Date: Mon, 15 Apr 1996 08:03:04 -0500 (CDT) From: John Goerzen <jgoerzen@complete.org> To: freebsd-questions@freebsd.org Subject: Re: PPP problems Message-ID: <199604151303.IAA01069@complete.org>
next in thread | raw e-mail | index | archive | help
Hi,
I'm having problems with PPP demand dialing. It seems to require that I
have run PPP in non-demand mode once before since the last reboot. Then,
sometimes it will cause the remote to hang up sometimes....
Here are relevant configs.
ppp.conf:
default:
set device /dev/cuaa1
set speed 115200
disable lqr
deny lqr
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" ATZ OK-AT-OK \\dATDT\\T TIMEOUT 40 CONNECT"
netspace:
set phone 3679000
set login "TIMEOUT 10 Username: jgoerzen word: xxxxx oundridge ppp\\sdefault"
set timeout 300
set ifaddr 0 206.28.168.21
# add 0 0 206.28.168.21
ppp.linkup:
#
# Otherwide, simply add peer as default gateway.
#
MYADDR:
add 0 0 HISADDR
ppp.secret: I know that one is OK.
In case you are curious, I am a UUCP-connected site -- complete.org
hosts:
127.0.0.1 complete.org complete
127.0.0.1 localhost
127.0.0.1 www.complete.org www
127.0.0.1 news.complete.org news
127.0.0.1 ftp.complete.org
sysconfig
# Set to the name of your host - this is pretty important!
hostname="complete.org"
# Set to the NIS domainname of your host, or NO if none
defaultdomainname=NO
#
# Some broken implementations can't handle the RFC 1323 and RFC 1644
# TCP options. If TCP connections randomly hang, try disabling this,
# and bug the vendor of the losing equipment.
#
tcp_extensions=YES
#
# Set to the list of network devices on this host. You must have an
# ifconfig_${network_interface} line for each interface listed here.
# for example:
#
# network_interfaces="ed0 sl0 lo0"
# ifconfig_ed0="inet 10.0.0.1 netmask 0xffffff00"
# ifconfig_sl0="inet 10.0.1.0 netmask 0xffffff00"
#
network_interfaces="cuaa0 lo0"
ifconfig_cuaa0="inet netmask 255.255.255.0"
ifconfig_lo0="inet localhost"
#
# Set to the list of route add lines for this host. You must have a
# route_${static_routes} line for each static route listed here.
#
static_routes="multicast loopback"
route_multicast="224.0.0.0 -netmask 0xf0000000 -interface ${hostname}"
route_loopback="${hostname} localhost"
# Set to the host you'd like set as your default router, or NO for none.
defaultrouter=NO
# These are the flags you'd like to start the routing daemon with
# routedflags="-q"
routedflags="-q"
# timed flags, or NO if you don't want to start the time daemon
timedflags=NO
# xntpd flags, or NO if you don't want to start the xntpd daemon
xntpdflags="NO"
# this is inoperative unless xntpd is enabled; NO to disable
tickadjflags="-Aq"
# Set to the site you'd like to syncronize your clock from (gatekeeper.dec.com,
# for example) or NO for no such site.
ntpdate="NO"
# Set to YES if you want to run rwhod
rwhod=NO
# Default sendmail flags. -bd is pretty mandatory, -q<n>m sets the queue scan
# time in minutes. If set to NO, don't start sendmail at all.
sendmail_flags="-bd -q30m"
# Set to appropriate flags if you want to use AMD
amdflags="NO"
# Set to YES if this machine will be an NFS client
nfs_client=NO
# Set to YES if this machine will be an NFS server
nfs_server=NO
# Set to appropriate flags if you want to start NIS for a client
nis_clientflags="NO"
# Set to host to ypset to if you need to do that
nis_ypsetflags="NO"
# Set to appropriate flags if you want to start NIS for a server
nis_serverflags="NO"
# Set to appropriate flags for yppasswdd, if you wish to run it.
# Typical flags might be "-m /var/yp/master.passwd -s -f"
yppasswddflags="NO"
# Set to appropriate flags for named, if you have a full-time
# connection to the Internet.
# For most hosts, flags should be "-b /etc/namedb/named.boot"
namedflags="NO"
# Set to YES if you run PC-NFSD (see /usr/ports/net/pcnfsd) for
# sharing filesystems with DOS/Windows PCs.
pcnfsd=NO
# Set to YES if you have the Apache WEB server (see /usr/ports/net/apache)
# installed and want to run it at system startup time (this is better than
# running it from inetd if you're running a dedicated WWW server).
apache_httpd=NO
# Set to YES if you want to run the X-10 power controller daemon
xtend=NO
# Set to the name of the device for kernel crashdumps, or `off' to
# disable any statically configured dumpdev, or NO for no change.
# The device should normally be one of the swap devices specified
# in /etc/fstab.
dumpdev=NO
# Set to YES if you want kernel crashdumps to be saved for debugging
savecore=NO
# Set to YES if you want to run Kerberos authentication
kerberos_server=YES
# If you want this host to be a gateway, set to YES.
gateway=NO
# Set to YES if you want to run gated
gated=NO
# Set to YES if you wish to check quotas. NOTE: For now this probably
# doesn't work and should be left disabled.
check_quotas=YES
# Set to YES to turn on accounting. NOTE: For now this probably
# doesn't work and should be left disabled.
accounting=NO
--
John Goerzen Custom programming | Preserve our 1st Amendment Rights |
| Free Power! Run you computer faster|
Main e-mail: jgoerzen@complete.org | with FreeBSD! http://www.freebsd.org|
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199604151303.IAA01069>