Date: Fri, 10 Jun 2011 10:52:30 -0400 From: John Baldwin <jhb@freebsd.org> To: John <jwd@slowblink.com> Cc: freebsd-current@freebsd.org Subject: Re: NEW_PCIB? pcib1: failed to allocate initial I/O port window: 0x4000-0x4fff Message-ID: <201106101052.30867.jhb@freebsd.org> In-Reply-To: <20110608223037.GA83941@FreeBSD.org> References: <20110606002353.GA2518@slowblink.com> <201106081226.25164.jhb@freebsd.org> <20110608223037.GA83941@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wednesday, June 08, 2011 6:30:37 pm John wrote: > ----- John Baldwin's Original Message ----- > > On Wednesday, June 08, 2011 12:13:05 am John wrote: > > > ----- John Baldwin's Original Message ----- > > > > On Monday, June 06, 2011 9:33:30 pm John wrote: > > > > > ----- John Baldwin's Original Message ----- > > > > > > On Sunday, June 05, 2011 8:23:53 pm John wrote: > > > > > > > > > > > > > > I just attempted to update an HP385G0 system from current as of > > > > > > > 4-15-2011 to 6-2-2011. The new system will not boot, and shows the > > > > > > > following message when it hangs: > > > > > > > > > > I applied your patch/rebuilt/installed/rebooted. The system seems > > > > > to get farther, but still locks up tight. A screen pic is here: > > > > > > > > > > http://people.freebsd.org/~jwd/dmesg.jpg > > > > > > > > > > > > > Hmmm, an MCA is not a good sign. > > > > > > > > Yes, there are multiple ranges. Would it be possible to use a serial port to > > > > capture a full verbose dmesg up to the point where it hangs? > > > > > > > > -- > > > > John Baldwin > > > > > > Hi John > > > > > > Yes, I did get a serial console & ilo configured on the system today. > > > I've attached two verbose consoles. The 1st is from -current as of today > > > which fails to boot. The 2nd is from earlier this year which boot correctly. > > > > Humm, is the first with any patches applied? Earlier you reported a problem > > that occured much later (failing to allocate the initial window) but in > > your new dmesg it isn't getting that far. > > Sorry John, here's the verbose dmesg output with your patch applied. > > This is at the tail of the console: > > pcib1: allocated memory range (0xf6000000-0xf6ffffff) for rid 10 of pci0:1:3:0 > map[14]: type I/O Port, range 32, base 0x4400, size 8, enabled > pcib1: failed to allocate initial I/O port window (0x4000-0x4fff,0x1000) > map[18]: type Memory, range 32, base 0xf5ff0000, size 12, enabled > > > Output ends with a single 'M', not MCA as earlier. Can you revert any patches I've sent you and update to the latest HEAD (I just committed some bugfixes) and try it out please? -- John Baldwin
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201106101052.30867.jhb>