Date: Fri, 13 Nov 1998 02:34:39 -0500 (EST) From: tom@tomqnx.com (Tom Torrance at home) To: hackers@FreeBSD.ORG Subject: pnp/booting problem with new kernel Message-ID: <m0zeDkd-000I0TC@TomQNX.tomqnx.com>
next in thread | raw e-mail | index | archive | help
--ELM910942479-25570-0_ Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit OS = current, cvsup'd today. AWE64 support with Voxware It appears that when a new kernel is installed, the effects of the last pnp statement issued are lost. When I initially booted this kernel, I did: pnp 1 0 enable os port0 0x220 port1 0x300 port2 0x388 irq0 10 drq0 3 drq1 5 pnp 1 1 enable os port0 0x200 pnp 1 2 enable os port0 0x620 port1 0xa20 port2 0xe20 (see attachment 1 for the dmesg) This works fine for all subsequent boots, until after I install a new kernel. At that time, it appears that the effects of the LAST pnp statement issued are lost. The effects of the previously issued pnp statements are still accurately processed (see attachment 2 for the dmesg). Am I misunderstanding how this should work? Tom --ELM910942479-25570-0_ Content-Type: text/plain; charset=ISO-8859-1 Content-Disposition: attachment; filename=pnp0 Content-Description: original dmesg Content-Transfer-Encoding: 7bit DMESG after pnp statements are entered: a fifo ncr0: single-ended, open drain IRQ driver, using on-chip SRAM found-> vendor=0x5333, dev=0x8a01, revid=0x01 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[0]: type 1, range 32, base e0000000, size 26 vga0: <S3 ViRGE DX/GX graphics accelerator> rev 0x01 int a irq 11 on pci0.11.0 Probing for PnP devices: Trying Read_Port at 203 Trying Read_Port at 243 PnP: CSN 1 COMP_DEVICE_ID = 0x2fb0d041 CSN 1 Vendor ID: CTL00c1 [0xc1008c0e] Serial 0x1641e094 Comp ID: PNPb02f [0x2fb0d041] PnP: override config for CSN 1 LDN 0 vend_id 0xc1008c0e port 0x0220 0x0300 0x0388 0x0000 irq 10:0 drq 3:5 en 1 PnP: override config for CSN 1 LDN 1 vend_id 0xc1008c0e port 0x0200 0x0000 0x0000 0x0000 irq 0:0 drq 4:4 en 1 PnP: override config for CSN 1 LDN 2 vend_id 0xc1008c0e port 0x0620 0x0000 0x0000 0x0000 irq 0:0 drq 4:4 en 1 Called nullpnp_probe with tag 0x00000001, type 0xc1008c0e Called nullpnp_probe with tag 0x00000001, type 0x2fb0d041 Probing for devices on the ISA bus: video: RTC equip. code:0x0f, DCC code:0x09 video: CRTC:0x3d4, video option:0x60, rows:80, cols:25, font height:16 video: param table EGA/VGA:0xf00c4644, CGA/MDA:0 video: rows_offset:1 video#0: adapter type:VGA (5), flags:0x7f, CRTC:0x3d4 video#0: init mode:24, bios mode:3, current mode:24 video#0: window:0xf00b8000 size:32k gran:32k, buf:0xf0000000 size:0k video#0: mode:0, flags:0x1 T 40x25, font:8x8, win:0xb8000 video#0: mode:1, flags:0x1 T 40x25, font:8x8, win:0xb8000 video#0: mode:2, flags:0x1 T 80x25, font:8x8, win:0xb8000 video#0: mode:3, flags:0x1 T 80x25, font:8x8, win:0xb8000 video#0: mode:19, flags:0x1 T 40x25, font:8x14, win:0xb8000 video#0: mode:20, flags:0x1 T 40x25, font:8x14, win:0xb8000 video#0: mode:21, flags:0x1 T 80x25, font:8x14, win:0xb8000 video#0: mode:22, flags:0x1 T 80x25, font:8x14, win:0xb8000 video#0: mode:23, flags:0x1 T 40x25, font:8x16, win:0xb8000 video#0: