Date: Thu, 15 Jun 2000 06:53:53 -0700 (PDT) From: Matthew Jacob <mjacob@feral.com> To: Ross Law <rossl@outblaze.com> Cc: scsi@freebsd.org Subject: Re: Problem using HP DAT drive under FreeBSD 3.4 Message-ID: <Pine.BSF.4.10.10006150653140.938-100000@beppo.feral.com>
next in thread | raw e-mail | index | archive | help
Try changing the /dev/nrsa0 permissions for the normal user and try loading a tape first othewise. On Thu, 15 Jun 2000, Ross Law wrote: > > Hello, > > Our machine has a HP DAT drive built in. The drive is identified as sa0 > during boot up: > > > Waiting 5 seconds for SCSI devices to settle > sa0 at ahc0 bus 0 target 3 lun 0 > sa0: <HP C1533A A907> Removable Sequential Access SCSI-2 device > sa0: 10.000MB/s transfers (10.000MHz, offset 32) > changing root device to da0s1a > da0 at ahc0 bus 0 target 0 lun 0 > da0: <IBM DNES-309170W SA30> Fixed Direct Access SCSI-3 device > da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing > Enabled > da0: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C) > > > But 'mt -f /dev/nrsa0 status' gives "permission denied" for ordinary > user and "device not configured" for root user. Any suggestions? > > -- > Ross Law > Technical Staff > Outblaze Ltd. > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-scsi" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.10.10006150653140.938-100000>