor 33073H3> [59556/16/63] at
ata0-master UDMA100
ad2: DMA limited to UDMA33, non-ATA66 cable or
device
ad2: 38166MB <WDC WD400EB-00CPF0> [77545/16/63]
at ata1-master UDMA33
acd0: CDROM <IDE/ATAPI CD-ROM 52XS> at ata1-
slave PIO4
Mounting root from ufs:/dev/ad0s1a
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3D33D0D3.28796.7EFCEE>