mode:25, flags:0x0 T 80x25, font:8x16, win:0xb0000 video#0: mode:24, flags:0x1 T 80x25, font:8x16, win:0xb8000 video#0: mode:7, flags:0x0 T 80x25, font:8x14, win:0xb0000 video#0: mode:112, flags:0x1 T 80x43, font:8x8, win:0xb8000 video#0: mode:113, flags:0x1 T 80x43, font:8x8, win:0xb8000 video#0: mode:33, flags:0x0 T 80x30, font:8x16, win:0xb0000 video#0: mode:32, flags:0x1 T 80x30, font:8x16, win:0xb8000 video#0: mode:31, flags:0x0 T 80x50, font:8x8, win:0xb0000 video#0: mode:30, flags:0x1 T 80x50, font:8x8, win:0xb8000 video#0: mode:35, flags:0x0 T 80x60, font:8x8, win:0xb0000 video#0: mode:34, flags:0x1 T 80x60, font:8x8, win:0xb8000 video#0: mode:4, flags:0x3 G 320x200x2, 1 plane(s), font:8x8, win:0xb8000 video#0: mode:5, flags:0x3 G 320x200x2, 1 plane(s), font:8x8, win:0xb8000 video#0: mode:6, flags:0x3 G 640x200x1, 1 plane(s), font:8x8, win:0xb8000 video#0: mode:13, flags:0x3 G 320x200x4, 4 plane(s), font:8x8, win:0xa0000 video#0: mode:14, flags:0x3 G 640x200x4, 4 plane(s), font:8x8, win:0xa0000 video#0: mode:15, flags:0x2 G 640x350x4, 4 plane(s), font:8x14, win:0xa0000 video#0: mode:17, flags:0x2 G 640x350x4, 4 plane(s), font:8x14, win:0xa0000 video#0: mode:16, flags:0x3 G 640x350x2, 2 plane(s), font:8x14, win:0xa0000 video#0: mode:18, flags:0x3 G 640x350x4, 4 plane(s), font:8x14, win:0xa0000 video#0: mode:26, flags:0x3 G 640x480x4, 4 plane(s), font:8x16, win:0xa0000 video#0: mode:27, flags:0x3 G 640x480x4, 4 plane(s), font:8x16, win:0xa0000 video#0: mode:28, flags:0x3 G 320x200x8, 1 plane(s), font:8x8, win:0xa0000 video#0: mode:37, flags:0x3 G 320x240x8, 1 plane(s), font:8x8, win:0xa0000 VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: the current keyboard controller command byte 0047 kbdio: DIAGNOSE status:0055 kbdio: TEST_KBD_PORT status:0000 kbdio: RESET_KBD return code:00fa kbdio: RESET_KBD status:00aa sc0: keyboard device ID: ab41 sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> sio0: irq maps: 0x401 0x411 0x401 0x401 sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface bpf: lp0 attached psm0: current command byte:0047 kbdio: TEST_AUX_PORT status:0000 kbdio: RESET_AUX return code:00fa kbdio: RESET_AUX status:00aa kbdio: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 00 00 64 psm: status 00 03 64 psm: status 00 03 64 psm: status 10 00 64 psm: data 08 00 00 psm: data 08 00 00 psm: status 00 02 64 psm0 at 0x60-0x64 irq 12 on motherboard psm0: model Generic PS/2 mouse, device ID 0, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): <QUANTUM FIREBALL ST4.3A> wd0: 4110MB (8418816 sectors), 14848 cyls, 9 heads, 63 S/T, 512 B/S wd0: ATA INQUIRE valid = 0007, dmamword = 0007, apio = 0003, udma = 0407 wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 0 (atapi): <TOSHIBA CD-ROM XM-5302TA/1095>, removable, intr, iordy wcd0: 689KB/sec, 256KB cache, audio play, 255 volume levels, ejectable tray wcd0: 120mm audio disc loaded, unlocked 1 3C5x9 board(s) on ISA found at 0x210 ep0 at 0x210-0x21f irq 5 on isa ep0: aui/bnc[*BNC*] address 00:60:8c:62:a5:65 bpf: ep0 attached sb0 at 0x220 irq 10 drq 3 on isa snd0: <SoundBlaster 16 4.16> sbxvi0 at ? drq 5 on isa snd0: <SoundBlaster 16 4.16> sbmidi0 at 0x300 on isa snd0: <SoundBlaster MPU-401> awe0 at 0x620 on isa awe0: <SoundBlaster EMU8000 MIDI (RAM512k)> opl0 at 0x388 on isa snd0: <Yamaha OPL3 FM> joy0 at 0x200 on isa joy0: joystick npx0 on motherboard npx0: INT 16 interface i586_bzero() bandwidth = 175654312 bytes/sec bzero() bandwidth = 88409512 bytes/sec imasks: bio c008c040, tty c0031092, net c0060020 BIOS Geometries: 0:020afe3f 0..522=523 cylinders, 0..254=255 heads, 1..63=63 sectors 1:03fd893f 0..1021=1022 cylinders, 0..137=138 heads, 1..63=63 sectors 0 accounted for Device configuration finished. Intel Pentium F00F detected, installing workaround bpf: tun0 attached bpf: tun1 attached bpf: tun2 attached bpf: tun3 attached bpf: lo0 attached Waiting 15 seconds for SCSI devices to settle ncr0: restart (scsi reset). (probe5:ncr0:0:5:0): INQUIRY. CDB: 12 1 80 0 ff 0 (probe5:ncr0:0:5:0): ILLEGAL REQUEST asc:24,0 (probe5:ncr0:0:5:0): Invalid field in CDB sks:c0,1 pass0 at ncr0 bus 0 target 0 lun 0 pass0: <SEAGATE ST34555N 0930> Fixed Direct Access SCSI2 device pass0: Serial Number JKA5580002KB3M pass0: 20.0MB/s transfers (20.0MHz, offset 15), Tagged Queueing Enabled pass1 at ncr0 bus 0 target 5 lun 0 pass1: <HP CD-Writer 6020 1.07> Removable CD-ROM SCSI2 device pass1: 3.300MB/s transfers da0 at ncr0 bus 0 target 0 lun 0 da0: <SEAGATE ST34555N 0930> Fixed Direct Access SCSI2 device da0: Serial Number JKA5580002KB3M da0: 20.0MB/s transfers (20.0MHz, offset 15), Tagged Queueing Enabled da0: 4340MB (8888924 512 byte sectors: 255H 63S/T 553C) cd0 at ncr0 bus 0 target 5 lun 0 cd0: <HP CD-Writer 6020 1.07> Removable CD-ROM SCSI2 device cd0: 3.300MB/s transfers cd0: cd present [327689 x 2048 byte records] Considering FFS root f/s. changing root device to da0s1a da0s1: type 0xa5, start 63, end = 8885267, size 8885205 : OK wd0s1: type 0xb, start 63, end = 6152894, size 6152832 : OK wd0s2: type 0x5, start 6152895, end = 8385929, size 2233035 : OK wd0s5: type 0xb, start 6152958, end = 8385929, size 2232972 : OK ffs_mountfs: superblock updated for soft updates Linux-ELF exec handler installed --ELM910942479-25570-0_ Content-Type: text/plain; charset=ISO-8859-1 Content-Disposition: attachment; filename=pnp1 Content-Description: dmesg after installing new kernel Content-Transfer-Encoding: 7bit DMESG after new kernel installed: ebus=0 secondarybus=0 intpin=a, irq=9 map[0]: type 4, range 32, base 0000d400, size 8 map[1]: type 1, range 32, base e7000000, size 8 map[2]: type 1, range 32, base e6800000, size 12 ncr0: <ncr 53c875 fast20 wide scsi> rev 0x03 int a irq 9 on pci0.10.0 ncr0: minsync=12, maxsync=137, maxoffs=16, 128 dwords burst, large dma fifo ncr0: single-ended, open drain IRQ driver, using on-chip SRAM found-> vendor=0x5333, dev=0x8a01, revid=0x01 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[0]: type 1, range 32, base e0000000, size 26 vga0: <S3 ViRGE DX/GX graphics accelerator> rev 0x01 int a irq 11 on pci0.11.0 Initializing PnP override table Probing for PnP devices: Trying Read_Port at 203 Trying Read_Port at 243 PnP: CSN 1 COMP_DEVICE_ID = 0x2fb0d041 CSN 1 Vendor ID: CTL00c1 [0xc1008c0e] Serial 0x1641e094 Comp ID: PNPb02f [0x2fb0d041] Called nullpnp_probe with tag 0x00000001, type 0xc1008c0e Called nullpnp_probe with tag 0x00000001, type 0x2fb0d041 Probing for devices on the ISA bus: video: RTC equip. code:0x0f, DCC code:0x09 video: CRTC:0x3d4, video option:0x60, rows:80, cols:25, font height:16 video: param table EGA/VGA:0xf00c4644, CGA/MDA:0 video: rows_offset:1 video#0: adapter type:VGA (5), flags:0x7f, CRTC:0x3d4 video#0: init mode:24, bios mode:3, current mode:24 video#0: window:0xf00b8000 size:32k gran:32k, buf:0xf0000000 size:0k video#0: mode:0, flags:0x1 T 40x25, font:8x8, win:0xb8000 video#0: mode:1, flags:0x1 T 40x25, font:8x8, win:0xb8000 video#0: mode:2, flags:0x1 T 80x25, font:8x8, win:0xb8000 video#0: mode:3, flags:0x1 T 80x25, font:8x8, win:0xb8000 video#0: mode:19, flags:0x1 T 40x25, font:8x14, win:0xb8000 video#0: mode:20, flags:0x1 T 40x25, font:8x14, win:0xb8000 video#0: mode:21, flags:0x1 T 80x25, font:8x14, win:0xb8000 video#0: mode:22, flags:0x1 T 80x25, font:8x14, win:0xb8000 video#0: mode:23, flags:0x1 T 40x25, font:8x16, win:0xb8000 video#0: mode:25, flags:0x0 T 80x25, font:8x16, win:0xb0000 video#0: mode:24, flags:0x1 T 80x25, font:8x16, win:0xb8000 video#0: mode:7, flags:0x0 T 80x25, font:8x14, win:0xb0000 video#0: mode:112, flags:0x1 T 80x43, font:8x8, win:0xb8000 video#0: mode:113, flags:0x1 T 80x43, font:8x8, win:0xb8000 video#0: mode:33, flags:0x0 T 80x30, font:8x16, win:0xb0000 video#0: mode:32, flags:0x1 T 80x30, font:8x16, win:0xb8000 video#0: mode:31, flags:0x0 T 80x50, font:8x8, win:0xb0000 video#0: mode:30, flags:0x1 T 80x50, font:8x8, win:0xb8000 video#0: mode:35, flags:0x0 T 80x60, font:8x8, win:0xb0000 video#0: mode:34, flags:0x1 T 80x60, font:8x8, win:0xb8000 video#0: mode:4, flags:0x3 G 320x200x2, 1 plane(s), font:8x8, win:0xb8000 video#0: mode:5, flags:0x3 G 320x200x2, 1 plane(s), font:8x8, win:0xb8000 video#0: mode:6, flags:0x3 G 640x200x1, 1 plane(s), font:8x8, win:0xb8000 video#0: mode:13, flags:0x3 G 320x200x4, 4 plane(s), font:8x8, win:0xa0000 video#0: mode:14, flags:0x3 G 640x200x4, 4 plane(s), font:8x8, win:0xa0000 video#0: mode:15, flags:0x2 G 640x350x4, 4 plane(s), font:8x14, win:0xa0000 video#0: mode:17, flags:0x2 G 640x350x4, 4 plane(s), font:8x14, win:0xa0000 video#0: mode:16, flags:0x3 G 640x350x2, 2 plane(s), font:8x14, win:0xa0000 video#0: mode:18, flags:0x3 G 640x350x4, 4 plane(s), font:8x14, win:0xa0000 video#0: mode:26, flags:0x3 G 640x480x4, 4 plane(s), font:8x16, win:0xa0000 video#0: mode:27, flags:0x3 G 640x480x4, 4 plane(s), font:8x16, win:0xa0000 video#0: mode:28, flags:0x3 G 320x200x8, 1 plane(s), font:8x8, win:0xa0000 video#0: mode:37, flags:0x3 G 320x240x8, 1 plane(s), font:8x8, win:0xa0000 VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: the current keyboard controller command byte 0047 kbdio: DIAGNOSE status:0055 kbdio: TEST_KBD_PORT status:0000 kbdio: RESET_KBD return code:00fa kbdio: RESET_KBD status:00aa sc0: keyboard device ID: ab41 sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface bpf: lp0 attached psm0: current command byte:0047 kbdio: TEST_AUX_PORT status:0000 kbdio: RESET_AUX return code:00fa kbdio: RESET_AUX status:00aa kbdio: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 00 00 64 psm: status 00 03 64 psm: status 00 03 64 psm: status 10 00 64 psm: data 08 00 00 psm: data 08 00 00 psm: status 00 02 64 psm0 at 0x60-0x64 irq 12 on motherboard psm0: model Generic PS/2 mouse, device ID 0, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): <QUANTUM FIREBALL ST4.3A> wd0: 4110MB (8418816 sectors), 14848 cyls, 9 heads, 63 S/T, 512 B/S wd0: ATA INQUIRE valid = 0007, dmamword = 0007, apio = 0003, udma = 0407 wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 0 (atapi): <TOSHIBA CD-ROM XM-5302TA/1095>, removable, intr, iordy wcd0: 689KB/sec, 256KB cache, audio play, 255 volume levels, ejectable tray wcd0: 120mm audio disc loaded, unlocked 1 3C5x9 board(s) on ISA found at 0x210 ep0 at 0x210-0x21f irq 5 on isa ep0: aui/bnc[*BNC*] address 00:60:8c:62:a5:65 bpf: ep0 attached sb0 at 0x220 irq 10 drq 3 on isa snd0: <SoundBlaster 16 4.16> sbxvi0 at ? drq 5 on isa snd0: <SoundBlaster 16 4.16> sbmidi0 at 0x300 on isa snd0: <SoundBlaster MPU-401> awe0 at 0x620 on isa AWE32: not detected opl0 at 0x388 on isa snd0: <Yamaha OPL3 FM> joy0 at 0x200 on isa joy0: joystick npx0 on motherboard npx0: INT 16 interface i586_bzero() bandwidth = 175654312 bytes/sec bzero() bandwidth = 88409512 bytes/sec imasks: bio c008c040, tty c0031092, net c0060020 BIOS Geometries: 0:020afe3f 0..522=523 cylinders, 0..254=255 heads, 1..63=63 sectors 1:03fd893f 0..1021=1022 cylinders, 0..137=138 heads, 1..63=63 sectors 0 accounted for Device configuration finished. Intel Pentium F00F detected, installing workaround bpf: tun0 attached bpf: tun1 attached bpf: tun2 attached bpf: tun3 attached bpf: lo0 attached Waiting 15 seconds for SCSI devices to settle ncr0: restart (scsi reset). (probe5:ncr0:0:5:0): INQUIRY. CDB: 12 1 80 0 ff 0 (probe5:ncr0:0:5:0): ILLEGAL REQUEST asc:24,0 (probe5:ncr0:0:5:0): Invalid field in CDB sks:c0,1 pass0 at ncr0 bus 0 target 0 lun 0 pass0: <SEAGATE ST34555N 0930> Fixed Direct Access SCSI2 device pass0: Serial Number JKA5580002KB3M pass0: 20.0MB/s transfers (20.0MHz, offset 15), Tagged Queueing Enabled pass1 at ncr0 bus 0 target 5 lun 0 pass1: <HP CD-Writer 6020 1.07> Removable CD-ROM SCSI2 device pass1: 3.300MB/s transfers da0 at ncr0 bus 0 target 0 lun 0 da0: <SEAGATE ST34555N 0930> Fixed Direct Access SCSI2 device da0: Serial Number JKA5580002KB3M da0: 20.0MB/s transfers (20.0MHz, offset 15), Tagged Queueing Enabled da0: 4340MB (8888924 512 byte sectors: 255H 63S/T 553C) cd0 at ncr0 bus 0 target 5 lun 0 cd0: <HP CD-Writer 6020 1.07> Removable CD-ROM SCSI2 device cd0: 3.300MB/s transfers cd0: cd present [327689 x 2048 byte records] Considering FFS root f/s. changing root device to da0s1a da0s1: type 0xa5, start 63, end = 8885267, size 8885205 : OK wd0s1: type 0xb, start 63, end = 6152894, size 6152832 : OK wd0s2: type 0x5, start 6152895, end = 8385929, size 2233035 : OK wd0s5: type 0xb, start 6152958, end = 8385929, size 2232972 : OK ffs_mountfs: superblock updated for soft updates Linux-ELF exec handler installed --ELM910942479-25570-0_-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?m0zeDkd-000I0TC>